Product Overview
The YW Vertical Sump Sewage Pump, also known as the YW long-shaft sump pump, is a vertical, single-stage, single-suction centrifugal pump for wastewater. The motor is installed above the liquid level and drives an impeller submerged in the wastewater through an extended shaft. The casing, impeller and other wetted components operate below the liquid surface.
Developed from Y-type and sump-pump designs with reference to comparable products, the pump uses either a large-passage impeller or a two-channel impeller. Its open flow passages are designed to handle liquids containing solid particles, long fibers and other debris.
The range includes two main configurations:
YW standard type: Submergence depth of 1–3 m; single-pipe construction.
YWL extended type: Submergence depth of 3–6 m; extended double-pipe construction with an intermediate guide bearing for added operating stability.
Across the series, inlet and outlet sizes range from 25 to 400 mm, flow rates from 10 to 4,800 m³/h, and heads from 10 to 60 m.
Model example: 100YW-15-80-4
- 100: Pump inlet and outlet diameter (mm)
- YW: Vertical sump sewage pump series
- 15: Rated flow rate (m³/h)
- 80: Rated head (m)
- 4: Motor power (kW)
Product Features
1. Non-clogging impeller with strong solids-handling capability
The pump uses either a large-passage impeller or a two-channel impeller. The wide passages are designed to handle solid particles and long-fiber debris.
The stated solids-passage capacity is 30–50% of the discharge diameter for particle diameter, and 3–5 times the discharge diameter for fiber length. The pump is suitable for wastewater containing materials such as fecal matter, rags, gloves and plastic bags.
2. No submerged bearing or dynamic seal - subject to configuration
The product description specifies no bearings or mechanical seals in the submerged section. The casing and impeller are immersed in the liquid, so the pump can start without priming. Axial and radial loads are stated to be supported by rolling bearings above the liquid level, avoiding leakage and contamination.
The detailed construction section also describes a submerged sliding guide bearing. Confirm the bearing arrangement for the specific model before publication or selection.
3. Flexible installation configurations
The pump is available in single-pipe and double-pipe constructions:
The single-pipe YW type is intended for submergence depths of 1–3 m.
The extended double-pipe YWL type is intended for depths of 3–6 m and adds an intermediate guide bearing to improve stability.
Other dimensions and mobile configurations can be designed to suit site requirements.
4. Stable long-shaft drive
The extended shaft connects the motor to the impeller. A thrust ball bearing supports axial load and helps maintain stable operation.
5. Broad material selection
Wetted-part materials can be selected according to the pumped medium, including:
- HT200 cast iron: Neutral wastewater
- ZG25 cast steel: General industrial wastewater
- 1Cr18Ni9Ti, 304, 316 and 316L stainless steel: Corrosive wastewater
- 904 stainless steel: Strongly corrosive media
6. Practical construction and convenient maintenance
The suction inlet faces vertically downward, and the discharge outlet is horizontal. Main components are designed for a high degree of interchangeability among pumps of the same size, helping reduce spare-parts inventory and maintenance costs.
7. Wide wastewater application range
The pump is designed for wastewater containing solids, long fibers and other debris, including municipal sewage, industrial wastewater, construction-site drainage, fecal waste and slurry. The stated maximum medium density is generally 1,100–1,240 kg/m³, and the medium temperature should not exceed 80°C.
Applications
The YW series is used for low-level wastewater lifting, municipal sewage handling and industrial wastewater discharge, including:
Municipal wastewater systems: Wastewater-treatment plants, municipal pumping stations, sewer clearing and river-pollution control.
Construction and civil engineering: Basement drainage, civil-defense drainage stations, foundation-pit dewatering and hotel wastewater removal.
Industrial facilities: Heavily contaminated wastewater from factories and commercial areas, including chemical, dyeing, pharmaceutical, paper, and petroleum-refining plants.
Food processing: Wastewater containing food residues, grease and other debris from food-processing, brewing and sugar-production facilities.
Livestock and aquaculture: Manure wastewater, fish-pond drainage and water exchange, and biogas-digester slurry.
Mining and tunneling: Mine inflow and tunnel-construction wastewater.
Stormwater and emergency drainage: Urban stormwater pumping stations, low-lying areas and temporary emergency drainage.
Buildings and healthcare facilities: Basement wastewater in residential areas and hospital wastewater pumping stations.
Waterworks: Auxiliary water-supply equipment and raw-water transfer.
Technical Specifications
1. Design Standards
The pump is designed and manufactured in accordance with JB/T 6534-92, Technical Conditions for Centrifugal Sewage Pumps, and other applicable standards. Wetted components can be designed and manufactured with reference to relevant national standards according to user requirements.
2. Construction and Operating Principle
The YW is a vertical, single-stage, single-suction, long-shaft centrifugal pump. The motor is installed above the liquid level and drives the submerged impeller through an extended shaft. The suction inlet faces downward, and the discharge outlet faces horizontally.
The motor is directly connected to the pump shaft through a flexible coupling. The detailed construction description states that axial and radial loads are carried by thrust and radial ball bearings above the liquid level, while a submerged sliding guide bearing supports part of the radial load. The guide bearing is cooled and lubricated by the pumped medium.
Submergence depth is 1–6 m, depending on configuration:
- YW single-pipe type: 1–3 m
- YWL extended double-pipe type: 3–6 m, with an intermediate guide bearing in the extended section
3. Impeller Design
The pump uses a large-passage or two-channel impeller. Its wide flow passages are designed to convey wastewater containing solid particles, long fibers and other debris.
4. Bearing System
The shaft-seal position is above the mounting baseplate. The source describes the submerged section as having no mechanical seal. The above-liquid bearing frame contains radial and thrust ball bearings, lubricated by grease or thin oil, to support the pump's axial and radial loads.
The technical description also specifies a submerged guide bearing lubricated and cooled by the pumped medium. Confirm the exact bearing arrangement for the selected model.
5. Wetted-Part Materials
- HT200 cast iron: Neutral wastewater and general industrial wastewater, typically pH 6–9
- ZG25 cast steel: General industrial wastewater
- 1Cr18Ni9Ti: Moderately corrosive wastewater
- 304 stainless steel: General corrosive wastewater; stated pH range 1–14
- 316/316L stainless steel: More demanding service, including some chloride-containing wastewater; improved pitting resistance
- 904 stainless steel: Strongly corrosive media
6. Drive and Direction of Rotation
The motor drives the pump shaft directly through a flexible coupling. Viewed from the motor toward the pump, the specified direction of rotation is counterclockwise.
7. Operating Conditions
- Flow rate (Q): 10–4,800 m³/h across the series
- Head (H): 10–60 m; some configurations are stated to exceed 60 m
- Speed (n): 980, 1,450 or 2,900 r/min, depending on model
- Submergence depth: 1–6 m
- YW: 1–3 m
- YWL: 3–6 m
- Medium temperature: ≤80°C
- Ambient temperature: ≤45°C
- Medium density: ≤1,100–1,240 kg/m³, depending on model
- Inlet and outlet diameter: 25–400 mm
- Motor power: 0.75–75 kW, selected according to operating conditions
- Particle passage: Particle diameter up to 30–50% of the discharge diameter
- Fiber passage: Fiber length up to 3–5 times the discharge diameter
8. Operating Precautions
a. Before starting, confirm that the submerged section is fully immersed and that the liquid level is above the impeller centerline. Do not operate the pump with the liquid level below the impeller.
b. Viewed from the motor toward the pump, the specified direction of rotation is counterclockwise. Do not run the pump in reverse.
c. Before a prolonged shutdown, drain the pump and piping to prevent freeze damage or blockage caused by sediment.
d. For submergence depths greater than 3 m, use the extended double-pipe construction with an intermediate guide bearing.
e. For special corrosive media, provide the medium's name, temperature, concentration, density and viscosity when ordering so that suitable materials and configurations can be selected.
Structural Drawings

Performance Data Tables
|
型号 |
流量 (m³/h) |
扬程 (m) |
转速 (r/min) |
效率 (%) |
电机功率 (kW) |
出口口径 (mm) |
通过颗粒 (mm) |
液下深度 (m) |
重量 (kg) |
|
25YW8-15 |
8 |
15 |
2900 |
45 |
1.5 |
25 |
8 |
1.0~3.0 |
80 |
|
25YW8-22 |
8 |
22 |
2900 |
42 |
2.2 |
25 |
8 |
1.0~3.0 |
90 |
|
25YW8-32 |
8 |
32 |
2900 |
38 |
3 |
25 |
8 |
1.0~3.0 |
100 |
|
32YW5-20 |
5 |
20 |
2900 |
42 |
2.2 |
32 |
10 |
1.0~3.5 |
95 |
|
32YW10-20 |
10 |
20 |
2900 |
45 |
2.2 |
32 |
10 |
1.0~3.5 |
95 |
|
32YW9-30 |
9 |
30 |
2900 |
40 |
3 |
32 |
10 |
1.0~3.5 |
110 |
|
32YW20-12 |
20 |
12 |
2900 |
46 |
2.2 |
32 |
10 |
1.0~3.5 |
95 |
|
40YW10-20 |
10 |
20 |
2900 |
46 |
2.2 |
40 |
12 |
1.0~4.0 |
110 |
|
40YW12-15 |
12 |
15 |
2900 |
48 |
2.2 |
40 |
12 |
1.0~4.0 |
110 |
|
40YW15-30 |
15 |
30 |
2900 |
50 |
3 |
40 |
12 |
1.0~4.0 |
130 |
|
40YW20-40 |
20 |
40 |
2900 |
48 |
7.5 |
40 |
12 |
1.0~4.0 |
160 |
|
50YW10-20 |
10 |
20 |
2900 |
48 |
2.2 |
50 |
15 |
1.0~4.0 |
120 |
|
50YW15-25 |
15 |
25 |
2900 |
50 |
3 |
50 |
15 |
1.0~4.0 |
130 |
|
50YW15-30 |
15 |
30 |
2900 |
48 |
4 |
50 |
15 |
1.0~4.0 |
140 |
|
50YW20-15 |
20 |
15 |
2900 |
52 |
3 |
50 |
15 |
1.0~4.0 |
130 |
|
50YW20-30 |
20 |
30 |
2900 |
50 |
5.5 |
50 |
15 |
1.0~4.0 |
160 |
|
50YW20-35 |
20 |
35 |
2900 |
48 |
7.5 |
50 |
15 |
1.0~4.0 |
180 |
|
50YW25-40 |
25 |
40 |
2900 |
48 |
7.5 |
50 |
15 |
1.0~4.0 |
200 |
|
50YW25-50 |
25 |
50 |
2900 |
45 |
11 |
50 |
15 |
1.0~4.0 |
240 |
|
50YW40-25 |
40 |
25 |
2900 |
52 |
7.5 |
50 |
15 |
1.0~4.0 |
180 |
|
65YW20-15 |
20 |
15 |
2900 |
52 |
3 |
65 |
20 |
1.0~4.5 |
140 |
|
65YW25-18 |
25 |
18 |
2900 |
54 |
4 |
65 |
20 |
1.0~4.5 |
160 |
|
65YW25-30 |
25 |
30 |
2900 |
52 |
5.5 |
65 |
20 |
1.0~4.5 |
180 |
|
65YW25-40 |
25 |
40 |
2900 |
50 |
7.5 |
65 |
20 |
1.0~4.5 |
210 |
|
65YW25-50 |
25 |
50 |
2900 |
48 |
11 |
65 |
20 |
1.0~4.5 |
260 |
|
65YW30-40 |
30 |
40 |
2900 |
52 |
11 |
65 |
20 |
1.0~4.5 |
260 |
|
65YW40-25 |
40 |
25 |
2900 |
55 |
7.5 |
65 |
20 |
1.0~4.5 |
200 |
|
65YW50-30 |
50 |
30 |
2900 |
54 |
11 |
65 |
20 |
1.0~4.5 |
260 |
|
80YW30-22 |
30 |
22 |
2900 |
55 |
5.5 |
80 |
25 |
1.0~5.0 |
200 |
|
80YW30-30 |
30 |
30 |
2900 |
54 |
7.5 |
80 |
25 |
1.0~5.0 |
220 |
|
80YW40-16 |
40 |
16 |
2900 |
56 |
4 |
80 |
25 |
1.0~5.0 |
180 |
|
80YW40-25 |
40 |
25 |
2900 |
55 |
7.5 |
80 |
25 |
1.0~5.0 |
220 |
|
80YW40-32 |
40 |
32 |
2900 |
54 |
11 |
80 |
25 |
1.0~5.0 |
260 |
|
80YW50-30 |
50 |
30 |
2900 |
56 |
11 |
80 |
25 |
1.0~5.0 |
260 |
|
80YW50-40 |
50 |
40 |
2900 |
54 |
15 |
80 |
25 |
1.0~5.0 |
300 |
|
80YW50-50 |
50 |
50 |
2900 |
52 |
18.5 |
80 |
25 |
1.0~5.0 |
340 |
|
80YW65-25 |
65 |
25 |
2900 |
58 |
11 |
80 |
25 |
1.0~5.0 |
260 |
|
80YW80-20 |
80 |
20 |
2900 |
60 |
11 |
80 |
25 |
1.0~5.0 |
260 |
|
100YW50-22 |
50 |
22 |
2900 |
56 |
7.5 |
100 |
30 |
1.0~5.5 |
240 |
|
100YW65-20 |
65 |
20 |
2900 |
58 |
7.5 |
100 |
30 |
1.0~5.5 |
240 |
|
100YW65-30 |
65 |
30 |
2900 |
56 |
11 |
100 |
30 |
1.0~5.5 |
280 |
|
100YW80-15 |
80 |
15 |
2900 |
60 |
7.5 |
100 |
30 |
1.0~5.5 |
240 |
|
100YW80-20 |
80 |
20 |
2900 |
58 |
11 |
100 |
30 |
1.0~5.5 |
280 |
|
100YW80-30 |
80 |
30 |
2900 |
56 |
15 |
100 |
30 |
1.0~5.5 |
320 |
|
100YW80-40 |
80 |
40 |
2900 |
54 |
18.5 |
100 |
30 |
1.0~5.5 |
360 |
|
100YW80-50 |
80 |
50 |
2900 |
52 |
30 |
100 |
30 |
1.0~5.5 |
450 |
|
100YW100-25 |
100 |
25 |
2900 |
60 |
15 |
100 |
30 |
1.0~5.5 |
320 |
|
100YW100-35 |
100 |
35 |
2900 |
58 |
22 |
100 |
30 |
1.0~5.5 |
380 |
|
100YW100-45 |
100 |
45 |
2900 |
56 |
30 |
100 |
30 |
1.0~5.5 |
450 |
|
100YW120-20 |
120 |
20 |
2900 |
62 |
15 |
100 |
30 |
1.0~5.5 |
320 |
|
125YW100-20 |
100 |
20 |
2900 |
62 |
11 |
125 |
40 |
1.0~6.0 |
340 |
|
125YW100-35 |
100 |
35 |
2900 |
60 |
22 |
125 |
40 |
1.0~6.0 |
420 |
|
125YW120-20 |
120 |
20 |
2900 |
64 |
15 |
125 |
40 |
1.0~6.0 |
360 |
|
125YW150-20 |
150 |
20 |
2900 |
66 |
18.5 |
125 |
40 |
1.0~6.0 |
400 |
|
125YW150-30 |
150 |
30 |
2900 |
64 |
30 |
125 |
40 |
1.0~6.0 |
500 |
|
125YW180-25 |
180 |
25 |
2900 |
66 |
30 |
125 |
40 |
1.0~6.0 |
500 |
|
125YW200-15 |
200 |
15 |
2900 |
68 |
18.5 |
125 |
40 |
1.0~6.0 |
400 |
|
150YW130-30 |
130 |
30 |
2900 |
64 |
22 |
150 |
50 |
1.0~6.5 |
460 |
|
150YW150-20 |
150 |
20 |
2900 |
66 |
18.5 |
150 |
50 |
1.0~6.5 |
420 |
|
150YW150-30 |
150 |
30 |
2900 |
64 |
30 |
150 |
50 |
1.0~6.5 |
540 |
|
150YW150-40 |
150 |
40 |
2900 |
62 |
37 |
150 |
50 |
1.0~6.5 |
600 |
|
150YW150-50 |
150 |
50 |
2900 |
60 |
45 |
150 |
50 |
1.0~6.5 |
680 |
|
150YW180-20 |
180 |
20 |
2900 |
66 |
22 |
150 |
50 |
1.0~6.5 |
460 |
|
150YW200-25 |
200 |
25 |
2900 |
66 |
30 |
150 |
50 |
1.0~6.5 |
540 |
|
150YW200-35 |
200 |
35 |
2900 |
64 |
45 |
150 |
50 |
1.0~6.5 |
680 |
|
150YW250-20 |
250 |
20 |
2900 |
68 |
30 |
150 |
50 |
1.0~6.5 |
540 |
|
200YW200-20 |
200 |
20 |
1450 |
68 |
22 |
200 |
60 |
1.0~7.0 |
520 |
|
200YW250-15 |
250 |
15 |
1450 |
70 |
22 |
200 |
60 |
1.0~7.0 |
520 |
|
200YW250-20 |
250 |
20 |
1450 |
68 |
30 |
200 |
60 |
1.0~7.0 |
580 |
|
200YW250-30 |
250 |
30 |
1450 |
66 |
45 |
200 |
60 |
1.0~7.0 |
680 |
|
200YW300-18 |
300 |
18 |
1450 |
70 |
30 |
200 |
60 |
1.0~7.0 |
580 |
|
200YW300-25 |
300 |
25 |
1450 |
68 |
45 |
200 |
60 |
1.0~7.0 |
680 |
|
200YW350-20 |
350 |
20 |
1450 |
72 |
37 |
200 |
60 |
1.0~7.0 |
620 |
|
200YW400-15 |
400 |
15 |
1450 |
72 |
37 |
200 |
60 |
1.0~7.0 |
620 |
|
250YW300-20 |
300 |
20 |
1450 |
70 |
37 |
250 |
70 |
1.0~8.0 |
750 |
|
250YW350-25 |
350 |
25 |
1450 |
70 |
55 |
250 |
70 |
1.0~8.0 |
900 |
|
250YW400-20 |
400 |
20 |
1450 |
72 |
45 |
250 |
70 |
1.0~8.0 |
800 |
|
250YW450-22 |
450 |
22 |
1450 |
70 |
55 |
250 |
70 |
1.0~8.0 |
900 |
|
250YW500-18 |
500 |
18 |
1450 |
72 |
45 |
250 |
70 |
1.0~8.0 |
800 |
|
250YW550-20 |
550 |
20 |
1450 |
70 |
75 |
250 |
70 |
1.0~8.0 |
1050 |
|
300YW400-25 |
400 |
25 |
1450 |
70 |
55 |
300 |
80 |
1.0~8.5 |
1050 |
|
300YW500-20 |
500 |
20 |
1450 |
72 |
55 |
300 |
80 |
1.0~8.5 |
1050 |
|
300YW600-18 |
600 |
18 |
1450 |
74 |
55 |
300 |
80 |
1.0~8.5 |
1050 |
|
300YW600-25 |
600 |
25 |
1450 |
72 |
75 |
300 |
80 |
1.0~8.5 |
1200 |
|
300YW700-20 |
700 |
20 |
1450 |
74 |
75 |
300 |
80 |
1.0~8.5 |
1200 |
|
300YW800-15 |
800 |
15 |
1450 |
76 |
75 |
300 |
80 |
1.0~8.5 |
1200 |
|
350YW600-18 |
600 |
18 |
1450 |
74 |
55 |
350 |
90 |
1.0~9.0 |
1200 |
|
350YW700-20 |
700 |
20 |
1450 |
74 |
75 |
350 |
90 |
1.0~9.0 |
1350 |
|
350YW800-18 |
800 |
18 |
1450 |
76 |
75 |
350 |
90 |
1.0~9.0 |
1350 |
|
350YW900-15 |
900 |
15 |
1450 |
78 |
75 |
350 |
90 |
1.0~9.0 |
1350 |
|
400YW800-20 |
800 |
20 |
1450 |
74 |
90 |
400 |
100 |
1.0~10.0 |
1600 |
|
400YW1000-18 |
1000 |
18 |
1450 |
76 |
90 |
400 |
100 |
1.0~10.0 |
1600 |
|
400YW1200-15 |
1200 |
15 |
1450 |
78 |
90 |
400 |
100 |
1.0~10.0 |
1600 |
|
500YW1200-15 |
1200 |
15 |
1450 |
78 |
90 |
500 |
120 |
1.0~10.0 |
1850 |
|
500YW1500-12 |
1500 |
12 |
1450 |
80 |
90 |
500 |
120 |
1.0~10.0 |
1850 |
|
500YW1800-10 |
1800 |
10 |
1450 |
80 |
90 |
500 |
120 |
1.0~10.0 |
1850 |
|
600YW1500-15 |
1500 |
15 |
980 |
78 |
110 |
600 |
130 |
1.0~12.0 |
2200 |
|
600YW2000-12 |
2000 |
12 |
980 |
80 |
110 |
600 |
130 |
1.0~12.0 |
2200 |
|
600YW2500-10 |
2500 |
10 |
980 |
80 |
132 |
600 |
130 |
1.0~12.0 |
2400 |
If you cannot find the required specifications or model in our product range, please contact us at any time. Our technical specialists will provide prompt model selection assistance and a customized technical solution.
Hot Tags: yw vertical sump sewage pump, China yw vertical sump sewage pump manufacturers, factory


