QJ Deep-Well Submersible Pump

QJ Deep-Well Submersible Pump

The QJ deep-well pump, also known as a QJ well-submersible pump, is a vertical multistage centrifugal pumping unit in which the submersible motor is directly coupled to the pump and the complete unit operates underwater. It typically comprises a submersible motor, pump body, discharge column pipe, power cable and control cabinet.
The motor is installed below the pump. Water enters the impeller stages and is pressurized in stages before being conveyed to the surface through the discharge column pipe.
Send Inquiry
Description

Product Overview

 

The QJ deep-well pump, also known as a QJ well-submersible pump, is a vertical multistage centrifugal pumping unit in which the submersible motor is directly coupled to the pump and the complete unit operates underwater. It typically comprises a submersible motor, pump body, discharge column pipe, power cable and control cabinet.

The motor is installed below the pump. Water enters the impeller stages and is pressurized in stages before being conveyed to the surface through the discharge column pipe.

Designed for deep-well water lifting, the QJ series is manufactured to GB/T 2816, Submersible Pumps for Wells. The stated series-wide flow range is 5–650 m³/h, with total head exceeding 600 m for some configurations. Applications include deep-well water supply, mine drainage and municipal water systems.

 

Model designation example: 200QJ 50-65/5

  • 200: Nominal well diameter designation; confirm the required minimum well diameter against the specific pump's dimensions.
  • QJ: Submersible pump for wells.
  • 50: Rated flow, in m³/h.
  • 65: Rated head, in metres.
  • 5: Number of impeller stages.

 

Product Features

 

1. Pump and motor operate underwater

The pump and submersible motor are directly coupled and operate as a submerged unit. A conventional pump room is not required, which can reduce installation space and civil-work costs. Installation generally involves lowering the unit into the well or sump and connecting the discharge pipe and cable.

2. Multistage design for high head

The vertical multistage arrangement raises pressure stage by stage. The source states that total head can exceed 600 m in some configurations, supporting deep-well applications.

3. No priming required

Because the pump operates submerged, it does not require priming or vacuum priming before startup.

4. Water-lubricated bearings

The pump's guide bearings are water-lubricated and cooled by the pumped water. No grease or oil is required for these bearings, avoiding lubricant contamination of the water.

5. Submersible motor

The motor is available in water-filled or oil-filled designs. Its stator windings use waterproof insulation or sealing. A temperature-protection device can be fitted to help prevent overheating.

6. Efficient operation

The pump uses a hydraulic design with cast impellers and diffusers. Smooth flow passages are intended to support good hydraulic efficiency and compliance with applicable energy-efficiency criteria.

7. Low noise at ground level

Since the pump and motor operate underwater, there are no exposed moving parts at ground level, and noise and vibration transmitted to the surface are reduced.

8. Material options

Wetted parts can be selected from cast iron, ductile iron, 304 stainless steel or 316L stainless steel, according to water quality and corrosion requirements.

 

Applications

 

The QJ series is used for deep-well water extraction and groundwater development, including:

  • Agricultural and landscape irrigation: Deep-well water supply for irrigation, sprinklers, drip systems and landscaping.
  • Municipal water supply and drainage: Water extraction from municipal supply wells and other water-system duties.
  • Mine drainage: Mine-water discharge, groundwater control and mining water supply.
  • Industrial water supply: Cooling-water systems, boiler feed and general industrial water service.
  • Construction and tunnelling: Groundwater removal from construction excavations and tunnel works.
  • Rural and remote water supply: Drinking-water supply for people and livestock.
  • Ground-source heat-pump systems: Groundwater extraction and reinjection, subject to system design requirements.
  • Geothermal applications: Extraction of geothermal hot water, subject to the pump's material and temperature limits.
  • Fire-water supply: Water extraction from dedicated fire-water wells, subject to applicable system approvals.

 

Technical Specifications

 

1. Design Standards

Design, manufacture and inspection are stated to comply with GB/T 2816, Submersible Pumps for Wells, and GB/T 2818, Submersible Asynchronous Motors for Wells. Hydraulic performance testing is conducted with reference to applicable standards.

 

2. Construction and Operating Principle

The QJ pump consists of a submersible motor, a multistage pump assembly, discharge column pipe, power cable and control cabinet. The motor is positioned below the pump and connected directly through a coupling.

Water enters through the intake at the lower part of the pump. The first impeller raises its pressure, after which a diffuser guides it to the next impeller. This process repeats through the stages, and the pressurized water is delivered to the surface through the discharge pipe.

 

3. Pump Construction

The pump is a vertical, multistage, sectional design. Each stage comprises an impeller, diffuser and casing section, which are secured together by tie rods. The pump shaft is supported by upper and lower guide bearings; the guide bearings are water-lubricated.

 

4. Motor Construction

The submersible motor is a water-filled or oil-filled three-phase asynchronous motor. Its stator windings use water-resistant magnet wire or sealed waterproof insulation. The motor housing is made of stainless steel or cast iron. A mechanical seal or oil seal is fitted at the shaft extension to help prevent sand from entering the motor.

 

5. Wetted-Part Material Options

Component

Material options

Typical service

Impeller

HT200 cast iron, QT500 ductile iron, 304 / 316L stainless steel

Clean water and mildly corrosive water

Diffuser / casing

HT200 cast iron, 304 / 316L stainless steel

Clean water and low-sand water

Pump shaft

2Cr13, 304 or 316L stainless steel

Clean or corrosive water, subject to compatibility

Discharge pipe

Steel or stainless-steel pipe

Selected according to water quality and pressure rating

 

6. Submersible-Motor Specifications

Parameter

Specification

Motor type

Water-filled or oil-filled three-phase asynchronous motor

Rated voltage

380 V / 660 V / 6 kV / 10 kV, depending on power rating

Rated frequency

50 Hz

Protection rating

IP68

Insulation class

Class F

Cooling

Water-cooled; water flow around the motor housing carries away heat

Protection devices

Temperature, overload and leakage protection available

 

7. Installation and Operating Conditions

  • Power supply: Three-phase AC, 50 Hz; the source specifies 380 V or 660 V with voltage variation of ±5%.
  • Water temperature: Up to 20°C standard; up to 40°C under special conditions with sufficient cooling-water flow.
  • Sand content: No more than 0.01% by weight.
  • Chloride content: No more than 400 mg/L.
  • Well conditions: The well should be straight, and its diameter must meet the minimum requirement for the selected pump.
  • Submergence depth: Up to 300 m, as stated for the series.

 

8. Stated Operating Range

Parameter

Stated range

Flow rate, Q

5–650 m³/h across the series

Head per stage

3–30 m, depending on flow

Total head, H

Above 600 m for some configurations

Speed, n

2,850 / 2,900 r/min, 2-pole motor

Suitable well diameter

100–400 mm, depending on model

Maximum submergence depth

≤300 m

Medium temperature

≤20°C standard; ≤40°C for special configurations

Sand content

≤0.01% by weight

Power supply

380 V / 660 V / 6 kV / 10 kV, 50 Hz, according to motor rating

 

Structural Drawings

 

product-1268-714

 

Performance Data Tables

 

Model

Flow rate (m³/h)

Head per stage (m)

Number of stages

Total head range (m)

Motor power range (kW)

Suitable well diameter (mm)

Discharge size

Pump-body outside diameter (mm)

150QJ5

5

6~20

2~25

12~500

0.55~11

150

DN25/DN32

133

150QJ10

10

6~18

2~25

12~450

0.75~18.5

150

DN32/DN40

133

150QJ20

20

6~16

2~22

12~352

1.5~30

150

DN40/DN50

133

150QJ32

32

6~12

2~20

12~240

2.2~37

150

DN50

133

175QJ10

10

8~24

2~20

16~480

1.1~22

175

DN32/DN40

159

175QJ20

20

8~22

2~18

16~396

2.2~37

175

DN40/DN50

159

175QJ32

32

8~18

2~16

16~288

3.0~45

175

DN50

159

175QJ40

40

6~16

2~15

12~240

3.0~55

175

DN65

159

175QJ50

50

6~14

2~14

12~196

4.0~55

175

DN65

159

200QJ10

10

10~30

2~20

20~600

1.5~30

200

DN32/DN40

184

200QJ20

20

10~28

2~18

20~504

3.0~45

200

DN40/DN50

184

200QJ32

32

10~26

2~16

20~416

4.0~55

200

DN50

184

200QJ40

40

8~24

2~15

16~360

5.5~75

200

DN65

184

200QJ50

50

8~20

2~14

16~280

5.5~75

200

DN65

184

200QJ63

63

8~18

2~12

16~216

7.5~75

200

DN80

184

200QJ80

80

6~14

2~10

12~140

7.5~75

200

DN80

184

200QJ100

100

6~12

2~8

12~96

11~75

200

DN100

184

250QJ20

20

12~38

2~18

24~684

4.0~75

250

DN40/DN50

233

250QJ32

32

12~36

2~16

24~576

5.5~90

250

DN50

233

250QJ40

40

10~34

2~15

20~510

7.5~110

250

DN65

233

250QJ50

50

10~30

2~14

20~420

7.5~110

250

DN65

233

250QJ63

63

10~28

2~12

20~336

11~110

250

DN80

233

250QJ80

80

8~24

2~10

16~240

11~110

250

DN80

233

250QJ100

100

8~20

2~8

16~160

15~110

250

DN100

233

250QJ125

125

6~16

2~7

12~112

18.5~110

250

DN100

233

250QJ140

140

6~14

2~6

12~84

18.5~110

250

DN125

233

250QJ160

160

6~12

2~5

12~60

22~110

250

DN125

233

250QJ200

200

4~8

2~4

8~32

22~75

250

DN150

233

300QJ20

20

15~50

2~16

30~800

5.5~90

300

DN40/DN50

281

300QJ32

32

15~48

2~15

30~720

7.5~110

300

DN50

281

300QJ40

40

12~45

2~14

24~630

11~132

300

DN65

281

300QJ50

50

12~42

2~13

24~546

11~160

300

DN65

281

300QJ63

63

12~40

2~12

24~480

15~160

300

DN80

281

300QJ80

80

10~36

2~11

20~396

18.5~185

300

DN80

281

300QJ100

100

10~32

2~10

20~320

22~200

300

DN100

281

300QJ125

125

8~28

2~9

16~252

22~220

300

DN100

281

300QJ140

140

8~24

2~8

16~192

22~220

300

DN125

281

300QJ160

160

8~22

2~7

16~154

30~220

300

DN125

281

300QJ200

200

6~18

2~6

12~108

30~220

300

DN150

281

300QJ240

240

6~14

2~5

12~70

37~185

300

DN150

281

300QJ320

320

4~10

2~4

8~40

37~185

300

DN200

281

350QJ40

40

15~55

2~14

30~770

11~160

350

DN65

330

350QJ50

50

15~52

2~13

30~676

15~185

350

DN65

330

350QJ63

63

15~50

2~12

30~600

18.5~220

350

DN80

330

350QJ80

80

12~48

2~11

24~528

22~250

350

DN80

330

350QJ100

100

12~45

2~10

24~450

30~280

350

DN100

330

350QJ125

125

10~40

2~9

20~360

30~300

350

DN100

330

350QJ140

140

10~36

2~8

20~288

37~300

350

DN125

330

350QJ160

160

10~34

2~7

20~238

45~300

350

DN125

330

350QJ200

200

8~30

2~6

16~180

45~300

350

DN150

330

350QJ240

240

8~26

2~5

16~130

55~280

350

DN150

330

350QJ320

320

6~20

2~4

12~80

55~250

350

DN200

330

350QJ400

400

6~16

2~3

12~48

55~220

350

DN200

330

400QJ50

50

18~65

2~15

36~975

15~220

400

DN65

375

400QJ63

63

18~62

2~14

36~868

18.5~250

400

DN80

375

400QJ80

80

15~60

2~13

30~780

22~280

400

DN80

375

400QJ100

100

15~55

2~12

30~660

30~315

400

DN100

375

400QJ125

125

12~50

2~11

24~550

37~355

400

DN100

375

400QJ140

140

12~46

2~10

24~460

45~400

400

DN125

375

400QJ160

160

12~42

2~9

24~378

55~400

400

DN125

375

400QJ200

200

10~38

2~8

20~304

55~450

400

DN150

375

400QJ240

240

10~34

2~7

20~238

75~450

400

DN150

375

400QJ320

320

8~28

2~6

16~168

75~500

400

DN200

375

400QJ400

400

8~24

2~5

16~120

90~500

400

DN200

375

400QJ500

500

6~18

2~4

12~72

90~450

400

DN250

375

If you cannot find the required specifications or model in our product range, please contact us at any time. Our technical specialists will provide prompt model selection assistance and a customized technical solution.

Hot Tags: qj deep-well submersible pump, China qj deep-well submersible pump manufacturers, factory

Send Inquiry