Product Overview
The FZB fluoroplastic-lined self-priming pump is a self-priming chemical centrifugal pump designed and manufactured in accordance with international standards and incorporating advanced non-metallic pump manufacturing technology.
The pump casing consists of a metallic outer shell made of HT200 cast iron and an inner lining of fluoroplastic, including F46, FEP, or PFA. The pump cover, impeller, and other wetted components are manufactured by integrally sintering and compression-molding a fluoroplastic alloy over metallic inserts. This construction combines the mechanical strength of metal pumps with the excellent corrosion resistance of fluoroplastics.
One of the pump's most notable features is its self-priming capability. After the initial priming, no additional filling is required for subsequent starts. The pump can directly draw liquids from locations below the pump installation level. Depending on the density of the pumped medium, the self-priming lift generally ranges from 2 to 4 m. When handling clean water, the self-priming lift can exceed 4 m. This makes the FZB an ideal alternative to bulky submerged pumps.
The product is available in several configurations according to the installation and connection method:
FZB: Long-bracket, shaft-coupled configuration
FZB-D: Short-bracket, direct-coupled configuration
FZB-L: Long-bracket configuration with a coupling
The complete product range covers more than ten specifications, with flow rates ranging from 1.5 to 200 m³/h and heads ranging from 10 to 50 m. It can meet the requirements of various installation conditions and operating environments.
Model Designation Example
Taking 50FZB-30L as an example:
50 - Suction inlet diameter, in millimeters
FZ - Series designation for the fluoroplastic-lined self-priming pump
B - Corrosion-resistant material grade
30 - Rated head, in meters
L - Long-bracket coupling configuration
Product Features
1. Composite Construction with a Metal Casing and Fluoroplastic Lining
The pump casing consists of a metal outer shell made of HT200 cast iron with an inner lining of fluoroplastic, including F46, FEP, or PFA. The pump cover, impeller, and other wetted components are manufactured by integrally sintering and compression-molding fluoroplastic over metallic inserts.
This composite construction combines the excellent corrosion resistance of fluoroplastics with the mechanical strength and pressure-bearing capacity of metal pumps. Its resistance to thermal deformation and vibration is superior to that of fully plastic self-priming pumps.
2. Outstanding Corrosion Resistance
Fluoroplastics such as F46, FEP, and PFA are virtually resistant to attack by most chemical media. They can handle highly corrosive substances, including:
- Sulfuric acid
- Hydrochloric acid
- Nitric acid
- Hydrofluoric acid
- Aqua regia
- Strong alkalis
- Strong oxidizing agents
- Organic solvents
The pump can continuously handle highly corrosive media at temperatures ranging from −20°C to 120°C without damage. When equipped with newly developed high-temperature-resistant fluoroplastic materials, the applicable temperature can reach 180°C.
3. Excellent Self-Priming Performance and Easy Operation
A liquid storage chamber is integrated into the pump casing and connected to the working chamber through return and circulation ports, forming an external-mixing self-priming system.
Before initial operation, the pump casing only needs to be completely filled with liquid. For subsequent starts, no additional priming is required-the pump can be started directly. The self-priming lift is determined according to the density of the pumped medium and generally ranges from 2 to 4 m. For certain reinforced models, the self-priming lift can exceed 4 m.
4. Externally Mounted Bellows Mechanical Seal for Reliable Sealing
The shaft seal adopts an advanced externally mounted PTFE bellows mechanical seal. The stationary ring is made of 99.9% alumina ceramic or silicon nitride, while the rotating ring is made of a PTFE-filled material, providing excellent corrosion resistance, wear resistance, and sealing performance.
The externally mounted design provides multiple layers of protection and extends the service life of the mechanical seal. When pumping media containing impurity particles, the pump can be equipped with a single-end-face, hard-on-hard mechanical seal without cooling water, using a silicon carbide versus silicon carbide sealing configuration.
5. Complementary Positioning Compared with IHF Fluoroplastic-Lined Centrifugal Pumps
The IHF fluoroplastic-lined pump is a conventional centrifugal pump that requires either flooded suction installation or a foot valve. It is suitable for applications with normal liquid inlet conditions.
The FZB self-priming pump is specifically designed for special operating conditions, such as drawing liquid from low-level tanks. By utilizing its self-priming capability, it can draw liquid from a level below the pump casing without a foot valve. The IHF and FZB series therefore complement each other in different application conditions.
6. Reinforced Cast-Steel Suction and Discharge Connections
Both the suction and discharge ports are reinforced with cast-steel components, enhancing the overall pressure resistance of the pump. The maximum design pressure can reach 1.6 MPa.
7. Modular Design with High Interchangeability
Components such as the pump casing, impeller, and mechanical seal used in the FZB, FZB-D, and FZB-L configurations are interchangeable.
This high degree of standardization improves spare-parts compatibility and helps reduce maintenance costs. The pump adopts an international-standard, shaft-coupled back-pull-out design, allowing maintenance and inspection to be carried out without dismantling the connected piping.
8. Smooth Operation and Long Service Life
The pump features a compact and rational structure, making disassembly, inspection, and maintenance convenient.
It offers the following advantages:
- Excellent corrosion resistance
- High wear resistance
- High-temperature resistance
- Resistance to aging
- High mechanical strength
- Smooth and stable operation
- Advanced and rational structural design
- Reliable and effective sealing performance
Applications
All wetted components of the FZB fluoroplastic-lined self-priming pump are manufactured from fluoroplastic materials. Combined with its self-priming capability, the pump is suitable for a wide range of applications, particularly in the following industries:
Chemical Processing, Acid Production, and Alkali Production
Transfer of sulfuric acid, hydrochloric acid, nitric acid, phosphoric acid, hydrofluoric acid, and other acids at various concentrations, as well as alkaline media such as caustic soda and ammonia water.
Liquid Transfer from Low-Level Tanks
Transfer of corrosive liquids from underground tanks and low-level storage tanks to designated locations. It is also suitable for transferring acids and alkalis from tanks without bottom outlets.
Truck and Ship Unloading
Unloading and transferring chemical media from vehicles and vessels. The self-priming pump can be deployed at different workstations to draw and convey liquids as required.
Multi-Tank Circulation and Material Transfer
Circulation between multiple acid tanks, transfer from metering tanks, and other similar processes.
Petrochemical Industry:
Transfer of corrosive materials, organic solvents, and high-value chemical media.
Non-Ferrous Metal Smelting and Rare-Earth Processing
Electrolyte transfer, rare-earth separation, and acid circulation in hydrometallurgical processes.
Automotive Manufacturing and Surface Treatment:
Pickling processes, electroplating solution transfer, and pickling solution circulation.
Pesticide, Dyestuff, and Pharmaceutical Industries:
Transfer of pesticide concentrates, dye intermediates, pharmaceutical intermediates, and various corrosive reaction media.
Pulp and Paper Industry:
Transfer of pulp bleaching solutions and various corrosive chemicals.
Electronics and Electrolytic Foil Manufacturing:
Transfer of corrosive media in electronic manufacturing processes and use in electrolytic foil production.
Research Institutions and Defense Industries:
Transfer of corrosive media in laboratories and use in chemical processes for the defense industry.
Environmental Protection and Water Treatment:
Acidic and alkaline wastewater treatment, acid dosing, and related chemical treatment processes.
Food Industry:
Transfer of corrosive cleaning solutions used in food processing, when food-grade fluoroplastic materials are selected.
Technical Specifications
1. Design Standards
The pump is designed and manufactured in accordance with international standards while incorporating non-metallic pump manufacturing technology.
Certain series comply with the requirements of ISO 2858, GB 5662, and DIN 24256.
2. Configuration and Operating Principle
Pump Configuration
The FZB is a single-stage, single-suction, horizontal centrifugal self-priming pump. It is available in the following configurations:
- FZB: Long-bracket, shaft-coupled configuration
- FZB-D: Short-bracket, direct-coupled configuration
- FZB-L: Long-bracket configuration with a coupling
The pump features axial suction and radial discharge.
Operating Principle
The FZB self-priming pump adopts an external-mixing self-priming design.
Before the initial start-up, the pump casing must be completely filled with liquid, or the casing must already contain a sufficient amount of liquid. After start-up, the impeller rotates at high speed and discharges the liquid originally contained in the pump toward the gas-liquid separation chamber at the discharge outlet.
As a vacuum forms at the pump inlet, air from the suction pipe is drawn into the pump. The liquid discharged into the gas-liquid separation chamber flows back toward the impeller suction inlet because it is no longer driven by a continuous liquid supply. It mixes with the newly drawn-in air to form a gas-liquid mixture, which is then discharged by the impeller into the gas-liquid separation chamber.
The air is discharged from the chamber, while the liquid returns to the pump casing. This process repeats until all the air in the suction line has been expelled and the pumped liquid is successfully drawn into the pump.
3. Wetted-Component Materials and Manufacturing Process
- Pump casing: HT200 cast-iron outer casing with a fluoroplastic lining, such as F46/FEP
- Pump cover and impeller: Metallic inserts integrally coated with fluoroplastic through sintering and compression molding
- Wetted-component materials: F46 (FEP), F4 (PTFE), PFA, and other fluoroplastic materials
- Gaskets in contact with the pumped medium: Nitrile rubber, fluoroelastomer F246, or fluoroplastics such as F4 and F46, selected according to the specific operating conditions
4. Shaft Sealing System
The pump uses an externally mounted PTFE bellows mechanical seal.
The stationary ring is available in 99.9% alumina ceramic, silicon nitride, or silicon carbide. The rotating ring is made of filled PTFE or silicon carbide.
For media containing impurity particles, the pump can be equipped with a hard-on-hard mechanical seal, using silicon carbide against silicon carbide.
5. Drive System and Direction of Rotation
The electric motor drives the pump directly through a flexible coupling.
When viewed from the motor side toward the pump, the impeller rotates clockwise.
6. Operating Conditions
|
Parameter |
Specification |
|
Flow rate, Q |
1.5–200 m³/h; standard range for the FZB series |
|
Head, H |
10–50 m; up to 80 m for certain models |
|
Speed, n |
2,900 r/min; direct-coupled motor drive |
|
Design pressure |
≤ 1.6 MPa; standard design pressure |
|
Medium temperature |
−20°C to 120°C; up to 180°C with newly developed high-temperature-resistant materials |
|
Inlet diameter |
25–125 mm |
|
Outlet diameter |
25–100 mm |
|
Motor power |
0.75–37 kW, calculated according to the density and viscosity of the pumped medium |
|
Self-priming lift |
2–4 m, determined according to the density of the pumped medium; applicable to clean-water conditions |
|
NPSH required |
2.0–6.0 m, depending on the model |
|
Efficiency |
20%–60%; generally increasing with flow rate |
The operating parameters listed above are standard reference values. Final selection should be based on the actual medium properties and operating conditions.
7. Important Operating Precautions
Before the initial start-up, completely fill the pump casing with the medium to be pumped. Dry running is strictly prohibited.
Check that the motor rotation direction matches the direction marked on the pump. Reverse rotation is strictly prohibited.
During installation, minimize hydraulic losses in the suction line. No more than two 90-degree elbows should be installed in the inlet piping.
Tighten the bolts of the suction-pipe connection evenly and ensure a reliable, airtight seal. Air leakage is not permitted. Soft flange gaskets, such as fluoroelastomer gaskets, are recommended; otherwise, the self-priming performance may be seriously affected.
If the pump fails to discharge liquid within 7–10 minutes while operating within the specified self-priming height range, stop the pump immediately and investigate the cause. In particular, check whether the suction line is leaking air. This prevents the liquid inside the pump from overheating and damaging the pump.
If the pump is restarted within a short period, it is not necessary to refill the pump casing with priming liquid. After an extended shutdown or in the event of leakage, check the liquid level and replenish the liquid as required.
If the pump will remain unused for an extended period during winter, drain all liquid from the pump casing to prevent freeze damage.
Structural Drawings

Performance Data Tables
|
Model |
Flow Rate (m³/h) |
Head (m) |
Inlet Diameter (mm) |
Outlet Diameter (mm) |
Shaft Power (kW) |
Motor Power (kW) |
Speed (r/min) |
NPSH Required (m) |
Efficiency (%) |
Self-Priming Lift (m) |
Self-Priming Time (s) |
|
25FZB-20 |
1.6 |
20 |
φ25 |
φ25 |
- |
2.2 |
2900 |
3 |
20 |
1.5 |
150 |
|
25FZB-15L |
3.6 |
15 |
φ25 |
- |
- |
1.5 |
2900 |
3 |
20 |
2 |
180 |
|
25FZB-20L |
3.6 |
18 |
φ25 |
- |
- |
2.2 |
2900 |
3 |
20 |
2 |
180 |
|
32FZB-15 |
5 |
15 |
φ32 |
φ32 |
0.92 |
1.5 |
2900 |
2 |
45 |
3 |
150 |
|
32FZB-20 |
3.2 |
20 |
φ32 |
φ25 |
- |
2.2 |
2900 |
3 |
30 |
1.5 |
150 |
|
40FZB-20 |
6.3/8 |
20 |
φ40 |
φ32/φ40 |
1.6 |
2.2/3 |
2900 |
2 |
42/48 |
3 |
150/180 |
|
40FZB-30 |
8 |
30 |
φ40 |
φ40 |
1.95 |
3 |
2900 |
2 |
48 |
3 |
150 |
|
40FZB-30L |
8 |
30 |
φ40 |
φ40 |
- |
4 |
2900 |
2 |
48 |
3 |
150 |
|
50FZB-20 |
12/12.5 |
20 |
φ50 |
φ32/φ50 |
1.9 |
2.2/3 |
2900 |
2.5/3.0 |
42/52 |
3 |
150/180 |
|
50FZB-30 |
12.5 |
30 |
φ50 |
φ50 |
- |
4 |
2900 |
3.5 |
48 |
3 |
180 |
|
50FZB-30L |
12 |
30 |
φ50 |
φ50 |
2.4 |
46085 |
2900 |
2.5 |
52 |
3 |
150 |
|
50FZB-45 |
12.5 |
45 |
φ50 |
φ32/φ50 |
- |
7.5 |
2900 |
2.5/3.5 |
35/48 |
3 |
150/200 |
|
50FZB-45L |
12 |
45 |
φ50 |
φ32 |
- |
7.5 |
2900 |
2.5 |
35 |
3 |
150 |
|
65FZB-20 |
25 |
20 |
φ65 |
φ50 |
2.72 |
46085 |
2900 |
3.0/4.0 |
55 |
3.0/3.5 |
120 |
|
65FZB-30 |
25 |
30 |
φ65 |
φ50 |
4.1 |
5.5/7.5 |
2900 |
3.0/4.0 |
55 |
3.0/3.5 |
120/180 |
|
65FZB-30L |
25 |
30 |
φ65 |
φ50 |
- |
7.5 |
2900 |
3 |
55 |
3.5 |
200 |
|
65FZB-45 |
25 |
45 |
φ65 |
φ40 |
- |
11 |
2900 |
4 |
42 |
3 |
200 |
|
80FZB-20 |
40 |
20 |
φ80 |
φ65 |
4.3 |
5.5 |
2900 |
3.5 |
55 |
4 |
100 |
|
80FZB-30 |
50 |
30 |
φ80 |
φ65 |
7.8 |
11 |
2900 |
3.5/4.5 |
58 |
3.0/4.0 |
100/180 |
|
80FZB-30L |
50 |
30 |
φ80 |
φ65 |
- |
11 |
2900 |
3.5 |
- |
4 |
150 |
|
80FZB-45 |
50 |
45 |
φ80 |
φ65 |
- |
15 |
2900 |
4.0/4.5 |
53 |
3.0/4.0 |
180/200 |
|
80FZB-45L |
50 |
45 |
φ80 |
φ65 |
- |
15 |
2900 |
4 |
- |
4 |
180 |
|
100FZB-32 |
100 |
32 |
φ100 |
φ80 |
- |
18.5 |
2900 |
6 |
48 |
3 |
250 |
|
100FZB-30L |
100 |
30 |
φ100 |
φ80 |
- |
18.5 |
2900 |
6 |
60 |
3 |
150 |
|
100FZB-45 |
100 |
45 |
φ100 |
φ80 |
- |
30 |
2900 |
6 |
55 |
3 |
250 |
|
125FZB-32 |
200 |
32 |
φ125 |
φ100 |
- |
37 |
2900 |
6 |
- |
3 |
- |
If you cannot find the required specifications or model in our product range, please contact us at any time. Our technical specialists will provide prompt model selection assistance and a customized technical solution.
Hot Tags: fzb fluoroplastic-lined self-priming pump, China fzb fluoroplastic-lined self-priming pump manufacturers, factory


