Product Overview
The ATY submerged sulfur gear pump is a vertical, submerged, external-gear positive-displacement rotary pump, also referred to as a submerged gear pump or molten sulfur pump. It has a heating jacket and is designed with reference to Japanese submerged gear-pump technology. The pump's main components include the casing, driving and driven gears, shaft, heating jacket, intermediate pipe, discharge pipe, mounting plate and motor.
The submerged pump section operates beneath the molten sulfur surface in the storage tank. As the meshing gears rotate inside the pump casing, they carry liquid from the suction side to the discharge side for continuous transfer.
Compared with centrifugal sulfur pumps, the gear pump is intended for small-flow, high-viscosity and metering duties. Its flow rate varies approximately with rotational speed, so a variable-frequency drive can be used for flow adjustment. The ATY gear pump complements the LHY molten sulfur sump pump: LHY is intended for larger-flow, higher-head duties, while ATY is suited to smaller-flow, higher-viscosity transfer and controlled feeding.
Product Features
1. Heating jacket helps prevent solidification
The pump casing and discharge pipe have heating jackets for steam or heat-transfer oil. The system is designed to keep molten sulfur within its stated operating range of 130–160°C, helping prevent solidification and blockages in the pump or piping.
2. Variable-speed control for metering duties
With a variable-frequency drive, pump speed can be adjusted to regulate flow. This makes the ATY suitable for process duties requiring controlled molten sulfur feed, such as refined-sulfur feeding in sulfuric acid plants.
3. Reversible operation may help clear inlet blockages
The pump can be configured for forward and reverse rotation. The source states that reverse operation can help dislodge deposits from a blocked submerged inlet. Confirm with the manufacturer that the specific pump, motor and piping arrangement are designed for reverse operation.
4. Adjustable clearances
As wear increases the clearance between the gears and casing, delivered flow may fall. An adjustment mechanism can be used to reduce the clearance and recover flow performance, potentially extending the pump's useful service life.
5. Steady, low-pulsation delivery
As an external-gear positive-displacement pump, the ATY is designed to provide continuous delivery with low flow pulsation. Its precision-machined gear set is intended to provide stable transfer for processes requiring consistent flow.
6. Low-speed operation
The stated speed is approximately 500 r/min for larger sizes and up to 1,450 r/min for smaller sizes. Low-speed operation is intended to reduce gear wear and support long service life.
7. Material options
The pump casing can be made from cast iron, ductile iron, 304 stainless steel or 316 stainless steel, depending on the medium's temperature and corrosiveness.
8. Submerged construction without a wetted dynamic shaft seal
The working section is submerged, and there is no rotary dynamic seal between the submerged and above-liquid sections. The above-liquid shaft exit uses packing or a mechanical seal, as configured, to limit vapor escape.
Applications
The pump is designed for heated transfer of molten sulfur and other viscous media. Typical applications include:
- Sulfuric acid production: Molten sulfur transfer and controlled feeding, including refined-sulfur feed and truck-loading duties.
- Petrochemical processing: Heated transfer of liquid paraffin, coal tar, asphalt and other oils.
- Chemical fiber and viscose production: Transfer of viscose, polymer melts and other viscous liquids.
- Coal chemical processing: Transfer of high-temperature coal tar.
- Carbon and electrode materials: Transfer and metering of hot liquid asphalt.
The stated suitable media include molten sulfur, liquid asphalt, liquid paraffin and high-temperature coal tar, subject to appropriate material selection and heating.
Technical Specifications
1. Design and Technical Basis
The pump is described as being designed and manufactured with reference to Japanese submerged gear-pump technology. Core wetted-part dimensions and performance curves can be customized to order. The supplied information does not identify a specific governing design standard; confirm the applicable standard for the selected model.
2. Operating Principle
The ATY is an external-gear positive-displacement pump. A motor drives the driving gear, which turns the driven gear in the opposite direction.
Suction side: As the teeth move out of mesh, the volume between the teeth and casing increases, creating a low-pressure region. Liquid is drawn into the pump by tank pressure or atmospheric pressure.
Discharge side: As the teeth re-enter mesh, the volume decreases and the liquid is displaced into the discharge pipe.
The continuous rotation of the gear set conveys liquid steadily into the process piping.
3. Construction
The pump is a vertical submerged external-gear pump. The motor is mounted above the storage tank on a baseplate and drives a long shaft through a coupling. The shaft connects to the driving gear inside the pump casing.
The casing, gear set and suction inlet are submerged below the molten sulfur surface. The discharge pipe rises from the pump casing to above the baseplate. The standard submergence depth is stated as ≤2 m, with longer arrangements available to order.
4. Drive and Rotation
The motor is directly coupled to the pump. Viewed downward from the motor end, the stated normal direction of rotation is clockwise. A variable-frequency drive can provide stepless speed control; flow rate is stated to vary approximately in proportion to speed.
5. Heating System
The pump casing and discharge pipe have heating jackets through which steam or heat-transfer oil circulates. Heating temperature should be selected for the medium to maintain suitable flow properties. Jacket connections can be arranged to suit site conditions.
6. Sealing
The submerged section has no rotary dynamic seal. At the above-liquid shaft exit, the pump uses packing or a mechanical seal, depending on configuration, to limit the release of vapor.
7. Wetted-Part Materials
- Standard molten sulfur service: Cast iron or ductile iron
- Moderately corrosive service: 304 stainless steel
- More corrosive service: 316 stainless steel
Confirm material compatibility against the actual medium, temperature and operating conditions.
8. Operating Conditions
- Flow rate (Q): 0.1–60 m³/h across the series
- Maximum pressure: 16 bar (1.6 MPa), stated standard design pressure
- Medium viscosity: 0.1–10,000 cP; lower speed may allow higher-viscosity service
- Medium temperature: −30°C to 410°C stated as the overall range; molten sulfur service is recommended at 130–160°C
- Submergence depth: ≤2 m standard; extensions can be customized
- Speed: 500–1,450 r/min; variable-frequency control available
- Motor power: 0.55–22 kW, selected according to the duty
9. Installation Requirements
Install the pump vertically on the tank's top flange using the mounting plate, then connect the discharge piping. Ensure the suction inlet is fully submerged before startup; do not run the pump if the liquid level is below the pump casing.
The mounting foundation must be sufficiently rigid and stable to avoid vibration that could affect gear meshing. Before starting, check that the heating system is operating and that the medium has reached a suitable pumping temperature.
10. Operating Precautions
a. Ensure the pump is filled with liquid before startup. Do not run it dry for an extended period, as dry gear contact can cause damage.
b. Put the heating system into operation before starting the pump. After shutdown, maintain heating as needed or drain the pump if ambient conditions could cause the medium to solidify or freeze.
c. Reverse operation is described as a means of clearing inlet deposits. Use this only if the specific pump and drive arrangement are approved for reverse operation.
d. If flow falls noticeably because of wear, use the clearance-adjustment mechanism as specified by the manufacturer.
e. For corrosive or toxic media, provide the medium's name, temperature, concentration, density and viscosity when ordering so appropriate materials and safety provisions can be selected.
f. In hazardous areas, use a motor with the required explosion-protection rating.
Structural Drawings

Performance Data Tables
|
Model |
Connection dimensions (mm) |
Maximum flow (m³/h) |
Maximum pressure (bar) |
Viscosity range (cP) |
Maximum speed (r/min) |
Motor power (kW) |
Maximum temperature (°C) |
Submergence depth (m) |
|
ATY-01 |
10 |
0.4 |
16 |
0.1~3000 |
1450 |
0.55 |
410 |
≤2 |
|
ATY-02 |
10 |
0.8 |
16 |
0.1~3000 |
1450 |
0.55 |
410 |
≤2 |
|
ATY-04 |
15 |
1.2 |
16 |
0.1~8000 |
1450 |
0.75 |
410 |
≤2 |
|
ATY-08 |
20 |
2.5 |
16 |
0.1~10000 |
1450 |
1.1 |
410 |
≤2 |
|
ATY-10 |
25 |
3.2 |
16 |
0.1~10000 |
1450 |
2.2 |
410 |
≤2 |
|
ATY-12 |
32 |
4.9 |
16 |
0.1~10000 |
960 |
3 |
410 |
≤2 |
|
ATY-14 |
40 |
8.5 |
16 |
0.1~10000 |
960 |
5.5 |
410 |
≤2 |
|
ATY-16 |
50 |
16.5 |
16 |
0.1~10000 |
960 |
7.5 |
410 |
≤2 |
|
ATY-18 |
80 |
40 |
16 |
0.1~10000 |
500 |
15 |
410 |
≤2 |
|
ATY-20 |
100 |
60 |
16 |
0.1~10000 |
500 |
22 |
410 |
≤2 |
If you cannot find the required specifications or model in our product range, please contact us at any time. Our technical specialists will provide prompt model selection assistance and a customized technical solution.
Hot Tags: aty vertical submerged molten sulfur gear pump, China aty vertical submerged molten sulfur gear pump manufacturers, factory


