Product Overview
The AH slurry pump, also known as a heavy-duty slurry pump, is a horizontal, single-stage, single-suction, overhung centrifugal pump. It features a replaceable wear-resistant metal or rubber liner in the casing and an impeller made of wear-resistant metal or rubber. The casing and bearing assembly are bolted to a baseplate. The discharge outlet can be rotated in eight positions at 45° intervals to suit installation requirements.
The series is hydraulically designed using advanced solid-liquid two-phase flow principles, with the aim of minimizing wear. Its flow passages are designed for high efficiency and reduced wear. The product range includes several sub-series: AH (heavy-duty), HH (high-head), M (medium-duty) and L (light-duty). The AH is the heavy-duty version, intended for highly abrasive, high-concentration or high-viscosity slurries.
Model designation example: 4/3D-AH
- 4: Suction diameter, in inches
- 3: Discharge diameter, in inches
- D: Bearing-frame size
- AH: Heavy-duty slurry pump series
Product Features
1. Double-casing construction with replaceable wet-end parts
The pump has a double-casing design. The outer casing is made of cast steel or cast iron; the inner liner and impeller are replaceable and made of high-chrome alloy or rubber. The outer casing retains its pressure-containing function even as the liner wears.
2. Efficient hydraulic design
The pump is hydraulically designed using advanced solid-liquid two-phase flow principles, with an emphasis on reducing wear. Its flow passages are designed for high efficiency and long service life.
3. Choice of impeller designs
Three impeller types are available:
Closed impeller: High efficiency; suitable for fine-particle slurries without fibers.
Open impeller: Greater resistance to clogging; suitable for slurries containing large particles or fibrous material.
Semi-open impeller: Combines features of closed and open impellers.
4. Multiple shaft-seal options
Available shaft-seal arrangements include expeller seals, packing seals and mechanical seals.
Expeller seal: Uses a reverse-pumping expeller to create a pressure that helps prevent slurry leakage. Suitable for slurries with high solids content.
Packing seal: Simple construction and convenient maintenance.
Mechanical seal: Suitable for high-pressure service or applications requiring enhanced sealing performance.
5. Wear-resistant materials for different services
Wet-end materials include high-chrome cast iron (Cr27 and Cr15Mo3), hard nickel cast iron, polyurethane and natural rubber. Material selection depends on the slurry's abrasiveness and corrosiveness. High-chrome cast iron is intended for highly abrasive slurries; rubber materials are intended for less abrasive slurries with some corrosive content.
6. Flexible drive arrangements
The pump can be driven by a V-belt, flexible coupling, gear reducer, fluid coupling or variable-frequency drive. The discharge outlet can be positioned at any of eight angles, in 45° increments.
7. Long bearing life and reliable operation
The cylindrical bearing assembly allows the clearance between the impeller and front liner to be adjusted, simplifying maintenance. Bearings can use grease or oil lubrication. Oil-lubricated configurations can be equipped with a cooling-water system for higher-temperature service.
8. Standardized components and interchangeability
For pumps of the same size, major components-including the bearing frame, shaft, bearings and shaft seal-are designed for a high degree of interchangeability. This can reduce spare-parts inventory and maintenance costs.
Applications
The AH heavy-duty slurry pump is used to transfer abrasive or corrosive slurries in a range of industries, including:
- Mining and mineral processing: Ore slurries, heavy-media suspensions, and process fluids in grinding, classification, magnetic separation and flotation.
- Metallurgy: Slag slurries, slag-granulation water systems and sludge transfer in aluminum production.
- Power generation: Hydraulic ash and slag handling, limestone slurry transfer for flue-gas desulfurization and ash-slurry discharge.
- Coal processing: Heavy-media separation, jigging and coal-slurry water transfer.
- Building materials: Slurry transfer in cement production, and mud transfer in the ceramics and glass industries.
- Chemical and petroleum industries: Corrosive slurries containing crystals or precipitates.
- Water conservancy and dredging: River desilting, channel dredging, mud and sand-water mixtures.
- Tunneling and construction: Slurry transfer during tunneling and sand- or gravel-bearing wastewater handling at construction sites.
Technical Specifications
1. Design Standard
The pump is designed and manufactured in accordance with JB/T 8096-2013, Centrifugal Slurry Pumps. Performance testing for some models may be conducted with reference to ISO 9906, Rotodynamic Pumps-Hydraulic Performance Acceptance Tests.
2. Pump Configuration
Horizontal, single-stage, single-suction, overhung, double-casing centrifugal pump. The casing comprises an outer casing and a replaceable metal or rubber liner. The clearance between the impeller and liner can be adjusted using adjustment bolts on the bearing assembly.
3. Impeller Types
Closed impeller: High efficiency; suitable for fine-particle slurries.
Open impeller: Suitable for slurries containing large particles or fibrous material.
Semi-open impeller: Combines features of closed and open impellers.
4. Shaft-Seal Arrangements
Expeller seal: Consists of an expeller and a shutdown seal. During operation, the expeller creates a pressure that helps prevent leakage; the shutdown seal provides sealing when the pump is stopped.
Packing seal: Consists of a stuffing box, packing rings and a packing gland. Requires shaft-seal water at a pressure 35 kPa above the pump discharge pressure.
Mechanical seal: Suitable for high-pressure service or applications with special sealing requirements.
5. Wet-End Material Selection
High-chrome cast iron (Cr27): A05 / A49; for highly abrasive slurries; pH 5–12.
High-chrome cast iron (Cr15Mo3): A07; for moderately abrasive slurries with some corrosive content.
Hard nickel cast iron: A03; for highly abrasive slurries containing large particles.
Natural rubber: R26 / R55; for mildly abrasive slurries without sharp particles; pH 2–12.
Polyurethane: R33; for moderately abrasive, fine-particle slurries.
6. Drive Arrangements
DC: Direct drive through a flexible coupling; compact, with high transmission efficiency.
CV: V-belt drive; pump speed can be adjusted by changing the pulleys.
CR: Gear-reducer drive; suitable for high-power, low-speed applications.
ZV: Variable-frequency drive for stepless speed control.
TV: Fluid-coupling drive for soft starting and stepless speed control.
7. Bearing Lubrication and Cooling
Grease lubrication: Suitable for small and medium-sized pumps; simple to maintain.
Oil lubrication: Suitable for large pumps or higher-temperature service; a cooling-water system can be added to lower bearing temperature.
8. Operating Conditions
- Flow rate: 3.6–5,400 m³/h
- Head: 5–118 m
- Speed: 200–3,000 r/min
- Maximum particle size: ≤150 mm
- Slurry concentration: ≤60% by weight
- Medium temperature: ≤120°C; ≤60°C for rubber-lined configurations
Structural Drawings

Performance Data Tables
|
Model |
Flow rate Q (m³/h) |
Head H (m) |
Speed (r/min) |
Efficiency η (%) |
Motor power (kW) |
NPSHr (m) |
Maximum particle size (mm) |
Discharge size (mm) |
|
1.5/1B-AH |
10~30 |
30~70 |
1400~2200 |
30~40 |
2.2~15 |
- |
- |
25 |
|
1.5/1C-AH |
10~30 |
20~50 |
1400~2200 |
30~35 |
2.2~11 |
- |
- |
25 |
|
2/1.5B-AH |
15~60 |
30~70 |
1200~1800 |
35~50 |
5.5~30 |
- |
- |
40 |
|
2/1.5C-AH |
15~50 |
20~50 |
1200~1800 |
35~45 |
4~18.5 |
- |
- |
40 |
|
3/2C-AH |
40~100 |
20~55 |
1300~2100 |
40~55 |
5.5~30 |
3 |
19 |
50 |
|
3/2D-AH |
30~80 |
10~40 |
1000~1800 |
40~55 |
3~18.5 |
- |
- |
50 |
|
4/3C-AH |
80~180 |
20~50 |
1300~1900 |
50~70 |
7.5~45 |
3.5 |
32 |
75 |
|
4/3D-AH |
70~160 |
10~35 |
1000~1600 |
50~70 |
5.5~30 |
- |
- |
75 |
|
4/3E-AH |
60~140 |
10~20 |
1000~1600 |
50~65 |
4~15 |
- |
- |
75 |
|
6/4D-AH |
150~350 |
15~50 |
900~1400 |
55~75 |
11~60 |
3.5 |
45 |
100 |
|
6/4E-AH |
120~280 |
10~30 |
900~1400 |
55~70 |
7.5~37 |
4 |
45 |
100 |
|
6/4R-AH |
120~280 |
10~30 |
800~1200 |
55~70 |
5.5~22 |
- |
- |
100 |
|
8/6E-AH |
250~600 |
15~55 |
700~1200 |
60~80 |
15~120 |
4 |
56 |
150 |
|
8/6R-AH |
250~550 |
10~35 |
700~1100 |
60~80 |
11~75 |
4 |
56 |
150 |
|
8/6T-AH |
250~500 |
10~25 |
700~1100 |
60~75 |
7.5~45 |
- |
- |
150 |
|
10/8E-AH |
400~900 |
15~55 |
600~1100 |
65~85 |
22~185 |
4.5 |
63 |
200 |
|
10/8R-AH |
400~850 |
10~35 |
600~1000 |
65~85 |
15~110 |
- |
- |
200 |
|
10/8ST-AH |
400~800 |
10~25 |
600~1000 |
65~80 |
11~75 |
5 |
63 |
200 |
|
12/10E-AH |
600~1400 |
15~55 |
500~900 |
65~85 |
30~250 |
5 |
76 |
250 |
|
12/10ST-AH |
600~1200 |
10~30 |
500~900 |
65~80 |
22~160 |
5 |
76 |
250 |
|
14/12E-AH |
1000~2200 |
15~50 |
500~800 |
65~85 |
55~400 |
5.5 |
89 |
300 |
|
14/12ST-AH |
1000~2000 |
10~30 |
500~800 |
65~80 |
37~250 |
5.5 |
89 |
300 |
|
16/14E-AH |
1400~3000 |
15~50 |
400~700 |
65~85 |
75~560 |
6 |
102 |
350 |
|
16/14ST-AH |
1400~2800 |
10~30 |
400~700 |
65~80 |
55~315 |
- |
- |
350 |
|
18/16E-AH |
1800~3800 |
15~45 |
400~600 |
70~85 |
110~630 |
6.5 |
114 |
400 |
|
18/16ST-AH |
1800~3500 |
10~30 |
400~600 |
70~80 |
75~400 |
- |
- |
400 |
|
20/18E-AH |
2200~4800 |
15~45 |
350~550 |
70~85 |
132~800 |
7 |
127 |
450 |
|
20/18ST-AH |
2200~4500 |
10~30 |
350~550 |
70~80 |
90~500 |
- |
- |
450 |
If you cannot find the required specifications or model in our product range, please contact us at any time. Our technical specialists will provide prompt model selection assistance and a customized technical solution.
Hot Tags: ah slurry pump, China ah slurry pump manufacturers, factory


