YCB Circular-Arc Gear Pump

YCB Circular-Arc Gear Pump

The YCB series is a horizontal, external-gear positive-displacement rotary pump. It uses a pair of circular-arc-profile gears. Its main components include the casing, driving and driven gears, front and rear covers, shafts, bearings, safety valve and shaft seals.
As the gears rotate, liquid is carried in the spaces between the gear teeth and the casing from the suction side to the discharge side, providing continuous transfer.
Send Inquiry
Description

Product Overview

 

The YCB series is a horizontal, external-gear positive-displacement rotary pump. It uses a pair of circular-arc-profile gears. Its main components include the casing, driving and driven gears, front and rear covers, shafts, bearings, safety valve and shaft seals.

As the gears rotate, liquid is carried in the spaces between the gear teeth and the casing from the suction side to the discharge side, providing continuous transfer.

The pump is intended for non-corrosive, particle-free lubricating oils, fuel oils and similar liquids. The stated operating limits are a temperature of up to 150°C and a viscosity range of 5–1,500 cSt. A built-in safety valve is generally provided to return some liquid from the discharge side to the suction side if pressure exceeds its setting.

 

Model designation example: YCB-1.6

  • Y: Oil-transfer pump designation.
  • CB: Gear-pump series designation.
  • 1.6: Rated flow, in m³/h.

Other designations, such as YCB-3.3 and YCB-8, follow the same convention as stated.

 

Product Features

 

1. Circular-arc gear profile

The circular-arc tooth profile is intended to provide stable meshing, lower sliding speed and good resistance to scuffing. Compared with some involute-gear designs, the source describes the pump as offering quieter operation, higher efficiency and longer service life; actual performance depends on the model and operating conditions.

 

2. Steady flow with low pulsation

The gear arrangement provides continuous displacement and relatively steady flow, with low pressure pulsation for a positive-displacement pump.

 

3. Self-priming capability

The stated self-priming height is up to 5 m. The pump casing should contain some liquid before startup. Actual suction lift depends on liquid viscosity and temperature, suction-line losses, seal condition and installation.

 

4. Compact construction and maintainability

The pump has a relatively simple construction with few main components. The gears and shafts are typically designed as a rigid assembly, supporting mechanical strength and straightforward maintenance.

 

5. Built-in safety valve

The casing contains a differential-type safety valve. When discharge pressure exceeds its setting, the valve opens and returns some liquid to the suction side, helping protect the pump and piping system from overpressure.

 

6. Shaft-seal options

Depending on the fluid and operating conditions, the pump can be supplied with packing or a mechanical seal. A double mechanical seal may be specified for applications requiring additional leakage control or for suitable high-temperature service.

 

7. Explosion-protected motor option

An explosion-protected motor can be specified for suitable hazardous-area applications. The complete installation-including pump, motor, coupling, grounding and process controls-must meet the requirements for the specific hazardous area.

 

Applications

 

The YCB series is used to transfer oils and other lubricating liquids in industries such as:

  • Petroleum and chemicals: Crude oil, heavy oil, diesel, kerosene, gasoline and compatible liquid chemical feedstocks.
  • Oil and fat processing: Vegetable and animal oils, fatty acids and glycerin.
  • Food processing: Edible oils, salad oils and shortening, subject to hygienic materials, seals and approvals.
  • Lubrication systems: Oil-supply systems for machinery and lubrication circuits for large gearboxes.
  • Fuel systems: Boiler-house fuel supply, power-plant ignition systems and marine fuel transfer.
  • Marine service: Fuel-oil, lubricating-oil and cargo-oil transfer, subject to vessel and service requirements.
  • Power generation: Fuel-oil supply and transformer-oil transfer.
  • Road construction: Asphalt transfer and oil supply to road-building equipment, where viscosity and temperature are within the pump's limits.
  • Printing: Printing-ink transfer and varnish supply, where the fluid is compatible with the pump materials and operating range.

 

Technical Specifications

 

1. Operating Principle

The YCB is an external-gear positive-displacement pump. The motor drives the driving gear, which turns the driven gear in the opposite direction.

On the suction side, the gear teeth move out of mesh and the spaces between the teeth increase, creating a low-pressure region into which liquid flows. On the discharge side, the teeth re-engage and the spaces decrease, forcing liquid into the discharge line. Continuous gear rotation provides steady transfer.

 

2. Construction

The pump is a horizontal external-gear design comprising the casing, driving and driven gears, front and rear covers, shafts, bearings, safety valve and shaft seals. The gears have circular-arc tooth profiles. Connection type and port orientation can be configured to suit the piping layout where the design permits.

 

3. Shaft-Seal Options

  • Packing seal: Simple construction and convenient maintenance for general service.
  • Single mechanical seal: For suitable clean-oil applications requiring reliable containment.
  • Double mechanical seal: An option for applications requiring additional leakage control or suitable high-temperature service.

 

4. Safety Valve

The built-in differential-type safety valve opens when discharge pressure exceeds its setting, returning some liquid from the discharge side to the suction side. The source states that the valve is adjusted before shipment and normally does not require user adjustment.

The safety valve is not a substitute for a correctly designed system pressure-relief device. As a positive-displacement pump, the YCB must not be operated against a closed discharge line without appropriate pressure protection.

 

5. Wetted-Part Materials

Component

Material options

Notes

Casing / cover

HT200 cast iron, cast steel, 304 / 316 stainless steel

Select according to the fluid and operating conditions

Gears / shafts

45# carbon steel, 40Cr alloy steel, 304 / 316 stainless steel

45# steel is stated as the standard configuration

Bearings

Copper-alloy plain bearings or rolling bearings

Selected according to model and service

Shaft seal

Packing or mechanical seal

Selected according to the application

 

6. Drive and Rotation

The motor typically drives the pump directly through a flexible coupling. Viewed from the motor end toward the pump, the stated standard rotation is clockwise. Confirm the required rotation direction on the selected model before installation or startup.

 

7. Stated Operating Range

Parameter

Stated range

Flow rate, Q

0.6–60 m³/h across the series

Working pressure

0.6–2.5 MPa, depending on model

Viscosity

5–1,500 cSt; lower speed may allow higher viscosity, subject to confirmation

Medium temperature

Up to 150°C; higher temperatures may require special configuration

Speed, n

910–1,450 r/min; a 4-pole motor is stated as standard

Self-priming height

Up to 5 m, as stated

Motor power

0.75–37 kW, selected for the duty

 

Structural Drawings

 

product-1270-847

Performance Data Tables

 

Model

Flow rate (m³/h)

Discharge pressure (MPa)

Speed (r/min)

Motor power (kW)

Suction port (mm)

Discharge port (mm)

Maximum viscosity (cSt)

Temperature range (°C)

YCB0.6-0.6

0.6

0.6

910

0.75

G1/2″

G1/2″

1500

-20~+80

YCB1.0-0.6

1

0.6

1390

1.1

G3/4″

G3/4″

1500

-20~+80

YCB1.6-0.6

1.6

0.6

1390

1.5

G1″

G1″

1500

-20~+80

YCB2.5-0.6

2.5

0.6

1440

2.2

G1″

G1″

1500

-20~+80

YCB3.3-0.6

3.3

0.6

1440

3

G1½″

G1½″

1500

-20~+80

YCB4-0.6

4

0.6

960

4

G1½″

G1½″

1500

-20~+80

YCB5-0.6

5

0.6

960

5.5

G2″

G2″

1500

-20~+80

YCB6-0.6

6

0.6

960

5.5

G2″

G2″

1500

-20~+80

YCB8-0.6

8

0.6

960

7.5

G2½″

G2½″

1500

-20~+80

YCB10-0.6

10

0.6

960

7.5

G2½″

G2½″

1500

-20~+80

YCB12-0.6

12

0.6

730

11

DN80

DN80

1500

-20~+80

YCB15-0.6

15

0.6

730

11

DN80

DN80

1500

-20~+80

YCB20-0.6

20

0.6

730

15

DN100

DN100

1500

-20~+80

YCB25-0.6

25

0.6

730

18.5

DN100

DN100

1500

-20~+80

YCB30-0.6

30

0.6

730

22

DN125

DN125

1500

-20~+80

YCB40-0.6

40

0.6

730

30

DN125

DN125

1500

-20~+80

YCB45-0.6

45

0.6

740

37

DN150

DN150

1500

-20~+80

YCB55-0.6

55

0.6

740

45

DN150

DN150

1500

-20~+80

YCB70-0.6

70

0.6

740

55

DN200

DN200

1500

-20~+80

YCB0.6-1.2

0.6

1.2

910

1.5

G1/2″

G1/2″

1500

-20~+80

YCB1.0-1.2

1

1.2

1390

2.2

G3/4″

G3/4″

1500

-20~+80

YCB1.6-1.2

1.6

1.2

1390

3

G1″

G1″

1500

-20~+80

YCB2.5-1.2

2.5

1.2

1440

4

G1″

G1″

1500

-20~+80

YCB3.3-1.2

3.3

1.2

1440

5.5

G1½″

G1½″

1500

-20~+80

YCB4-1.2

4

1.2

960

7.5

G1½″

G1½″

1500

-20~+80

YCB5-1.2

5

1.2

960

7.5

G2″

G2″

1500

-20~+80

YCB6-1.2

6

1.2

960

11

G2″

G2″

1500

-20~+80

YCB8-1.2

8

1.2

960

15

G2½″

G2½″

1500

-20~+80

YCB10-1.2

10

1.2

960

15

G2½″

G2½″

1500

-20~+80

YCB0.6-1.6

0.6

1.6

910

2.2

G1/2″

G1/2″

1500

-20~+80

YCB1.0-1.6

1

1.6

1390

3

G3/4″

G3/4″

1500

-20~+80

YCB1.6-1.6

1.6

1.6

1390

4

G1″

G1″

1500

-20~+80

YCB2.5-1.6

2.5

1.6

1440

5.5

G1″

G1″

1500

-20~+80

YCB3.3-1.6

3.3

1.6

1440

7.5

G1½″

G1½″

1500

-20~+80

YCB4-1.6

4

1.6

960

11

G1½″

G1½″

1500

-20~+80

YCB5-1.6

5

1.6

960

11

G2″

G2″

1500

-20~+80

YCB6-1.6

6

1.6

960

15

G2″

G2″

1500

-20~+80

YCB8-1.6

8

1.6

960

18.5

G2½″

G2½″

1500

-20~+80

If you cannot find the required specifications or model in our product range, please contact us at any time. Our technical specialists will provide prompt model selection assistance and a customized technical solution.

 

Hot Tags: ycb circular-arc gear pump, China ycb circular-arc gear pump manufacturers, factory

Send Inquiry