IHF Fluoroplastic-Lined Centrifugal Pump

IHF Fluoroplastic-Lined Centrifugal Pump

The IHF pump is a single-stage, single-suction, overhung centrifugal pump designed for corrosive service. It is a horizontal pump with axial suction and radial discharge, manufactured using processes for non-metallic pump components. Its designation, rated performance points and installation dimensions are based on ISO 2858:1975(E), and it can replace some conventional corrosion-resistant centrifugal pumps.
Send Inquiry
Description

Product Overview

 

The IHF pump is a single-stage, single-suction, overhung centrifugal pump designed for corrosive service. It is a horizontal pump with axial suction and radial discharge, manufactured using processes for non-metallic pump components. Its designation, rated performance points and installation dimensions are based on ISO 2858:1975(E), and it can replace some conventional corrosion-resistant centrifugal pumps.

The casing has a metal outer shell lined with fluoroplastic. Wetted components-including the pump cover, impeller and shaft sleeve-are made by molding and sintering fluoroplastic around metal inserts. Some models are designed and manufactured with reference to ISO 15783 and ISO 5199 and meet the requirements of Chinese industry standard HG/T 3183-2012, Technical Specification for Fluoroplastic-Lined Single-Stage, Single-Suction Chemical Centrifugal Pumps.

The hydraulic components are designed using computational fluid dynamics (CFD). The pump has wide flow passages, high efficiency and favorable NPSH performance.

 

Product Features

 

1. Metal casing with fluoroplastic lining

The pump casing has a metal outer shell, typically cast iron or cast steel, lined with fluoroplastic such as F46, PTFE or PFA. This construction combines the pressure-containing strength of metal with a fluoroplastic barrier that isolates the pumped medium from the metal casing.

The pump cover, impeller, shaft sleeve and other wetted components are molded and sintered as fluoroplastic linings over metal inserts, balancing corrosion resistance with structural strength.

2. Corrosion resistance

The fluoroplastic lining is intended for handling acids, alkalis, salt solutions and organic solvents across a wide range of concentrations and temperatures. The source lists sulfuric, hydrochloric, nitric, acetic and hydrofluoric acids, aqua regia, strong alkalis and strong oxidizing agents among the potential media.

Confirm chemical compatibility for the specific medium, concentration and temperature before selection.

3. Externally mounted bellows mechanical seal

The shaft seal uses an externally mounted PTFE bellows mechanical seal. The stationary face can be made of 99.9% alumina ceramic or silicon nitride; the rotating face can be made of filled PTFE or silicon carbide.

For media containing suspended particles, a single hard-face mechanical seal with silicon carbide against silicon carbide can be supplied without cooling water. For fluoride-containing media, pressureless-sintered silicon carbide is available as a seal-face option.

4. Wide temperature range

The standard operating temperature range is −20°C to +150°C. Special configurations are stated to cover temperatures from −85°C to +200°C. The fluoroplastic grade-PTFE, FEP, PFA or F46-should be selected according to the application temperature and chemical service.

5. CFD-optimized hydraulic design

CFD-designed hydraulic components have smooth, wide flow passages intended to reduce hydraulic losses and provide high efficiency and favorable NPSH performance. The pump uses a closed, single-suction impeller to reduce turbulence losses.

6. Compact construction and interchangeability

Two configurations are available: a long-support-frame design with a flexible coupling, and a short-support-frame direct-coupled design. The pump is horizontally installed and can be interchangeable with standardized chemical centrifugal pumps.

The inlet and outlet areas are reinforced with cast-steel sections to improve pressure resistance. Wetted components are integrally molded and sintered to help prevent lining separation and cracking.

7. Material and seal options

Fluoroplastic lining options include F46 (FEP), F4/PTFE and PFA. The choice depends on the medium, operating temperature and cost requirements.

Seal-face options include 99.9% alumina ceramic or silicon nitride for the stationary face, and filled PTFE or silicon carbide for the rotating face. Seal arrangements can be customized for the service conditions.

 

Applications

 

The IHF pump is intended for strongly corrosive liquids that are clean or contain small amounts of solids. Typical applications include:

  • Chemical production: Sulfuric, hydrochloric, nitric, acetic, hydrofluoric and phosphoric acids at various concentrations; chlorine-water handling in membrane-caustic-soda plants; and acid circulation in sulfuric acid concentration processes.
  • Oil refining: Corrosive process liquids and waste-acid handling in petrochemical plants.
  • Pharmaceuticals: Transfer of reaction intermediates containing organic solvents, where corrosion-resistant equipment is required.
  • Metallurgy: Electrolyte transfer in non-ferrous metal production, such as copper-refining copper sulfate solution.
  • Power generation: Circulation of flue-gas-desulfurization slurry and handling of corrosive suspensions containing solids.
  • Environmental protection and water treatment: Industrial wastewater treatment, neutralization of acidic or alkaline wastewater, and acid dosing.
  • Electroplating and pickling: Transfer of plating and pickling solutions.
  • Pulp, paper and textiles: Pulp-bleaching liquids and dyeing wastewater.
  • Pesticides and dyes: Transfer of pesticide concentrates and dye intermediates.
  • Food processing: Corrosive cleaning liquids, subject to selection of suitable food-contact materials.
  • Fertilizer production: Transfer of fertilizer solutions such as ammonium phosphate and potassium sulfate.

 

Technical Specifications

 

Design Standards

  • ISO 2858:1975(E): End-suction centrifugal pumps-designation, nominal duty point and dimensions
  • ISO 15783
  • ISO 5199
  • HG/T 3183-2012: Technical Specification for Fluoroplastic-Lined Single-Stage, Single-Suction Chemical Centrifugal Pumps

 

2. Pump Configuration

Single-stage, single-suction, overhung centrifugal pump, horizontally installed, with axial suction and radial discharge. Available in long-support-frame flexible-coupled and short-support-frame direct-coupled configurations.

3. Construction

The casing has a metal outer shell with a fluoroplastic lining. The pump cover, impeller, shaft sleeve and other wetted components are molded and sintered with fluoroplastic over metal inserts.

4. Operating Conditions

  • Rated operating pressure: Up to 1.6 MPa
  • Medium temperature: −20°C to +150°C standard; special designs from −85°C to +200°C
  • Solids content: For corrosive liquids containing less than 5% solids
  • Direction of rotation: Clockwise, viewed from the motor end toward the pump
  • Listed media: Sulfuric, hydrochloric, nitric, acetic and hydrofluoric acids; aqua regia; strong alkalis and oxidizing agents; organic solvents; and reducing agents

 

5. General Performance Range

  • Flow rate (Q): 3.4–1,080 m³/h; standard range 6.3–400 m³/h
  • Head (H): 3–200 m; standard range 5–132 m
  • Speed (n): 1,450 / 2,900 / 980 r/min; direct motor drive or variable-frequency control
  • Operating pressure: ≤1.6 MPa standard design pressure
  • Medium temperature: −85°C to +200°C stated overall range; −20°C to +150°C standard
  • Inlet diameter: 32–200 mm; standard series 50–200 mm
  • Motor power: 0.55–160 kW, selected according to medium density and viscosity
  • Efficiency: 16–85%, generally increasing with flow rate
  • NPSHr: 2.0–6.0 m, depending on model
  • Motor protection rating: IP54 / IP55 / IP65, as specified
  • Motor insulation class: F

 

Structural Drawings

 

product-1108-689

 

 

Performance Data Tables

 

Table 1: Performance Data with Two-Pole Motor,Speed: 2,900 r/min

No.

Model

Flow rate (m³/h)

Head (m)

Efficiency (%)

NPSHr (m)

Inlet × outlet (mm)

Motor power (kW)

Unit weight (kg)

1

IHF25-20-125

2

20.5

25

2.5

25×20

1.1

75

*3.2

20

32

5.5

18

46

2

IHF25-20-160

2

33

18

2.5

25×20

2.2

85

*3.2

32

25

5.5

30

32

3

IHF25-20-200

2

51

11

3

25×20

4

140

*3.2

50

18

6

49

20

4

IHF25-20-250

2

80

12

2.5

25×20

7.5

225

*3.6

80

18

5.5

78

26

5

IHF32-20-125

2

20.5

25

2.5

32×20

1.1

75

*3.2

20

32

5.5

18

46

6

IHF32-20-160

2

33

18

2.5

32×20

2.2

85

*3.2

32

25

2

30

32

7

IHF32-20-200

2

51

11

3

32×20

4

140

*3.2

50

18

5.5

49

20

8

IHF32-20-250

2

80

12

2.5

25×20

7.5

225

*3.6

80

18

5.5

78

26

9

IHF40-25-125

*6.3

20

30

2.5

40×25

1.5

75

8

20

31

10

18

32

10

IHF40-25-160

*6.3

32

30

3

40×25

3

124

8

32

31

10

30

32

11

IHF40-25-200

*6.3

50

20

3

40×25

5.5

170

8

50

23

10

48

30

12

IHF40-25-250

*6.3

80

20

5

40×32

11

255

8

80

24

12

78

34

13

IHF40-32-250

*6.3

80

20

5

40×32

11

255

8

80

24

12

78

34

14

IHF50-32-125

7

22

47

3.2

50×32

2.2

110

*12.5

20

52

15

16

50

15

IHF50-32-160

7

33

35

3.2

50×32

4

135

*12.5

32

47

15

30

47

16

IHF50-32-200

7

51

28

3.2

50×32

7.5

180

*12.5

50

40

15

49

48

17

IHF50-32-250

7

80

21

5

50×32

11

255

*12.5

80

34

15

77

38

18

IHF65-50-125

15

22

46

3.5

65×50

3

135

*25

20

61

35

16

67

19

IHF65-50-160

15

33

45

3.5

65×50

5.5

155

*25

32

56

35

30

65

20

IHF65-40-200

15

52

35

3.5

65×40

11

210

*25

50

51

35

46

48

21

IHF65-40-250

15

82

33

3.5

65×40

18.5

360

*25

80

48

35

72

50

22

IHF65-40-315

15

127

35

4

65×40

37

475

*25

125

40

35

112

38

23

IHF80-65-125

35

22

52

4

80×65

5.5

195

*50

20

65

60

18

70

24

IHF80-65-160

35

33

60

4

80×65

11

228

*50

32

64

60

27

53

25

IHF80-50-200

35

52

55

4

80×50

15

250

*50

50

63

60

45

55

26

IHF80-50-250

35

82

48

4.5

80×50

30

480

*50

80

56

60

72

50

27

IHF80-50-315

35

127

45

5

80×50

45

 

*50

125

50

60

112

48

28

IHF100-80-125

65

22

62

4.5

100×80

11

245

*100

20

65

120

17

68

29

IHF100-80-160

65

35

65

5

100×80

15

250

*100

32

70

110

26

65

30

IHF100-65-200

65

51

62

5

100×65

30

480

*100

50

68

120

43

56

31

IHF100-65-250

65

82

60

5

100×65

45

550

*100

80

65

120

65

70

32

IHF100-65-315

65

127

55

5.5

100×65

75

860

*100

125

60

120

112

58

33

IHF125-80-160

100

38

57

5

125×80

18.5

460

*160

32

64

180

26

52

34

IHF125-100-200

120

55

63

6

125×100

55

660

*200

50

65

220

45

62

35

IHF125-100-250

120

86

54

6

125×100

75

850

*200

80

68

210

65

61

 

Table 2: Performance Data with Four-Pole Motor,Speed: 1,450 r/min · Design pressure: 1.6 Mpa

No.

Model

Flow rate (m³/h)

Head (m)

Efficiency (%)

NPSHr (m)

Inlet × outlet (mm)

Motor power (kW)

Unit weight (kg)

1

IHF40-25-200

2

13

23

3

40×25

0.6

80

*3.2

13

4

10

2

IHF40-25-250

*3

20

15

5

40×32

1.5

85

4

20

20

6

19.5

30

3

IHF40-32-250

*3

20

15

5

40×32

1.5

85

4

20

20

6

19.5

30

4

IHF50-32-125

3.5

4.5

40

3.2

50×32

0.55

75

*6.3

5

45

7.5

4

42

5

IHF50-32-160

3.5

9

30

3.2

50×32

0.55

95

*6.3

8

40

7.5

7.5

40

6

IHF50-32-200

3.5

12.8

22

3.2

50×32

1.1

105

*6.3

12.5

33

7.5

12.3

40

7

IHF50-32-250

3.5

20

15

5

50×32

1.5

130

*6.3

20

30

7.5

19.3

32

8

IHF50-32-315

4

26

12

4

50×32

4

155

*6.3

25

15

10

22

18

9

IHF65-50-125

7.5

3.8

40

3.5

65×50

0.55

82

*12.5

5

55

17.5

4

61

10

IHF65-50-160

7.5

8.8

40

3.5

65×50

1.1

95

*12.5

8

51

17.5

7.5

60

11

IHF65-40-200

7.5

13

30

3.5

65×40

1.5

115

*12.5

12.5

46

17.5

11.5

42

12

IHF65-40-250

7.5

20.5

28

3.5

65×40

3

145

*12.5

20

43

17.5

18

45

13

IHF65-40-315

7.5

32.5

35

4

65×40

5.5

 

*12.5

32

40

17.5

30

38

14

IHF80-65-125

17.5

5.5

50

4

80×65

1.1

110

*25

5

64

30

4.5

68

15

IHF80-65-160

17.5

8.3

58

4

80×65

1.5

115

*25

8

62

30

6.8

50

16

IHF80-50-200

17.5

13

48

4

80×50

2.2

120

*25

12.5

57

30

11.3

48

17

IHF80-50-250

17.5

20.5

43

4.5

80×50

5.5

145

*25

20

51

30

11.3

45

18

IHF80-50-315

17.5

32.5

45

5

80×50

7.5

 

*25

32

50

30

30

48

19

IHF100-80-125

32.5

5.5

60

4.5

100×80

1.5

130

*50

5

64

60

4.3

65

20

IHF100-80-160

32.5

8.8

62

5

100×80

2.2

140

*50

8

69

55

6.5

62

21

IHF100-65-200

32.5

12.8

62

5

100×65

5.5

330

*50

12.5

68

60

10.8

56

22

IHF100-65-250

32.5

20.5

60

5

100×65

5.5

360

*50

20

65

60

16.3

70

23

IHF100-65-315

32.5

32.5

55

5.5

100×65

11

 

*50

32

60

60

30

58

24

IHF125-80-160

50

9.5

55

5

125×80

5.5

305

*80

8

62

90

6.5

50

25

IHF125-100-200

60

13.8

60

6

125×100

11

380

*100

12.5

64

110

11.3

60

26

IHF125-100-250

60

21

53

6

125×100

15

400

*100

20

69

120

19

71

27

IHF125-100-315

60

32.5

55

6

125×100

22

570

*100

32

60

110

30

58

28

IHF150-125-250

120

22

60

5

150×125

22

500

*200

20

65

240

18

64

29

IHF150-125-315

120

35

54

5

150×125

45

700

*200

32

63

240

30

62

30

IHF200-150-250

240

22

60

5.5

200×150

45

700

*400

20

68

480

17

62

31

IHF200-150-315

240

36 / 32 / 29

55

5.5

200×150

75

1180

*400

32

64

480

29

63

If you cannot find the required specifications or model in our product range, please contact us at any time. Our technical specialists will provide prompt model selection assistance and a customized technical solution.

 

Hot Tags: ihf fluoroplastic-lined centrifugal pump, China ihf fluoroplastic-lined centrifugal pump manufacturers, factory

Send Inquiry