Product Overview
The stainless steel vortex pump is a single-stage, cantilever-type vortex pump. Both the suction and discharge connections are oriented vertically upward.
The vortex impeller is designed to move freely in the axial direction along the shaft. This allows the axial clearances between the impeller and the pump casing and cover to remain equal on both sides. The clearance can be adjusted using paper gaskets.
Two shaft-sealing options are available:
- Packed gland seal
- Single-end mechanical seal
The pump and motor are mounted together on a common baseplate.
The stainless steel vortex pump is suitable for transferring liquids with the following properties:
- Temperature: −20°C to +80°C
- Viscosity: ≤ 5°E, as stated in the source specification
- Non-corrosive
- Free of solid particles
Product Features
The pump is characterized by:
Compact dimensions
Low overall weight
Attractive appearance
Convenient maintenance
Simple structure
Flexible shaft-sealing options
Applications
The stainless steel vortex pump is widely used for industrial water and high-pressure water-supply applications in:
- Chemical plants
- Petroleum facilities
- Textile and light-industry plants
- Power stations
- Industrial and mining enterprises
Typical applications include:
- Industrial production water
- Boiler feedwater
- Heating-system water supply
- High-rise building water supply
- Firefighting water systems
- Heat-removal and circulation systems
- Production of refrigerated beverages
- Cooling and heat-relief water systems
- High-pressure water supply for canteen and food-service utensil sterilization
Technical Specifications
Main Components
The main components of the stainless steel vortex pump include:
- Pump casing
- Pump cover
- Vortex impeller
- Bearing-bracket assembly
- Claw-type flexible coupling
- Packing gland or mechanical-seal cover
- Single-end mechanical-seal assembly, applicable to WM-type pumps
The pump and motor are installed on a common baseplate.
Suction and Discharge Arrangement
The pump's suction and discharge passages are initially oriented diagonally upward. Elbow fittings are then used to change the flow direction to vertical upward.
Axial Impeller Adjustment
The impeller can move freely in the axial direction along the shaft. This ensures that the axial clearances between the impeller and the pump casing and cover remain equal on both sides.
Paper gaskets may be used to adjust the clearance. The paper gasket must be installed outside the asbestos gasket located at the pump-cover outlet.
Safety and modernization note: Asbestos-containing gasket materials should be replaced with suitable non-asbestos gasket materials that meet the required temperature, pressure, and chemical-compatibility conditions.
Structural Drawings

Performance Data Tables
|
Model |
Flow Rate |
Head |
Speed |
Power |
|
(m³/h) |
(m) |
(r/min) |
(kW) |
|
|
1W2.4-10.5(Single-stage) |
2.4 |
105 |
2900 |
3 |
|
1W2.5-12(Single-stage) |
2.5 |
120 |
2900 |
3 |
|
25W-25(Single-stage) |
1.44 |
25 |
2900 |
0.75 |
|
32W-30(Single-stage) |
2.88 |
30 |
2900 |
1.5 |
|
32W-75(Single-stage) |
2.88 |
75 |
2900 |
4 |
|
40W-40(Single-stage) |
5.4 |
40 |
2900 |
4 |
|
40W-90(Single-stage) |
5.4 |
90 |
2900 |
7.5 |
|
50W-45(Single-stage) |
9 |
45 |
2900 |
5.5 |
|
65W-50(Single-stage) |
14.4 |
50 |
2900 |
11 |
|
1.58D-0.7(Single-stage) |
2.4 |
105 |
1450 |
3 |
If you cannot find the required specifications or model in our product range, please contact us at any time. Our technical specialists will provide prompt model selection assistance and a customized technical solution.
Hot Tags: stainless steel vortex pump, China stainless steel vortex pump manufacturers, factory


