Product Overview
The ZA pump is a horizontal, single-stage, single-suction, overhung centrifugal pump designed for petroleum and petrochemical service. The series is intended for corrosive, high-temperature and high-pressure applications. It is designed and manufactured with reference to API 610 (10th or 11th edition) and VDMA 24297 for light-, medium- and heavy-duty service, and also aligns with relevant standards including DIN 24256, ISO 2858 and GB 5662-85.
The pump has axial suction, radial discharge and a back-pull-out design. For maintenance, the bearing bracket and rotating assembly can be withdrawn from the casing without removing the suction and discharge piping.
The ZA series is a mature product developed using technology from Swiss pump manufacturer Sulzer. Its hydraulic design has been selected and refined, including through CFD analysis, to provide efficient operation, stable performance and a broad application range. In this pump family, ZA has a foot-mounted casing and is classified as API 610 OH1; ZE has a centerline-supported casing and is classified as API 610 OH2.
Product Features
1. Designed to international standards
The pump is designed and manufactured with reference to API 610 and VDMA 24297. Standard piping arrangements follow API practices, and the suction and discharge flanges have the same pressure rating. These features are intended to meet the reliability and safety requirements of the petroleum and petrochemical industries.
2. Optimized hydraulic design
The hydraulic model has been selected and refined from established designs. The enlarged impeller inlet helps reduce inlet velocity, improving cavitation performance and potentially extending service life.
Closed, semi-open and open impellers are available to suit different media and operating conditions.
3. Hydraulic balancing for reliable operation
Pumps with discharge sizes of 80 mm and larger use a double-volute casing to balance radial forces and help protect the bearings and shaft seal.
Axial thrust is balanced hydraulically using front and rear wear rings and balance holes. The thrust bearing carries the residual unbalanced load. Depending on the duty, paired cylindrical-roller or tapered-roller bearings can be used.
4. Shaft-seal options and API 682 arrangements
Available sealing arrangements include packing, single or double mechanical seals, and cartridge mechanical seals. Cooling, flushing or seal-fluid systems can be provided. Mechanical-seal piping plans can be selected with reference to API 682, based on the service and the user's cooling and flushing requirements.
The stuffing box can be supplied with cooling or heating connections.
5. Modular bearing bracket for a wide temperature range
The bearing bracket is available with cooling fins for natural air cooling, a fan for forced-air cooling, or a water-cooling chamber.
For medium temperatures below 250°C, bracket cooling is generally not required according to the supplied information. For temperatures above 250°C and up to 450°C, forced-air or water cooling is available. Oil rings splash-lubricate the bearings from the oil reservoir; on water-cooled configurations, the water-cooled chamber helps control oil temperature.
6. Broad materials range
Wetted-part materials include carbon steel, 304 and 316L stainless steel, 904 stainless steel, Hastelloy, duplex stainless steel and titanium alloys. Material selection can be tailored to acids, alkalis, salt solutions and organic compounds at different concentrations and temperatures.
7. Convenient maintenance and lower life-cycle costs
Typical wear parts include wear rings, shaft sleeves and mechanical seals. These can be replaced while retaining major components such as the casing and shaft, helping reduce repair costs.
The intermediate section can be made from different materials and may include a water-cooling chamber to limit heat transfer from the pumped medium to the bearing bracket.
Applications
The ZA pump is designed for clean or particle-bearing liquids, low- or high-temperature liquids, and neutral or corrosive media. It is particularly suited to liquid petroleum products and acid, alkali or salt solutions across a range of temperatures and concentrations.
Typical applications include:
- Oil refining and petrochemicals: Petroleum refining, product purification, pipeline transfer and process-fluid handling in petrochemical plants.
- Chemical processing: Acids, alkalis, salt solutions and organic compounds, as well as chemical and coal-processing plants.
- Cryogenic service: Transfer of low-temperature liquids.
- Power generation: Plant water supply, condensate recovery and cooling-water circulation.
- Environmental protection and water treatment: Water-treatment plants, seawater desalination, environmental projects and wastewater-treatment systems.
- Metallurgy and paper production: Pulp and paper, sugar production and metallurgical process-fluid transfer.
- Marine and offshore industries: Shipboard systems and offshore process-fluid transfer.
- Heating and air conditioning: Medium- and large-scale heating and air-conditioning systems.
Technical Specifications
Design Standards
- API 610 (10th or 11th edition)
- VDMA 24297 (light-, medium- and heavy-duty)
- DIN 24256
- ISO 2858
- GB 5662-85
2. Pump Configuration
- ZA: API 610 OH1 arrangement; horizontal, single-stage, single-suction, overhung pump with a foot-mounted, radially split volute casing.
- ZE: API 610 OH2 arrangement; centerline-supported configuration.
3. Operating Conditions
Rated operating pressure:
- ZA: up to 2.5 MPa
- ZE: up to 5.0 MPa
- Some extended models: up to 4.6 MPa, as stated in the source
Medium temperature:
- ZA: −80°C to +200°C
- ZE, centerline-supported: −80°C to +450°C
- A special-service range of −45°C to +420°C is also stated
- Maximum ambient temperature: 40°C
- Direction of rotation: Clockwise when viewed from the motor end toward the pump
- Suitable media: Clean or particle-bearing liquids; low- or high-temperature liquids; neutral or corrosive liquids, including acids, alkalis, salt solutions and liquid petroleum products
4. General Performance Range
- Flow rate (Q): 2–2,600 m³/h across the basic series and trimmed-impeller models
- Head (H): 4–300 m; up to 603 m for some models
- Speed (n): 1,450 / 2,900 r/min; direct motor drive or variable-frequency control
Operating pressure:
- ZA: ≤2.5 MPa
- ZE: ≤5.0 MPa
- Some models are also listed at up to 4.6 MPa
- Medium temperature: −80°C to +450°C across the series; ZA up to 200°C and centerline-supported ZE up to 450°C
- Nominal size range: 25–400 mm, covering inlet and outlet diameters
- Motor power: 1.1–315 kW; up to 1,250 kW for extended models
- Motor protection rating: IP54 / IP55 / IP65, as specified
- Motor insulation class: F
Structural Drawings

Performance Data Tables
|
Model |
Speed (r/min) |
Flow rate Q (m³/h) |
Head H (m) |
Efficiency η (%) |
Shaft power (kW) |
Motor power (kW) |
NPSHr (m) |
Impeller diameter (mm) |
|
ZA25-200 |
2950 |
11.5 |
49 |
42 |
3.8 |
5.5 |
1.6 |
209 |
|
1475 |
5.8 |
12 |
38 |
0.55 |
1.1 |
1.2 |
209 |
|
|
ZA40-160 |
2950 |
28 |
33 |
62 |
3 |
5.5 |
3 |
169 |
|
1475 |
14 |
8 |
59 |
0.53 |
1.1 |
0.8 |
169 |
|
|
ZA40-200 |
2950 |
29 |
53 |
58 |
7.5 |
11 |
2.2 |
209 |
|
1475 |
14.5 |
13 |
55 |
1.1 |
1.5 |
0.8 |
209 |
|
|
ZA40-250 |
2950 |
32 |
78 |
53 |
13.5 |
18.5 |
2.2 |
259 |
|
1475 |
16 |
19.5 |
43.5 |
1.8 |
3 |
0.75 |
259 |
|
|
ZA40-315 |
2950 |
42 |
115 |
46 |
30 |
37 |
1.25 |
324 |
|
1475 |
21 |
29 |
42 |
4.5 |
5.5 |
0.5 |
324 |
|
|
ZA50-160 |
2950 |
50 |
34 |
71 |
7 |
11 |
2.4 |
169 |
|
1475 |
25 |
8.4 |
69 |
0.87 |
1.5 |
0.75 |
169 |
|
|
ZA50-200 |
2950 |
62 |
52 |
68 |
13.5 |
18.5 |
2.6 |
209 |
|
1475 |
31 |
13 |
65.5 |
1.7 |
3 |
0.75 |
209 |
|
|
ZA50-250 |
2950 |
70 |
82 |
65 |
24 |
30 |
2.4 |
259 |
|
1475 |
35 |
20 |
62.5 |
3.2 |
4 |
0.7 |
259 |
|
|
ZA50-315 |
2950 |
87 |
115 |
56 |
50 |
55 |
2.2 |
324 |
|
1475 |
44 |
28 |
53 |
6.5 |
11 |
0.5 |
324 |
|
|
ZA50-400 |
2950 |
82 |
194 |
48 |
92 |
110 |
2 |
409 |
|
1475 |
41 |
48 |
45 |
12.7 |
15 |
0.5 |
409 |
|
|
ZA80-160 |
2950 |
94 |
32 |
78 |
11 |
15 |
3 |
169 |
|
1475 |
47 |
8 |
72 |
1.5 |
2.2 |
1.4 |
169 |
|
|
ZA80-200 |
2950 |
103 |
54 |
76 |
20 |
30 |
3.2 |
209 |
|
1475 |
51 |
13.5 |
74 |
2.5 |
4 |
0.8 |
209 |
|
|
ZA80-250 |
2950 |
127 |
82 |
74 |
35 |
45 |
4 |
259 |
|
1475 |
64 |
20 |
72 |
5.4 |
7.5 |
1.3 |
259 |
|
|
ZA80-315 |
2950 |
141 |
127 |
69 |
76 |
90 |
4 |
324 |
|
1475 |
70 |
33 |
66.5 |
10 |
15 |
1 |
324 |
|
|
ZA80-400 |
2950 |
171 |
187 |
61 |
142 |
160 |
3.5 |
409 |
|
1475 |
85 |
46 |
58 |
19 |
22 |
0.8 |
409 |
|
|
ZA100-160 |
2950 |
162 |
32 |
82 |
17.5 |
22 |
4.5 |
169 |
|
1475 |
81 |
8 |
78 |
2.3 |
3 |
2 |
169 |
|
|
ZA100-200 |
2950 |
175 |
50 |
80 |
29.8 |
37 |
3 |
209 |
|
1475 |
88 |
12.5 |
78 |
3.9 |
5.5 |
1.5 |
209 |
|
|
ZA100-250 |
2950 |
230 |
65 |
81 |
62 |
75 |
4 |
259 |
|
1475 |
115 |
16 |
76 |
6.7 |
11 |
1.8 |
259 |
|
|
ZA100-315 |
2950 |
280 |
125 |
75 |
135 |
160 |
4.5 |
324 |
|
1475 |
140 |
32 |
72 |
18 |
22 |
2 |
324 |
|
|
ZA100-400 |
2950 |
280 |
195 |
72 |
206.7 |
250 |
3.2 |
400 |
|
1475 |
140 |
48 |
68 |
27.6 |
37 |
1.8 |
400 |
|
|
ZA100-450 |
2950 |
330 |
252 |
70 |
323.7 |
400 |
5.7 |
450 |
|
ZA150-200 |
2950 |
310 |
46 |
81 |
48 |
55 |
6 |
209 |
|
1475 |
155 |
12 |
78 |
6.5 |
11 |
2.5 |
209 |
|
|
ZA150-250 |
2950 |
380 |
80 |
80 |
105 |
132 |
5.5 |
259 |
|
1475 |
190 |
20 |
78 |
14.2 |
18.5 |
2.5 |
259 |
|
|
ZA150-315 |
2950 |
440 |
125 |
79 |
195 |
220 |
5 |
324 |
|
1475 |
220 |
32 |
76 |
26 |
37 |
2.5 |
324 |
|
|
ZA150-400 |
2950 |
500 |
195 |
78 |
350 |
400 |
5.5 |
400 |
|
1475 |
250 |
48 |
76 |
44 |
55 |
2.8 |
400 |
|
|
ZA150-560 |
1450 |
400 |
85 |
80 |
118 |
160 |
3.5 |
560 |
|
ZA200-250 |
1450 |
500 |
20 |
80 |
34.5 |
45 |
4 |
259 |
|
ZA200-315 |
1450 |
580 |
32 |
82 |
62 |
75 |
4 |
324 |
|
ZA200-400 |
2950 |
800 |
195 |
82 |
518.4 |
630 |
12.5 |
400 |
|
1450 |
600 |
50 |
82 |
100 |
132 |
3.5 |
400 |
|
|
ZA200-450 |
2950 |
900 |
250 |
80 |
766.4 |
900 |
11.5 |
450 |
|
ZA250-315 |
1450 |
800 |
32 |
84 |
83.5 |
110 |
5 |
324 |
|
ZA250-400 |
1450 |
850 |
50 |
84 |
138.5 |
160 |
4.5 |
400 |
|
ZA250-500 |
1450 |
1000 |
80 |
85 |
260 |
315 |
4.8 |
500 |
|
ZA250-560 |
1450 |
1200 |
100 |
85 |
385 |
450 |
5 |
560 |
|
ZA300-400 |
1450 |
1300 |
50 |
85 |
208 |
250 |
5.5 |
400 |
|
ZA300-450 |
1450 |
1500 |
80 |
86 |
380 |
450 |
5.5 |
450 |
|
ZA300-560 |
1450 |
1800 |
100 |
86 |
575 |
630 |
6 |
560 |
|
ZA350-450 |
1450 |
1900 |
80 |
87 |
475 |
560 |
6 |
450 |
|
ZA350-500 |
1450 |
2100 |
90 |
87 |
590 |
710 |
6.5 |
500 |
|
ZA350-630 |
1450 |
2200 |
125 |
86 |
870 |
1000 |
6.5 |
630 |
|
ZA400-500 |
1450 |
2400 |
80 |
88 |
595 |
710 |
7 |
500 |
|
ZA400-560 |
1450 |
2600 |
100 |
88 |
810 |
1000 |
7 |
560 |
|
ZA400-630 |
1450 |
2600 |
125 |
87 |
1020 |
1250 |
7.5 |
630 |
If you cannot find the required specifications or model in our product range, please contact us at any time. Our technical specialists will provide prompt model selection assistance and a customized technical solution.
Hot Tags: za petroleum and petrochemical process pump, China za petroleum and petrochemical process pump manufacturers, factory


