Product Overview
The WQ fixed-installation submersible sewage pump is a WQ-series pump installed using an automatic coupling system. The pump and submersible motor are directly coupled as one unit and operate underwater. The main components include the motor, pump body, impeller, mechanical seal, power cable, automatic coupling assembly and control cabinet.
Developed using technology based on overseas designs, the WQ series uses a dual-channel or large-passage anti-clogging impeller. Its wide flow passages allow it to handle liquids containing solids, long fibrous matter and other contaminants. In fixed installations, the automatic coupling connects the pump to the discharge pipework. For maintenance, the pump can be lifted to the surface along guide rails without entering the wet well.
Related products on the same technical platform include the JYWQ automatic mixing submersible sewage pump, WQX engineering submersible pump and QX engineering submersible pump. The JYWQ adds a mixing device below the pump to agitate settled sludge before pumping. The WQX/QX types are intended for engineering duties involving clean water or lightly contaminated water.
Across the stated product range, flow rates cover 5–6,000 m³/h, heads cover 5–45 m, and nominal outlet sizes cover 25–600 mm.
Model designation examples:
- WQ100-15-7.5: WQ denotes a submersible sewage pump; 100 is the rated flow in m³/h; 15 is the rated head in metres; 7.5 is the motor rated power in kW.
- JYWQ50-15-1200-4: JY denotes automatic mixing; WQ denotes a submersible sewage pump; 50 is the outlet diameter in mm; 15 is the rated head in metres; 1200 is stated to represent a rated flow of 12 m³/h (1.2 × 10); 4 is the motor power in kW.
Product Features
1. Anti-clogging impeller with strong solids-handling capability
The pump uses a dual-channel or large-passage impeller with wide, unobstructed flow paths. For the WQ type, the stated solids passage is up to 60% of the discharge diameter, and the stated fibre length capacity is up to five times the discharge diameter. This enables the pump to handle wastewater containing large solids and long fibres.
The JYWQ version adds shredding and automatic mixing functions.
2. Integrated underwater operation
The pump and submersible motor are directly coupled and operate underwater. A separate pump room is not required, helping reduce installation space and civil-work costs.
For fixed automatic-coupling installation, the pump slides down the guide rails and locks automatically to the discharge connection. For maintenance, it can be lifted back up the rails without requiring personnel to enter the wet well.
3. Double mechanical seal
The pump uses a double mechanical seal. The oil chamber is filled with mechanical oil to lubricate and cool the seals. The motor-side and pump-side seals provide two barriers against leakage and help protect the motor.
4. Motor protection
The submersible motor can be equipped with thermal protection, overload protection and moisture or leakage sensors. These devices can trigger a shutdown in response to excessive motor temperature, overload or water ingress.
The stated motor insulation class is F, and the protection rating is IP68.
5. Water-cooled motor
The motor housing is in direct contact with the surrounding liquid, which carries away heat and supports low-temperature-rise operation.
6. Multiple installation arrangements
Fixed automatic-coupling installation:
The pump connects to the discharge pipe through an automatic coupling. Suitable for permanent pump stations and convenient for maintenance.
Fixed hard-pipe connection:
The pump is connected directly to the discharge pipe by flange or threaded connection.
Portable hose connection:
A quick coupling and flexible hose can be used for temporary drainage or emergency response.
7. Material options
Wetted parts can be specified in HT200 cast iron, 304, 316 or 316L stainless steel, or duplex stainless steel, depending on the wastewater's corrosiveness and solids content.
8. Convenient automatic-coupling maintenance
The automatic coupling assembly comprises guide rails, a coupling base, a pump-side coupling interface and lifting equipment. The pump can be raised to the surface along the guide rails without entering the wet well, helping simplify maintenance and reduce service costs.
9. Optional automatic control cabinet
A control cabinet with level control can be supplied. It can start and stop the pump in response to liquid level, support unattended operation, and provide multi-pump sequencing or duty rotation.
Applications
The WQ fixed-installation submersible sewage pump is used to convey wastewater containing solids and fibrous contaminants in applications such as:
Municipal wastewater: Inlet pumping stations at wastewater-treatment plants, municipal sewage stations, stormwater pumping stations, intermediate lift stations and river pollution-control systems.
Industrial wastewater: Wastewater collection and discharge in chemical, textile-dyeing, paper, electroplating and food-processing plants.
Building drainage: Construction-site dewatering, basement drainage and wastewater lift stations for large buildings.
Residential wastewater: Sewage from septic tanks and collection systems in residential communities.
Livestock and aquaculture: Manure wastewater and slurry transfer from farms and biogas facilities.
Mining and tunnelling: Mine-water discharge and tunnel-construction wastewater removal.
Power plants: Drainage from ash ponds and wastewater discharge from flue-gas desulfurization systems.
Water conservancy and drainage: Stormwater discharge from low-lying areas, agricultural drainage and emergency dewatering.
Technical Specifications
1. Design Standards
The supplied material states that the pump is designed and manufactured to JB/T 8857-2011, Centrifugal Submersible Sewage Pumps. The motor is stated to comply with GB/T 2818, Submersible Asynchronous Motors for Wells. Hydraulic performance testing is referenced to ISO 9906.
2. Construction and Operating Principle
The pump and submersible motor form an integrated unit, with the motor above the pump body. The suction inlet faces downward, while the discharge outlet is horizontal or vertically upward.
In fixed installations, the pump slides down the guide rails until its outlet flange automatically locks onto the coupling base installed at the bottom of the wet well.
During operation, the motor drives the impeller. Wastewater enters through the lower suction inlet, is pressurized by the impeller, and flows through the pump outlet and coupling base into the discharge pipe.
The automatic coupling assembly consists of guide rails, a coupling base, a pump-side coupling interface and lifting equipment. Lowering the pump along the guide rails connects it to the coupling base; lifting it separates the pump from the base without requiring personnel to enter the wet well.
3. Impeller Design
The pump uses a dual-channel or large-passage impeller designed to pass solids and long fibres. The JYWQ type has an additional mixing device below the impeller to agitate settled material during operation and help prevent clogging.
4. Shaft-Seal System
The pump uses a double mechanical seal with an oil-filled chamber for lubrication and cooling. One seal is positioned on the motor side to prevent pumped liquid from entering the motor cavity; the other is on the pump side to prevent liquid from entering the oil chamber.
5. Motor Protection
The submersible motor may include the following protective devices:
Thermal protection: Shuts down the motor if winding temperature exceeds the set limit.
Overload protection: Shuts down the motor if operating current exceeds the rated value.
Moisture/leakage protection: Detects water entering the motor cavity or oil chamber and signals a shutdown.
The stated insulation class is F, and the protection rating is IP68.
6. Wetted-Part Material Selection
|
Material |
Typical stated service |
|
HT200 cast iron |
Neutral wastewater, general municipal sewage and stormwater |
|
304 stainless steel |
General corrosive wastewater and industrial effluent |
|
316 stainless steel |
Moderately corrosive wastewater, including some chloride-bearing media |
|
316L stainless steel |
More corrosive wastewater, including some chloride-bearing media |
|
Duplex stainless steel |
Severe corrosion or demanding service involving abrasive particles |
Material compatibility should be verified against the actual fluid composition, concentration and temperature.
7. Stated Operating Conditions
|
Parameter |
Stated range or limit |
|
Flow rate, Q |
5–6,000 m³/h across the product range |
|
Head, H |
5–45 m for the stated range; some models may be higher |
|
Speed, n |
2,900 / 1,450 / 980 r/min, depending on model |
|
Medium temperature |
≤60°C |
|
Medium density |
≤1,240 kg/m³ |
|
Total impurity content |
≤15% of the medium's total weight |
|
Solids passage |
Particle diameter up to 60% of pump diameter, as stated |
|
Fibre passage |
Fibre length up to five times the pump diameter, as stated |
|
Maximum submergence depth |
≤20 m |
|
Nominal diameter range |
25–600 mm |
|
Motor power |
0.75–200 kW, selected for the duty |
Structural Drawings

Performance Data Tables
|
Model |
Flow rate (m³/h) |
Head (m) |
Speed (r/min) |
Motor power (kW) |
Outlet diameter (mm) |
Efficiency (%) |
Solids passage (mm) |
Approximate weight (kg) |
|
25WQ8-15-1.5 |
8 |
15 |
2900 |
1.5 |
25 |
45 |
8 |
35 |
|
25WQ8-22-2.2 |
8 |
22 |
2900 |
2.2 |
25 |
42 |
8 |
40 |
|
32WQ5-20-2.2 |
5 |
20 |
2900 |
2.2 |
32 |
42 |
10 |
45 |
|
32WQ10-20-2.2 |
10 |
20 |
2900 |
2.2 |
32 |
45 |
10 |
45 |
|
32WQ9-30-3 |
9 |
30 |
2900 |
3 |
32 |
40 |
10 |
55 |
|
40WQ10-20-2.2 |
10 |
20 |
2900 |
2.2 |
40 |
46 |
12 |
55 |
|
40WQ12-15-2.2 |
12 |
15 |
2900 |
2.2 |
40 |
48 |
12 |
55 |
|
40WQ15-30-3 |
15 |
30 |
2900 |
3 |
40 |
50 |
12 |
65 |
|
40WQ20-40-7.5 |
20 |
40 |
2900 |
7.5 |
40 |
48 |
12 |
90 |
|
50WQ10-20-2.2 |
10 |
20 |
2900 |
2.2 |
50 |
48 |
15 |
60 |
|
50WQ15-25-3 |
15 |
25 |
2900 |
3 |
50 |
50 |
15 |
65 |
|
50WQ15-30-4 |
15 |
30 |
2900 |
4 |
50 |
48 |
15 |
75 |
|
50WQ20-15-3 |
20 |
15 |
2900 |
3 |
50 |
52 |
15 |
65 |
|
50WQ20-30-5.5 |
20 |
30 |
2900 |
5.5 |
50 |
50 |
15 |
90 |
|
50WQ20-35-7.5 |
20 |
35 |
2900 |
7.5 |
50 |
48 |
15 |
100 |
|
50WQ25-40-7.5 |
25 |
40 |
2900 |
7.5 |
50 |
48 |
15 |
110 |
|
50WQ25-50-11 |
25 |
50 |
2900 |
11 |
50 |
45 |
15 |
130 |
|
50WQ40-25-7.5 |
40 |
25 |
2900 |
7.5 |
50 |
52 |
15 |
100 |
|
65WQ20-15-3 |
20 |
15 |
2900 |
3 |
65 |
52 |
20 |
75 |
|
65WQ25-18-4 |
25 |
18 |
2900 |
4 |
65 |
54 |
20 |
85 |
|
65WQ25-30-5.5 |
25 |
30 |
2900 |
5.5 |
65 |
52 |
20 |
100 |
|
65WQ25-40-7.5 |
25 |
40 |
2900 |
7.5 |
65 |
50 |
20 |
110 |
|
65WQ25-50-11 |
25 |
50 |
2900 |
11 |
65 |
48 |
20 |
140 |
|
65WQ30-40-11 |
30 |
40 |
2900 |
11 |
65 |
52 |
20 |
140 |
|
65WQ40-25-7.5 |
40 |
25 |
2900 |
7.5 |
65 |
55 |
20 |
110 |
|
65WQ50-30-11 |
50 |
30 |
2900 |
11 |
65 |
54 |
20 |
140 |
|
80WQ30-22-5.5 |
30 |
22 |
2900 |
5.5 |
80 |
55 |
25 |
110 |
|
80WQ30-30-7.5 |
30 |
30 |
2900 |
7.5 |
80 |
54 |
25 |
120 |
|
80WQ40-16-4 |
40 |
16 |
2900 |
4 |
80 |
56 |
25 |
100 |
|
80WQ40-25-7.5 |
40 |
25 |
2900 |
7.5 |
80 |
55 |
25 |
120 |
|
80WQ40-32-11 |
40 |
32 |
2900 |
11 |
80 |
54 |
25 |
140 |
|
80WQ50-30-11 |
50 |
30 |
2900 |
11 |
80 |
56 |
25 |
140 |
|
80WQ50-40-15 |
50 |
40 |
2900 |
15 |
80 |
54 |
25 |
160 |
|
80WQ50-50-18.5 |
50 |
50 |
2900 |
18.5 |
80 |
52 |
25 |
180 |
|
80WQ65-25-11 |
65 |
25 |
2900 |
11 |
80 |
58 |
25 |
140 |
|
80WQ80-20-11 |
80 |
20 |
2900 |
11 |
80 |
60 |
25 |
140 |
|
100WQ50-22-7.5 |
50 |
22 |
2900 |
7.5 |
100 |
56 |
30 |
130 |
|
100WQ65-20-7.5 |
65 |
20 |
2900 |
7.5 |
100 |
58 |
30 |
130 |
|
100WQ65-30-11 |
65 |
30 |
2900 |
11 |
100 |
56 |
30 |
150 |
|
100WQ80-15-7.5 |
80 |
15 |
2900 |
7.5 |
100 |
60 |
30 |
130 |
|
100WQ80-20-11 |
80 |
20 |
2900 |
11 |
100 |
58 |
30 |
150 |
|
100WQ80-30-15 |
80 |
30 |
2900 |
15 |
100 |
56 |
30 |
170 |
|
100WQ80-40-18.5 |
80 |
40 |
2900 |
18.5 |
100 |
54 |
30 |
190 |
|
100WQ80-50-30 |
80 |
50 |
2900 |
30 |
100 |
52 |
30 |
250 |
|
100WQ100-25-15 |
100 |
25 |
2900 |
15 |
100 |
60 |
30 |
170 |
|
100WQ100-35-22 |
100 |
35 |
2900 |
22 |
100 |
58 |
30 |
210 |
|
100WQ100-45-30 |
100 |
45 |
2900 |
30 |
100 |
56 |
30 |
250 |
|
100WQ120-20-15 |
120 |
20 |
2900 |
15 |
100 |
62 |
30 |
170 |
|
150WQ130-30-22 |
130 |
30 |
2900 |
22 |
150 |
64 |
50 |
260 |
|
150WQ150-20-18.5 |
150 |
20 |
2900 |
18.5 |
150 |
66 |
50 |
240 |
|
150WQ150-30-30 |
150 |
30 |
2900 |
30 |
150 |
64 |
50 |
300 |
|
150WQ150-40-37 |
150 |
40 |
2900 |
37 |
150 |
62 |
50 |
350 |
|
150WQ150-50-45 |
150 |
50 |
2900 |
45 |
150 |
60 |
50 |
400 |
|
150WQ180-20-22 |
180 |
20 |
2900 |
22 |
150 |
66 |
50 |
260 |
|
150WQ200-25-30 |
200 |
25 |
2900 |
30 |
150 |
66 |
50 |
300 |
|
150WQ200-35-45 |
200 |
35 |
2900 |
45 |
150 |
64 |
50 |
400 |
|
150WQ250-20-30 |
250 |
20 |
2900 |
30 |
150 |
68 |
50 |
300 |
|
200WQ200-20-22 |
200 |
20 |
1450 |
22 |
200 |
68 |
60 |
300 |
|
200WQ250-15-22 |
250 |
15 |
1450 |
22 |
200 |
70 |
60 |
300 |
|
200WQ250-20-30 |
250 |
20 |
1450 |
30 |
200 |
68 |
60 |
350 |
|
200WQ250-30-45 |
250 |
30 |
1450 |
45 |
200 |
66 |
60 |
420 |
|
200WQ300-18-30 |
300 |
18 |
1450 |
30 |
200 |
70 |
60 |
350 |
|
200WQ300-25-45 |
300 |
25 |
1450 |
45 |
200 |
68 |
60 |
420 |
|
200WQ350-20-37 |
350 |
20 |
1450 |
37 |
200 |
72 |
60 |
380 |
|
200WQ400-15-37 |
400 |
15 |
1450 |
37 |
200 |
72 |
60 |
380 |
|
250WQ300-20-37 |
300 |
20 |
1450 |
37 |
250 |
70 |
70 |
450 |
|
250WQ350-25-55 |
350 |
25 |
1450 |
55 |
250 |
70 |
70 |
550 |
|
250WQ400-20-45 |
400 |
20 |
1450 |
45 |
250 |
72 |
70 |
500 |
|
250WQ450-22-55 |
450 |
22 |
1450 |
55 |
250 |
70 |
70 |
550 |
|
250WQ500-18-45 |
500 |
18 |
1450 |
45 |
250 |
72 |
70 |
500 |
|
250WQ550-20-75 |
550 |
20 |
1450 |
75 |
250 |
70 |
70 |
650 |
|
300WQ400-25-55 |
400 |
25 |
1450 |
55 |
300 |
70 |
80 |
650 |
|
300WQ500-20-55 |
500 |
20 |
1450 |
55 |
300 |
72 |
80 |
650 |
|
300WQ600-18-55 |
600 |
18 |
1450 |
55 |
300 |
74 |
80 |
650 |
|
300WQ600-25-75 |
600 |
25 |
1450 |
75 |
300 |
72 |
80 |
750 |
|
300WQ700-20-75 |
700 |
20 |
1450 |
75 |
300 |
74 |
80 |
750 |
|
300WQ800-15-75 |
800 |
15 |
1450 |
75 |
300 |
76 |
80 |
750 |
|
350WQ600-18-55 |
600 |
18 |
1450 |
55 |
350 |
74 |
90 |
750 |
|
350WQ700-20-75 |
700 |
20 |
1450 |
75 |
350 |
74 |
90 |
850 |
|
350WQ800-18-75 |
800 |
18 |
1450 |
75 |
350 |
76 |
90 |
850 |
|
350WQ900-15-75 |
900 |
15 |
1450 |
75 |
350 |
78 |
90 |
850 |
|
400WQ800-20-90 |
800 |
20 |
1450 |
90 |
400 |
74 |
100 |
1000 |
|
400WQ1000-18-90 |
1000 |
18 |
1450 |
90 |
400 |
76 |
100 |
1000 |
|
400WQ1200-15-90 |
1200 |
15 |
1450 |
90 |
400 |
78 |
100 |
1000 |
|
500WQ1200-15-90 |
1200 |
15 |
1450 |
90 |
500 |
78 |
120 |
1150 |
|
500WQ1500-12-90 |
1500 |
12 |
1450 |
90 |
500 |
80 |
120 |
1150 |
|
500WQ1800-10-90 |
1800 |
10 |
1450 |
90 |
500 |
80 |
120 |
1150 |
|
600WQ1500-15-110 |
1500 |
15 |
980 |
110 |
600 |
78 |
130 |
1400 |
|
600WQ2000-12-110 |
2000 |
12 |
980 |
110 |
600 |
80 |
130 |
1400 |
|
600WQ2500-10-132 |
2500 |
10 |
980 |
132 |
600 |
80 |
130 |
1550 |
If you cannot find the required specifications or model in our product range, please contact us at any time. Our technical specialists will provide prompt model selection assistance and a customized technical solution.
Hot Tags: wq fixed-installation submersible sewage pump, China wq fixed-installation submersible sewage pump manufacturers, factory


