KCB Gear Oil Pump

KCB Gear Oil Pump

The KCB series is a horizontal external-gear pump. Its main components include the casing, driving and driven gears, front and rear covers, shafts, bearings, safety valve and shaft seal.
As the meshing gears rotate inside the casing, liquid is carried in the spaces between the gear teeth and the casing from the suction side to the discharge side, providing continuous transfer.
Send Inquiry
Description

Product Overview

 

The KCB series is a horizontal external-gear pump. Its main components include the casing, driving and driven gears, front and rear covers, shafts, bearings, safety valve and shaft seal.

As the meshing gears rotate inside the casing, liquid is carried in the spaces between the gear teeth and the casing from the suction side to the discharge side, providing continuous transfer.

The pump is intended for non-corrosive, particle-free oils and similar lubricating liquids. The stated operating limits are a liquid temperature of up to 200°C and a viscosity range of 5–1,500 cSt. A built-in safety valve is generally provided. If discharge pressure exceeds its setting, the valve opens to return some liquid from the discharge side to the suction side, helping protect the pump and piping from overpressure.

Model designation example: KCB-18.3

  • K: Indicates a pump fitted with a safety valve, according to the supplied model-code explanation.
  • CB: Gear-pump series designation.
  • 18.3: Rated flow, in L/min.

Other designations, such as KCB-55 and KCB-83.3, follow the same convention as stated in the source.

 

Product Features

 

1. Steady flow with low pulsation

Precision-manufactured gears and close gear-to-casing clearances support stable delivery with relatively low pressure pulsation.

2. Self-priming capability

The pump is stated to have a self-priming height of up to 5 m. The pump casing should contain some liquid before startup. A foot valve is generally not required, subject to the suction arrangement and the manufacturer's instructions.

3. Simple, compact construction

The pump has a relatively simple construction with few main components, making disassembly, assembly and routine maintenance straightforward.

4. Rigid gear-and-shaft design

The gears and shafts are typically designed as an integrated or rigid assembly, providing mechanical strength and stiffness for the intended operating pressures.

5. Limited dry-running tolerance

The source states that the pump can tolerate short periods of operation with a small amount of residual liquid. Since the pumped liquid normally lubricates the moving parts, dry running should be avoided unless the manufacturer explicitly permits it.

6. Built-in safety valve

A safety valve in the pump casing opens when discharge pressure exceeds its setting, returning liquid to the suction side to help protect the pump and piping system.

7. Multiple drive arrangements

The pump can be driven through a flexible coupling, belt drive or variable-frequency drive (VFD). An explosion-protected motor can be specified for suitable hazardous-area applications.

8. Direction of rotation

The supplied material states that the pump can be operated in reverse to transfer liquid in the opposite direction or assist with line cleaning. Reverse operation is not necessarily suitable for every model, particularly where the pump has an internal safety valve. Confirm bidirectional operation and the permitted rotation direction with the manufacturer.

 

Applications

 

The KCB series is used to transfer oils and other lubricating liquids in industries such as:

  • Petroleum and chemicals: Crude oil, heavy oil, diesel, kerosene, gasoline and compatible liquid chemical feedstocks.
  • Oil and fat processing: Vegetable and animal oils, fatty acids and glycerin.
  • Paints and inks: Paint, coatings, inks and resin solutions, where viscosity and chemical compatibility are suitable.
  • Food processing: Edible oils, salad oils and shortening, subject to hygienic-material and certification requirements.
  • Lubrication systems: Oil-supply systems for machinery and lubrication circuits for large gearboxes.
  • Fuel systems: Boiler-house fuel supply, power-plant ignition systems and marine fuel transfer.
  • Marine service: Fuel-oil, lubricating-oil and cargo-oil transfer, subject to vessel and service requirements.
  • Power generation: Fuel-oil supply and transformer-oil transfer.
  • Hydraulic systems: Hydraulic-oil transfer and auxiliary supply to hydraulic power units.
  • Other applications: Asphalt transfer in road construction and oil transfer in building-materials production.

 

Technical Specifications

 

1. Operating Principle

The KCB is a rotary positive-displacement external-gear pump. The motor drives the driving gear, which turns the driven gear in the opposite direction.

On the suction side, the gear teeth move out of mesh and the volume between the teeth increases, creating a low-pressure region into which liquid flows. On the discharge side, the teeth re-engage and the spaces between them decrease, forcing liquid into the discharge line. Continuous gear rotation provides steady transfer.

 

2. Construction

The pump is a horizontal external-gear design comprising the casing, driving and driven gears, front and rear covers, shafts, bearings, safety valve and shaft seal. The suction and discharge connections can be configured to suit the piping arrangement.

 

3. Shaft-Seal Options

Seal selection depends on the liquid and operating conditions:

  • Packing seal: Simple construction and convenient maintenance for general service.
  • Single mechanical seal: For suitable clean-oil applications requiring more reliable containment.
  • Double mechanical seal: An option for higher-temperature service or applications with stricter leakage-control requirements.

 

4. Safety Valve

The casing contains a differential-type safety valve. When discharge pressure exceeds its setpoint, the valve opens and returns some liquid from the discharge side to the suction side. This helps limit pressure rise and protect the pump and piping.

The source states that the valve is set before shipment and normally does not need adjustment by the user. A built-in safety valve is not a substitute for a correctly designed system pressure-relief device, and the pump should not be operated against a closed discharge valve.

 

5. Materials

Component

Material options

Notes

Casing / cover

HT200 cast iron, cast steel, 304 / 316 stainless steel

Select according to the fluid and operating conditions

Gears / shafts

45# carbon steel, 40Cr alloy steel, 304 / 316 stainless steel

45# steel is stated as the standard configuration

Bearings

Copper-alloy plain bearings or rolling bearings

Selected according to model and service

Shaft seal

Packing or mechanical seal

Selected according to the application

 

6. Drive and Rotation

The pump is typically driven directly by an electric motor through a flexible coupling. Belt drive and VFD arrangements are also available. Viewed from the motor end toward the pump, the stated standard rotation is clockwise. Changing the motor wiring may reverse motor rotation, but the pump's suitability for reverse operation must be confirmed for the specific model.

 

7. Stated Operating Range

Parameter

Stated range

Flow rate, Q

1.1–150 m³/h across the series

Working pressure

0.33–2.5 MPa, depending on model

Viscosity

5–1,500 cSt; higher viscosity may be possible at reduced speed, subject to confirmation

Medium temperature

Up to 200°C; special configurations may allow higher temperatures

Speed, n

700–1,450 r/min; 4-pole motor stated as standard

Self-priming height

Up to 5 m, as stated

Motor power

0.75–55 kW, selected for the duty

 

Structural Drawings

 

product-1108-739

 

Performance Data Tables

 

Model

Flow rate (m³/h)

Discharge pressure (MPa)

Speed (r/min)

Motor power (kW)

Suction port (mm)

Discharge port (mm)

Maximum viscosity (cSt)

Temperature range (°C)

KCB-18.3

1.1

1.45

1400

1.5

G3/4″

G3/4″

1500

≤80/≤200

KCB-33.3

2

1.45

1420

2.2

G3/4″

G3/4″

1500

≤80/≤200

KCB-55

3.3

0.33

1400

1.5

G1″

G1″

1500

≤80/≤200

KCB-83.3

5

0.33

1420

2.2

G1½″

G1½″

1500

≤80/≤200

KCB-135

8

0.33

1440

4

G2″

G2″

1500

≤80/≤200

KCB-200

12

0.33

1440

5.5

G2½″

G2½″

1500

≤80/≤200

KCB-300

18

0.36

1440

5.5/7.5

DN70

DN70

1500

≤80/≤200

KCB-483.3

29

0.36

1440

7.5/11

DN70

DN70

1500

≤80/≤200

KCB-633

38

0.28

1470

11

DN100

DN100

1500

≤80/≤200

KCB-960

58

0.28

1470

18.5

DN100

DN100

1500

≤80/≤200

KCB-1200

72

0.6

740

22

DN125

DN125

1500

≤80/≤200

KCB-1600

96

0.6

740

30

DN150

DN150

1500

≤80/≤200

KCB-1800

108

0.6

740

30/37

DN150

DN150

1500

≤80/≤200

KCB-2500

150

0.6

980

45

DN200

DN200

1500

≤80/≤200

KCB-2850

171

0.6

740

55

DN200

DN200

1500

≤80/≤200

KCB-3800

228

0.6

980

75

DN250

DN250

1500

≤80/≤200

If you cannot find the required specifications or model in our product range, please contact us at any time. Our technical specialists will provide prompt model selection assistance and a customized technical solution.

Hot Tags: kcb gear oil pump, China kcb gear oil pump manufacturers, factory

Send Inquiry