Product Overview
The stainless steel magnetic vortex pump is a type of vortex centrifugal pump. Its main components include the impeller, pump casing, and pump cover.
The impeller is a disc-shaped component with evenly distributed radial blades around its circumference. An annular flow passage is formed between the impeller and the pump casing. Both the suction inlet and discharge outlet are located near the outer circumference of the impeller.
A partition separates the suction and discharge passages. During operation, the liquid inside the pump can be considered as two portions:
- Liquid between the impeller blades
- Liquid circulating within the annular flow passage
As the impeller rotates, the circumferential velocity of the liquid between the blades becomes greater than that of the liquid in the annular passage. This produces an annular circulating flow.
At the same time, the liquid moves from the suction inlet toward the discharge outlet with the impeller. The combined effect of these two motions produces a longitudinal vortex rotating in the same direction as the impeller.
This operating principle gives the pump its name: the vortex pump.
Product Features
The stainless steel magnetic vortex pump is designed for applications requiring high head and relatively low flow.
Main Advantages
High head and low flow rate
The specific speed is generally less than 40, making the pump suitable for high-head, low-flow operating conditions.
Compact and lightweight construction
The pump has a simple structure, small dimensions, and low overall weight.
Self-lubricating circulation system
An internal self-lubricating circuit improves lubrication around the sliding bearings and extends their service life.
Magnetic-eddy-current cooling circuit
A cooling circuit is provided to dissipate heat generated by magnetic eddy currents and maintain reliable operating temperatures.
Adjustable axial impeller clearance
An axial-clearance adjustment mechanism allows the impeller clearance to be corrected when necessary, helping ensure stable long-term operation.
Magnetic-drive leak-free transmission
Magnetic coupling eliminates the need for a dynamic shaft seal and enables enclosed, leak-free transfer of corrosive, flammable, explosive, or toxic liquids.
Applications
The pump is widely used in chemical, pharmaceutical, petroleum, electroplating, food-processing, and related industries.
It can be used to transfer:
- Acids
- Alkalis
- Oils
- Rare or high-value liquids
- Toxic liquids
- Volatile liquids
- Other corrosive or hazardous chemical media
It is also suitable for:
- Circulating-water equipment
- Filtration systems
- Filter-machine support systems
- Process-liquid circulation
When equipped with an explosion-proof motor, the pump is particularly suitable for transferring liquids that are:
- Prone to leakage
- Flammable
- Explosive
- Volatile
Technical Specifications
The stainless steel magnetic vortex pump was developed to address two common limitations of conventional magnetic pumps:
Standard magnetic pumps may provide insufficient head.
High-head magnetic pumps may experience excessive current when operated at low head.
The vortex design provides a relatively high head while allowing operation across a broad low-head range without the typical overcurrent problem, provided that the pump remains within its specified operating limits.
The pump uses magnetic-drive technology to provide sealed, leak-free transmission. It is therefore suitable for transferring:
- Corrosive chemical media
- Flammable liquids
- Explosive liquids
- Highly toxic substances
- Other hazardous process fluids
Depending on the application, the wetted components may be manufactured from corrosion-resistant, high-strength engineering plastics, alumina ceramics, stainless steel, and other compatible materials.
These materials provide:
- Good corrosion resistance
- High mechanical strength
- Reduced contamination of the pumped medium
- Reliable performance in demanding chemical-service conditions
Structural Drawings

Performance Data Tables
|
Model |
Rated |
Suction Inlet Diameter |
Motor Power (kW) |
Pump Casing Material |
Speed, n (r/min) |
||
|
Flow |
Head |
Required NPSH |
|||||
|
Q |
H |
(NPSH) |
|||||
|
(m3/h) |
(m) |
(m) |
|||||
|
C15W-50 |
0.36 |
50 |
3.3 |
15 |
0.55 |
Stainless steel |
2900 |
|
C20W-20 |
0.72 |
20 |
4.3 |
20 |
0.25 |
||
|
C20W-50 |
1 |
50 |
4.3 |
20 |
2.2 |
||
|
C20W-60 |
0.72 |
60 |
4.3 |
20 |
2.2 |
||
|
C25W-25 |
1.44 |
25 |
4.3 |
25 |
0.55 |
||
|
C25W-50 |
2 |
50 |
4.8 |
25 |
2.2 |
||
|
C25W-60 |
1.44 |
60 |
4.8 |
25 |
2.2 |
||
|
C32W-50 |
2.88 |
50 |
4.8 |
32 |
3 |
||
|
C32W-75 |
2.88 |
75 |
5.3 |
32 |
3 |
||
|
C32W-120 |
2.88 |
120 |
6.3 |
32 |
4 |
||
|
C40W-150 |
5.4 |
150 |
6.8 |
40 |
7.5 |
||
|
C10WL-100 |
0.48 |
100 |
4.3 |
10 |
1.5 |
||
|
C10WL-110 |
0.24 |
110 |
4.3 |
10 |
1.5 |
||
|
C10WL-120 |
0.12 |
120 |
4.3 |
10 |
1.5 |
||
If you cannot find the required specifications or model in our product range, please contact us at any time. Our technical specialists will provide prompt model selection assistance and a customized technical solution.
Hot Tags: stainless steel magnetic vortex pump, China stainless steel magnetic vortex pump manufacturers, factory


