DBY Electric Diaphragm Pump

DBY Electric Diaphragm Pump

The DBY electric diaphragm pump is a positive-displacement pump. An electric motor drives plungers at both ends through a reduction mechanism. The plungers move the diaphragms back and forth, periodically changing the volume of the pump chambers to draw in and discharge liquid.
The drive typically uses a cycloidal pinwheel or worm gearbox. A crank-and-connecting-rod mechanism converts the motor’s rotary motion into reciprocating motion, which moves the diaphragms.
Send Inquiry
Description

Product Overview

 

The DBY electric diaphragm pump is a positive-displacement pump. An electric motor drives plungers at both ends through a reduction mechanism. The plungers move the diaphragms back and forth, periodically changing the volume of the pump chambers to draw in and discharge liquid.

The drive typically uses a cycloidal pinwheel or worm gearbox. A crank-and-connecting-rod mechanism converts the motor's rotary motion into reciprocating motion, which moves the diaphragms.

The DBY is an electrically driven alternative to conventional air-operated diaphragm pumps. It does not require a compressed-air supply and is described as offering lower energy consumption and stable pressure. Pump-body materials can include cast iron, aluminium alloy, stainless steel (304/316/316L), reinforced polypropylene and fluoroplastics (F46/F4). Diaphragm options include nitrile rubber, chloroprene rubber, fluoroelastomer and PTFE.

Model designation example: DBY-40

  • DBY: Electric diaphragm pump series.
  • 40: Pump inlet and outlet diameter, in millimetres.

Some manufacturers include additional flow or head information in the model designation.

 

Product Features

 

1. No compressed-air supply required

The pump is driven by an electric motor, eliminating the need for an air compressor and compressed-air piping. This can reduce equipment, operating and maintenance costs compared with an air-operated pump.

 

2. Handles solids and viscous liquids

The pump has no rotary impeller, and its liquid passages are designed to handle solids, fibres and viscous media. The stated limits are solids up to 10 mm in diameter and viscosity up to 10,000 cP, depending on the model and operating conditions.

 

3. Can run dry briefly

The design permits short periods of dry running without liquid. The allowable duration should be confirmed for the selected model and diaphragm material.

 

4. Diaphragm separates liquid from drive components

The diaphragm isolates the pumped liquid from the mechanical drive, avoiding a conventional dynamic shaft seal in the product-contact area. This makes the pump suitable for applications where leakage containment is important, including the transfer of toxic, hazardous, flammable, volatile or valuable liquids.

 

5. Adjustable flow

Flow can be adjusted by changing motor speed, typically with a variable-frequency drive (VFD). The actual flow response depends on liquid properties, backpressure and valve performance.

 

6. Self-priming capability

The stated self-priming height is up to 7 m. Actual suction lift depends on the liquid's viscosity and temperature, suction-line arrangement, valve condition and pump configuration.

 

7. Options for hazardous-area service

The pump can be supplied with an explosion-protected motor for suitable flammable-liquid applications. The complete installation must meet the applicable hazardous-area requirements.

 

8. Material options

Pump-body materials include cast iron, aluminium alloy, stainless steel, reinforced polypropylene and fluoroplastics. Diaphragm materials include:

  • NBR: Oil-resistant; stated temperature limit up to 80°C.
  • CR: Suitable for some weak acids and alkalis; stated temperature limit up to 80°C.
  • FKM: For selected corrosive media; stated temperature limit up to 150°C.
  • PTFE: For selected strongly corrosive media; stated temperature limit up to 100°C.

Material compatibility depends on the specific chemical, concentration and temperature.

 

9. Smooth, low-speed drive

The cycloidal or worm gearbox reduces output speed to approximately 40–200 r/min. The reduced speed supports steady reciprocating operation; cycloidal drives are noted for their transmission efficiency, while worm drives offer a compact arrangement.

 

Applications

 

The DBY electric diaphragm pump is used to transfer viscous, solids-bearing, corrosive or otherwise challenging liquids in industries such as:

  • Petroleum and chemicals: Crude oil, heavy oil, coal tar, bitumen, paraffin, lubricating grease, acids, alkalis, organic solvents and emulsions.
  • Paints and inks: Paint, coatings, ink, pigment slurry, resin solutions and adhesives.
  • Ceramics and building materials: Ceramic slurry, glaze, cement slurry, putty and gypsum slurry.
  • Food and brewing: Chocolate, syrup, honey, jam, yeast slurry and edible oils, subject to suitable hygienic materials and approvals.
  • Pharmaceuticals and personal care: Ointments, creams, shampoo and other viscous formulations, subject to process and hygiene requirements.
  • Environmental and water treatment: Sludge, dewatered cake, oily wastewater, electroplating wastewater and acid or alkali waste; also used as a feed pump for filter presses.
  • Mining and metallurgy: Mineral slurry, flotation reagents, tailings slurry, electrolytes and pickling solutions.
  • Paper and textile dyeing: Pulp, black liquor, dye slurry and textile wastewater.
  • Construction and tunnelling: Cement grouting, tunnel slurry and shield-tunnelling mud.
  • Temporary and emergency service: Temporary drainage, emergency wastewater transfer and mobile pumping systems.
  • Other applications: Oily bilge-water transfer and cosmetic emulsions.

 

Technical Specifications

 

1. Operating Principle

The motor drives a crank-and-connecting-rod mechanism through a reduction gearbox. The mechanism converts rotary motion into reciprocating plunger motion. The plungers move the flexible diaphragms back and forth, changing the volume of the pump chambers.

  • Suction stroke: The chamber volume increases, creating negative pressure. The inlet valve opens and liquid enters.
  • Discharge stroke: The chamber volume decreases and pressure rises. The inlet valve closes, the discharge valve opens, and liquid is expelled.

The diaphragms separate the pumped liquid from the drive mechanism.

2. Construction

The pump typically comprises:

  • Electric motor
  • Reduction gearbox, either cycloidal pinwheel or worm type
  • Crank-and-connecting-rod mechanism
  • Plungers and diaphragms
  • Pump body
  • Inlet and discharge valves

The inlet and discharge valves are commonly ball-type. Valve balls and seats can be selected according to the pumped medium.

3. Drive and Speed Control

The motor drives the pump through a cycloidal or worm gearbox. The stated reduced output speed is 40–200 r/min. A VFD can be used for stepless speed adjustment and flow control.

4. Wetted-Part Material Options

Component

Material options

Selection considerations

Pump body

Cast iron, aluminium alloy, 304 / 316 / 316L stainless steel, reinforced polypropylene, F46 / F4 fluoroplastics

Select for chemical compatibility, temperature and pressure

Diaphragm

NBR, CR, FKM, PTFE

Select for medium composition and temperature

Valve ball / seat

Stainless steel, ceramic, PTFE, rubber-coated steel ball

Select for chemical compatibility, solids and wear

 

5. Stated Operating Range

Parameter

Stated range

Flow rate, Q

0.5–50 m³/h across the series

Discharge pressure

0–1.0 MPa

Reduced output speed, n

40–200 r/min

Viscosity

≤10,000 cP; higher viscosity may be possible at reduced speed, subject to confirmation

Medium temperature

−20°C to 150°C, depending on diaphragm material

Self-priming height

Up to 7 m, as stated

Allowable particle diameter

1–10 mm, depending on pump size and medium

Inlet/outlet diameter

10–125 mm

Motor power

0.55–15 kW, selected for the duty

 

Structural Drawings

 

product-1108-623

 

 

Performance Data Tables

 

Model

Flow rate (m³/h)

Discharge pressure (MPa)

Motor power (kW)

Inlet/outlet diameter (mm)

Maximum particle size (mm)

Self-priming height (m)

Approximate weight (kg)

DBY-10

0~0.5

0.5

0.37

10

1.5

4~7

60

DBY-15

0~1.0

0.5

0.55

15

2

4~7

70

DBY-25

0~2.0

0.5

0.75/1.1

25

3

4~7

100

DBY-40

0~4.0

0.5

1.5/2.2

40

4.5

4~7

200

DBY-50

0~6.0

0.5

2.2/3.0

50

6

4~7

300

DBY-65

0~8.0

0.5

3.0/4.0

65

8

4~7

400

DBY-80

0~12.0

0.5

4.0/5.5

80

10

4~7

500

DBY-100

0~18.0

0.5

5.5/7.5

100

12

4~7

600

If you cannot find the required specifications or model in our product range, please contact us at any time. Our technical specialists will provide prompt model selection assistance and a customized technical solution.

Hot Tags: dby electric diaphragm pump, China dby electric diaphragm pump manufacturers, factory

Send Inquiry