Product Overview
The ZE pump is a heavy-duty, single-stage, single-suction, overhung chemical process pump developed for high-temperature, high-pressure and demanding process services. It is an imported-design product intended for petroleum and petrochemical applications, and is designed and manufactured with reference to API 610 (10th or 11th edition), API 682 and VDMA 24297 (heavy-duty).
The pump is horizontally installed, with axial suction and radial discharge. It follows the API 610 OH2 arrangement: an overhung pump with a radially split, back-pull-out casing and centerline mounting. Unlike the foot-mounted ZA (OH1) design, the centerline-supported ZE casing can expand more evenly as its temperature rises, helping reduce thermal distortion and misalignment in high-temperature service.
The hydraulic design has been selected and refined to provide efficient operation, high-temperature and high-pressure capability, and reliable performance. The ZE is one of the heavy-duty petroleum and petrochemical process pump series widely used in China.
Product Features
1. Designed with reference to international standards
The pump is designed and manufactured with reference to API 610 and VDMA 24297 heavy-duty requirements, with mechanical-seal piping plans based on API 682. Suction and discharge flange standards can be selected from GB, DIN, ANSI and other options to suit the installation.
2. Centerline support for high-temperature service
The casing is supported along its centerline. As the pump heats up, it can expand more evenly in both directions from the centerline, helping limit thermal distortion, coupling misalignment and vibration. This arrangement is especially beneficial for pumps with higher heads or larger impellers.
3. Temperature-based cooling arrangements
Standard piping can provide cooling for the centerline support. According to the supplied specification:
At medium temperatures of 200°C or below, bearing-bracket cooling is generally not required.
Above 200°C, the bearing bracket can be air-cooled or water-cooled.
The pump cover has a cooling or heating chamber that can be connected to cooling water or steam when required.
4. Double-volute design and hydraulic balancing
Pump casings with nominal sizes DN 80 and above use a double-volute design to help balance radial forces and limit shaft deflection at the seal.
Axial thrust is hydraulically balanced using front and rear wear rings and balance holes. The replaceable wear rings can be flushed; larger rings use a stepped design to reduce leakage losses.
5. Modular bearing bracket and convenient maintenance
The bearing bracket is available in three configurations: uncooled with cooling fins, fan-cooled, or water-cooled with a cooling jacket. Bearings use oil-bath lubrication, with an automatic oil cup and sight glass for monitoring.
The pump uses an extended diaphragm coupling with a removable spacer section. This allows the rotating assembly to be withdrawn without disconnecting the suction or discharge piping or moving the motor. The series uses nine bearing-bracket sizes, supporting commonality and reduced spare-parts inventory.
6. Multiple sealing options and API 682 piping plans
The seal chamber is designed with reference to API 682. Available options include packing, single or double mechanical seals, and cartridge mechanical seals, with cooling, flushing or seal-fluid systems as required. Seal piping arrangements are selected to suit the service.
The bearings use standard non-contact labyrinth seals. Bearing isolators and pure oil-mist lubrication are available as options.
7. Broad materials range
Wetted-part material options include carbon steel, 12% chromium steel, austenitic stainless steel, 316 stainless steel, duplex stainless steel, 304/304L, 316/316L, CD-4MCu, 904/904L, Hastelloy and titanium alloys. Material selection depends on the medium's composition, concentration and temperature.
8. Impeller options for different services
Closed and open impellers are available:
- Closed impeller: Generally offers high efficiency, low NPSHr and broad operating suitability.
- Open impeller: Intended for services involving gas-liquid two-phase flow or liquids with higher concentrations of suspended solids.
Applications
The ZE pump is intended for clean liquids or liquids containing small amounts of particles; cryogenic or high-temperature liquids; and neutral or corrosive media. The supplied description also lists toxic, flammable and explosive fluids. Such duties require a pump, seal system, materials and installation specifically selected for the associated hazards.
Typical applications include:
- Oil refining and petrochemicals: Refining, cracking, separation and process-fluid transfer.
- Chemical processing: Acids, alkalis, salt solutions and organic compounds.
- Coal processing and cryogenic service: Coal-chemical process fluids and low-temperature liquids.
- Power generation: Plant water supply, condensate recovery and cooling-water circulation.
- Environmental protection and water treatment: Water-treatment plants, seawater desalination, environmental projects and wastewater-treatment systems.
- Metallurgy and paper production: Pulp and paper, sugar production and metallurgical process-fluid transfer.
- Marine and offshore industries: Shipboard systems and offshore process-fluid transfer.
- Heating and air conditioning: Medium- and large-scale heating and air-conditioning systems.
- Synthetic fibers and fertilizers: Synthetic-fiber process fluids and fertilizer solutions.
- Pharmaceuticals and food processing: Pharmaceutical intermediates and food-processing liquids, subject to appropriate material and hygiene requirements.
Technical Specifications
Design Standards
- API 610, OH2 arrangement
- API 682, mechanical-seal piping plans
- VDMA 24297, heavy-duty
- DIN 24256
- ISO 2858
2. Pump Configuration
API 610 OH2 arrangement: horizontal, single-stage, single-suction, overhung pump with centerline support, a radially split back-pull-out casing, horizontal suction and vertical discharge.
3. Operating Conditions
- Rated operating pressure: Up to 5.0 MPa
- Medium temperature: −80°C to +450°C
- Maximum ambient temperature: 40°C
- Direction of rotation: Clockwise when viewed from the motor end toward the pump
- Suitable media: Clean or slightly particle-bearing liquids; low- or high-temperature liquids; neutral or corrosive liquids, including toxic, flammable or explosive media when the pump and sealing system are suitably specified
4. General Performance Range
- Flow rate (Q): 3–2,600 m³/h; some extended models up to 3,000 m³/h
- Head (H): 3–260 m; some models up to 300 m
- Speed (n): 1,450 / 2,900 r/min; direct motor drive or variable-frequency control. Other listed speeds include 1,475 / 2,950 / 980 r/min.
- Operating pressure: ≤5.0 MPa for the heavy-duty design; the ZA series is listed at up to 2.5 MPa
- Medium temperature: −80°C to +450°C; bearing-bracket cooling is generally not required up to 200°C, while air or water cooling is specified above 200°C
- Nominal size range: 25–400 mm, covering inlet and outlet diameters
- Motor power: 0.55–315 kW; higher power is available for extended models
- Motor protection rating: IP54 / IP55 / IP65, as specified
- Motor insulation class: F
Structural Drawings

Performance Data Tables
|
Model |
Speed (r/min) |
Flow rate Q (m³/h) |
Head H (m) |
Efficiency η (%) |
Shaft power (kW) |
Motor power (kW) |
NPSHr (m) |
Impeller diameter (mm) |
|
ZE25-200 |
2950 |
11.5 |
49 |
42 |
3.8 |
5.5 |
1.6 |
209 |
|
1475 |
5.8 |
12 |
38 |
0.55 |
1.1 |
1.2 |
209 |
|
|
ZE40-160 |
2950 |
28 |
33 |
62 |
3 |
5.5 |
3 |
169 |
|
1475 |
14 |
8 |
59 |
0.53 |
1.1 |
0.8 |
169 |
|
|
ZE40-200 |
2950 |
29 |
53 |
58 |
7.5 |
11 |
2.2 |
209 |
|
1475 |
14.5 |
13 |
55 |
1.1 |
1.5 |
0.8 |
209 |
|
|
ZE40-250 |
2950 |
32 |
78 |
53 |
13.5 |
18.5 |
2.2 |
259 |
|
1475 |
16 |
19.5 |
43.5 |
1.8 |
3 |
0.75 |
259 |
|
|
ZE40-315 |
2950 |
42 |
115 |
46 |
30 |
37 |
1.25 |
324 |
|
1475 |
21 |
29 |
42 |
4.5 |
5.5 |
0.5 |
324 |
|
|
ZE50-160 |
2950 |
50 |
34 |
71 |
7 |
11 |
2.4 |
169 |
|
1475 |
25 |
8.4 |
69 |
0.87 |
1.5 |
0.75 |
169 |
|
|
ZE50-200 |
2950 |
62 |
52 |
68 |
13.5 |
18.5 |
2.6 |
209 |
|
1475 |
31 |
13 |
65.5 |
1.7 |
3 |
0.75 |
209 |
|
|
ZE50-250 |
2950 |
70 |
82 |
65 |
24 |
30 |
2.4 |
259 |
|
1475 |
35 |
20 |
62.5 |
3.2 |
4 |
0.7 |
259 |
|
|
ZE50-315 |
2950 |
87 |
115 |
56 |
50 |
55 |
2.2 |
324 |
|
1475 |
44 |
28 |
53 |
6.5 |
11 |
0.5 |
324 |
|
|
ZE50-400 |
2950 |
82 |
194 |
48 |
92 |
110 |
2 |
409 |
|
1475 |
41 |
48 |
45 |
12.7 |
15 |
0.5 |
409 |
|
|
ZE80-160 |
2950 |
94 |
32 |
78 |
11 |
15 |
3 |
169 |
|
1475 |
47 |
8 |
72 |
1.5 |
2.2 |
1.4 |
169 |
|
|
ZE80-200 |
2950 |
103 |
54 |
76 |
20 |
30 |
3.2 |
209 |
|
1475 |
51 |
13.5 |
74 |
2.5 |
4 |
0.8 |
209 |
|
|
ZE80-250 |
2950 |
127 |
82 |
74 |
35 |
45 |
4 |
259 |
|
1475 |
64 |
20 |
72 |
5.4 |
7.5 |
1.3 |
259 |
|
|
ZE80-315 |
2950 |
141 |
127 |
69 |
76 |
90 |
4 |
324 |
|
1475 |
70 |
33 |
66.5 |
10 |
15 |
1 |
324 |
|
|
ZE80-400 |
2950 |
171 |
187 |
61 |
142 |
160 |
3.5 |
409 |
|
1475 |
85 |
46 |
58 |
19 |
22 |
0.8 |
409 |
|
|
ZE100-160 |
2950 |
162 |
32 |
82 |
17.5 |
22 |
4.5 |
169 |
|
1475 |
81 |
8 |
78 |
2.3 |
3 |
2 |
169 |
|
|
ZE100-200 |
2950 |
175 |
50 |
80 |
29.8 |
37 |
3 |
209 |
|
1475 |
88 |
12.5 |
78 |
3.9 |
5.5 |
1.5 |
209 |
|
|
ZE100-250 |
2950 |
230 |
65 |
81 |
62 |
75 |
4 |
259 |
|
1475 |
115 |
16 |
76 |
6.7 |
11 |
1.8 |
259 |
|
|
ZE100-315 |
2950 |
280 |
125 |
75 |
135 |
160 |
4.5 |
324 |
|
1475 |
140 |
32 |
72 |
18 |
22 |
2 |
324 |
|
|
ZE100-400 |
2950 |
280 |
195 |
72 |
206.7 |
250 |
3.2 |
400 |
|
1475 |
140 |
48 |
68 |
27.6 |
37 |
1.8 |
400 |
|
|
ZE100-450 |
2950 |
330 |
252 |
70 |
323.7 |
400 |
5.7 |
450 |
|
ZE100-500 |
2950 |
400 |
300 |
68 |
480 |
560 |
6 |
500 |
|
1475 |
200 |
75 |
65 |
62.8 |
75 |
2.5 |
500 |
|
|
ZE150-200 |
2950 |
310 |
46 |
81 |
48 |
55 |
6 |
209 |
|
1475 |
155 |
12 |
78 |
6.5 |
11 |
2.5 |
209 |
|
|
ZE150-250 |
2950 |
380 |
80 |
80 |
105 |
132 |
5.5 |
259 |
|
1475 |
190 |
20 |
78 |
14.2 |
18.5 |
2.5 |
259 |
|
|
ZE150-315 |
2950 |
440 |
125 |
79 |
195 |
220 |
5 |
324 |
|
1475 |
220 |
32 |
76 |
26 |
37 |
2.5 |
324 |
|
|
ZE150-400 |
2950 |
500 |
195 |
78 |
350 |
400 |
5.5 |
400 |
|
1475 |
250 |
48 |
76 |
44 |
55 |
2.8 |
400 |
|
|
ZE150-560 |
1450 |
400 |
85 |
80 |
118 |
160 |
3.5 |
560 |
|
ZE200-250 |
1450 |
500 |
20 |
80 |
34.5 |
45 |
4 |
259 |
|
ZE200-315 |
1450 |
580 |
32 |
82 |
62 |
75 |
4 |
324 |
|
ZE200-400 |
2950 |
800 |
195 |
82 |
518.4 |
630 |
12.5 |
400 |
|
1450 |
600 |
50 |
82 |
100 |
132 |
3.5 |
400 |
|
|
ZE200-450 |
2950 |
900 |
250 |
80 |
766.4 |
900 |
11.5 |
450 |
|
ZE250-315 |
1450 |
800 |
32 |
84 |
83.5 |
110 |
5 |
324 |
|
ZE250-400 |
1450 |
850 |
50 |
84 |
138.5 |
160 |
4.5 |
400 |
|
ZE250-500 |
1450 |
1000 |
80 |
85 |
260 |
315 |
4.8 |
500 |
|
ZE250-560 |
1450 |
1200 |
100 |
85 |
385 |
450 |
5 |
560 |
|
ZE300-400 |
1450 |
1300 |
50 |
85 |
208 |
250 |
5.5 |
400 |
|
ZE300-450 |
1450 |
1500 |
80 |
86 |
380 |
450 |
5.5 |
450 |
|
ZE300-560 |
1450 |
1800 |
100 |
86 |
575 |
630 |
6 |
560 |
|
ZE350-450 |
1450 |
1900 |
80 |
87 |
475 |
560 |
6 |
450 |
|
ZE350-500 |
1450 |
2100 |
90 |
87 |
590 |
710 |
6.5 |
500 |
|
ZE350-630 |
1450 |
2200 |
125 |
86 |
870 |
1000 |
6.5 |
630 |
|
ZE400-500 |
1450 |
2400 |
80 |
88 |
595 |
710 |
7 |
500 |
|
ZE400-560 |
1450 |
2600 |
100 |
88 |
810 |
1000 |
7 |
560 |
|
ZE400-630 |
1450 |
2600 |
125 |
87 |
1020 |
1250 |
7.5 |
630 |
If you cannot find the required specifications or model in our product range, please contact us at any time. Our technical specialists will provide prompt model selection assistance and a customized technical solution.
Hot Tags: ze high-temperature chemical process pump, China ze high-temperature chemical process pump manufacturers, factory


