Product Overview
The WB vortex pump is designed to transfer liquids at −20°C to +80°C with a viscosity not exceeding 5°E. The liquid should contain no solid particles and may be non-corrosive or mildly corrosive, depending on the selected materials.
The series includes more than ten single-stage, cantilever-type models, including 20WB-20, 25WB-25, 32WB-30, 40WB-40, 50WB-45, 65WB-50, 20WB-65, 25WB-70, 32WB-75, 40WB-90 and 40WB-120.
Wetted parts are available in four material options:
|
Material designation |
Material code |
|
HT20-40 cast iron |
H |
|
Cast aluminium iron |
J |
|
1Cr18Ni9Ti stainless steel |
B |
|
Cr18Ni12Mo2Ti stainless steel |
M |
Model designation example: 32WB-30
- 32: Pump inlet diameter, in millimetres.
- WB: Vortex-pump series designation.
- 30: Design-point head, in metres.
Product Features
Multiple material options:
Cast iron and corrosion-resistant alloy options are available to suit different liquids.
Two shaft-seal options:
Soft packing or a single mechanical seal can be specified.
Seal configuration by model:
The source states that soft packing is the usual factory configuration, while WB and WM models are supplied with a single mechanical seal by default.
Special seal requests:
Specify any alternative shaft-seal arrangement when placing the order.
Applications
The WB series is used in chemical, petroleum, pharmaceutical, textile-dyeing and paper industries. Typical duties include:
- Process-liquid circulation
- Heat-recovery systems
- Cooling-water transfer
- Cooling and ventilation water supply
- Catering facilities and institutional kitchens
The liquid's compatibility with the selected pump material and seal should be confirmed before use.
Technical Specifications
|
Parameter |
Stated range |
|
Flow rate, Q |
0.36–16.9 m³/h |
|
Head, H |
15–132 m |
|
Liquid temperature |
−20°C to +80°C |
|
Maximum viscosity |
5°E |
|
Solids |
Not permitted, according to the stated operating conditions |
|
Pump type |
Single-stage, cantilever-type vortex pump |
Structural Drawings

Performance Data Tables
|
Model |
Flow rate, Q |
Head, H (m) |
Speed, n (r/min) |
Motor power |
Efficiency (%) |
Permissible suction lift (m) |
Impeller diameter, D (mm) |
|
(m3/h) |
N (kW) |
||||||
|
20WB-20 |
0.36 |
28 |
2900 |
0.75 |
14 |
7 |
65 |
|
0.72 |
20 |
22 |
6.5 |
||||
|
0.9 |
15 |
21 |
6 |
||||
|
25WB-25 |
0.79 |
40 |
0.75 |
17 |
6.5 |
75 |
|
|
1.44 |
25 |
26 |
6 |
||||
|
1.8 |
18 |
25 |
5.5 |
||||
|
32WB-30 |
1.73 |
52 |
1.5 |
23 |
6.5 |
85 |
|
|
2.88 |
30 |
32 |
6 |
||||
|
3.6 |
20 |
31 |
5.5 |
||||
|
40WB-40 |
3.6 |
60 |
3 4 |
25 |
6 |
95 |
|
|
5.4 |
40 |
34 |
5 |
||||
|
6.48 |
26 |
34 |
4 |
||||
|
50WB-45 |
6.12 |
66 |
5.5 |
26 |
5 |
105 |
|
|
9 |
45 |
36 |
4 |
||||
|
10.8 |
28 |
35 |
3 |
||||
|
65WB-50 |
10.1 |
84 |
7.5 11 |
29 |
4.5 |
110 |
|
|
14.4 |
50 |
39 |
3.5 |
||||
|
16.9 |
30 |
37 |
2.5 |
||||
|
20WB-65 |
0.36 |
80 |
2.2 |
7 |
6.5 |
105 |
|
|
0.72 |
65 |
15 |
6 |
||||
|
0.9 |
50 |
15 |
5.5 |
||||
|
25WB-70 |
0.792 |
110 |
2.2 |
13 |
6 |
115 |
|
|
1.44 |
70 |
22 |
5.5 |
||||
|
1.8 |
52 |
23 |
5 |
||||
|
32WB-75 |
1.73 |
115 |
3 4 |
23 |
5.5 |
115 |
|
|
2.88 |
75 |
30 |
5 |
||||
|
3.6 |
53 |
30 |
4.5 |
||||
|
40WB-90 |
3.6 |
132 |
7.5 |
23 |
4.5 |
125 |
|
|
5.4 |
90 |
33 |
3.5 |
||||
|
6.48 |
63 |
33 |
2.5 |
If you cannot find the required specifications or model in our product range, please contact us at any time. Our technical specialists will provide prompt model selection assistance and a customized technical solution.
Hot Tags: wb stainless-steel vortex pump, China wb stainless-steel vortex pump manufacturers, factory


