Product Overview
The stainless steel magnetic drive pump, also referred to as a magnetic pump, is a new-generation industrial pump based on modern magnetic-drive technology.
It uses the magnetic force of permanent magnets to transmit torque without physical contact. When the motor drives the external rotor assembly, or outer magnet assembly, the magnetic field passes through the containment shell and drives the internal rotor assembly, or inner magnet assembly, together with the impeller.
Because the pumped medium is completely enclosed within the stationary containment shell, the pump achieves leak-free liquid transfer. This design eliminates shaft-seal leakage associated with conventional mechanically driven pumps and provides a fully sealed, non-polluting, energy-efficient pumping solution.
The pump's performance conforms to applicable international standards and makes it a suitable alternative to expensive imported chemical pumps.
Product Features
1. Standardized Leak-Free Design
The stainless steel magnetic pump is independently designed and developed in accordance with ISO 2858, GB 5662, and DIN 24256.
It is a fully sealed, leak-free, and pollution-free industrial pump. Its technical performance reaches the advanced level of comparable domestic and international products.
2. Optimized Hydraulic Design
The pump casing, impeller, and pump cover are designed using computational fluid dynamics (CFD) and manufactured through precision casting.
The hydraulic components feature:
- Wide flow passages
- High efficiency
- Good cavitation performance
- Low radial thrust
- Accurate dimensions
- Smooth flow passages
- Good interchangeability
3. High-Performance Magnetic Materials
The magnetic coupling can use ferrite, neodymium-iron-boron, or samarium-cobalt magnets.
These materials provide:
- Strong magnetic properties
- High-temperature resistance
- Good resistance to demagnetization
The magnetic energy product is specified as approximately 28 megagauss-oersteds. The maximum material temperature resistance can reach approximately 350°C. Under conventional cooling conditions, the recommended maximum operating temperature is limited to approximately 260°C.
This helps prevent demagnetization and can provide a theoretical magnetic-material service life of up to 20 years.
4. Wear-Resistant Sliding Components
Shaft sleeves and sliding bearings are available in high-wear-resistance materials, including:
- PEEK
- Silicon carbide
- Graphite
- PTFE
Lubrication grooves are incorporated into the design to improve lubrication conditions and extend service life.
5. Fully Sealed, Leak-Free Operation
All sealing points use enclosed static seals. The pump is driven through a magnetic coupling and does not require nitrogen sealing.
This design provides safe, economical, and efficient operation while effectively eliminating pumped-medium leakage.
6. No External Lubrication or Cooling Water
The pump does not require external lubrication or cooling water under normal operating conditions. This simplifies installation and reduces auxiliary energy consumption.
7. Back-Pull-Out Maintenance Design
The pump adopts an international-standard shaft-coupled back-pull-out design. The rotating assembly can be removed for inspection and maintenance without dismantling the connected piping.
8. Stable Horizontal Operation
The pump is installed horizontally and provides:
- Low vibration
- Low operating noise
- Smooth operation
- Convenient maintenance
- Compatibility with standardized chemical centrifugal pumps
Its international-standard dimensions make replacement and integration easier for users.
9. Synchronous Magnetic Drive
Unlike conventional coupling transmission, the magnetic-drive system provides synchronous torque transmission without direct contact or friction between the driving and driven assemblies.
The resulting advantages include:
- Low power consumption
- High transmission efficiency
- Damping and vibration-reduction effects
- Reduced transmission of motor vibration to the pump
- Reduced transmission of cavitation-induced pump vibration to the motor
Applications
The stainless steel magnetic pump is widely used for transferring corrosive liquids in the following industries and processes:
- Petroleum
- Chemical processing
- Caustic soda production
- Metallurgy
- Rare-earth processing
- Pesticide manufacturing
- Dye production
- Pharmaceutical manufacturing
- Paper production
- Electroplating
- Electrolysis
- Radio and electronic manufacturing
- Anodized aluminum foil production
- Scientific research
- Military and defense-related industries
It is particularly suitable for handling:
- Flammable liquids
- Explosive liquids
- Volatile liquids
- Toxic liquids
- High-temperature liquids
- Strong alkalis
- Organic solvents
- Valuable or high-cost liquids
Technical Specifications
Main Performance Range
|
Parameter |
Specification |
|
Design pressure |
1.6–6.4 MPa |
|
Flow rate |
2–1,400 m³/h |
|
Head |
20–200 m |
|
Motor power |
1.1–400 kW |
|
Standard operating temperature |
−30 to 120°C |
|
Extended temperature range with special materials |
Approximately −50 to 450°C |
Optional Accessories
The following monitoring and protection devices are available as options:
- Temperature monitoring device
- Dry-running protection device
- Leakage monitoring device
Operating Precautions
If the pumped medium has a density greater than the specified limit, this must be stated when placing the order.
Dry running is strictly prohibited.
The pump must not be used to transfer media containing hard particles or crystallized material.
Material compatibility must be confirmed according to the medium's composition, concentration, temperature, and operating pressure.
Structural Drawings

Performance Data Tables
|
Model |
Diameter (mm) |
Flow Rate (m³/h) |
Head |
Motor Power (kW) |
Voltage |
Material |
|
|
Inlet |
Outlet |
(m) |
(V) |
||||
|
B32-20-125 |
32 |
20 |
3.2 |
20 |
1.1 |
380 |
Stainless steel |
|
B32-20-160 |
32 |
20 |
3.2 |
32 |
1.5 |
380 |
|
|
B40-25-125 |
40 |
25 |
6.3 |
20 |
2.2 |
380 |
|
|
B40-25-160 |
40 |
25 |
6.3 |
32 |
3 |
380 |
|
|
B40-25-200 |
40 |
25 |
6.3 |
50 |
5.5 |
380 |
|
|
B50-32-125 |
50 |
32 |
12.5 |
20 |
3 |
380 |
|
|
B50-32-160 |
50 |
32 |
12.5 |
32 |
4 |
380 |
|
|
B50-32-200 |
50 |
32 |
12.5 |
50 |
7.5 |
380 |
|
|
B50-32-250 |
50 |
32 |
12.5 |
80 |
18.5 |
380 |
|
|
B65-50-125 |
65 |
50 |
25 |
20 |
4 |
380 |
|
|
B65-50-160 |
65 |
50 |
25 |
32 |
7.5 |
380 |
|
|
B65-40-200 |
65 |
40 |
25 |
50 |
15 |
380 |
|
|
B65-40-250 |
65 |
40 |
25 |
80 |
18.5 |
380 |
|
|
B80-65-125 |
80 |
65 |
50 |
20 |
7.5 |
380 |
|
|
B80-65-160 |
80 |
65 |
50 |
32 |
15 |
380 |
|
|
B80-50-200 |
80 |
50 |
50 |
50 |
18.5 |
380 |
|
|
B80-50-250 |
80 |
50 |
50 |
80 |
37 |
380 |
|
|
B100-80-125 |
100 |
80 |
100 |
20 |
15 |
380 |
|
|
B100-80-160 |
100 |
80 |
100 |
32 |
18.5 |
380 |
|
|
B100-65-200 |
100 |
65 |
100 |
50 |
37 |
380 |
|
|
B100-65-250 |
100 |
65 |
100 |
80 |
55 |
380 |
|
|
Note: Explosion-proof motors are available for all models. |
|||||||
If you cannot find the required specifications or model in our product range, please contact us at any time. Our technical specialists will provide prompt model selection assistance and a customized technical solution.
Hot Tags: stainless steel magnetic drive pump, China stainless steel magnetic drive pump manufacturers, factory


