Product Overview
The High-Efficiency Energy-Saving Self-Priming Pump is a series of horizontal, single-stage, single-suction centrifugal self-priming pumps featuring optimized hydraulic design, high operating efficiency, reduced energy consumption, and excellent self-priming performance.
The pump adopts an axial-suction and radial-discharge configuration. According to construction and application, the product family mainly includes the following series:
ZX High-Efficiency Energy-Saving Self-Priming Pump: A self-priming centrifugal pump developed through the absorption, adaptation, and improvement of advanced pump technologies. It features compact construction and simple operation, and does not require a foot valve in the piping system.
ZW Non-Clogging Self-Priming Sewage Pump: Combines self-priming and non-clogging sewage-pumping functions. It adopts an axial liquid-return, external-mixing design and can convey wastewater containing large solid particles and long fibrous materials.
ZH Corrosion-Resistant Chemical Self-Priming Pump: A single-stage, single-suction chemical centrifugal pump designed for conveying corrosive media at temperatures ranging from 0°C to 220°C. It is suitable for chemical media containing solid particles smaller than 3 mm.
FZB Fluoroplastic-Alloy Self-Priming Pump: All wetted components are manufactured from fluoroplastic alloy, providing excellent corrosion resistance and self-priming performance.
KQGX High-Efficiency Intelligent Self-Priming Pump: Combines a vertical single-stage pump with a vacuum priming device. It provides automatic self-priming control and is an ideal alternative to submerged pumps, long-shaft pumps, and submersible sewage pumps.
All of these series feature the principle of "prime once, self-prime thereafter." The pump casing only needs to be filled with liquid before the initial start-up. No additional priming is required for subsequent start-ups, allowing the pump to be started directly.
Product Features
1. High Efficiency and Energy Savings
The pump incorporates a newly developed, optimized hydraulic model. Its efficiency is approximately 3%–5% higher than that of conventional self-priming pumps.
The impeller is dynamically balanced to ensure smooth, low-vibration, and low-noise operation while extending bearing service life.
The pump provides significant energy savings and helps ensure that the motor does not operate under overload within the specified operating range.
The second-generation ZW series has optimized its two primary hydraulic components-the pump casing and impeller-achieving energy efficiency improvements of more than 10% compared with the previous generation.
2. Excellent Self-Priming Performance with a Lift of up to 5–7 m
The self-priming height is approximately 1–2 m higher than that of conventional self-priming pumps, while the required self-priming time is shorter.
For example, at a suction lift of 4 m, the ZX series requires approximately 20–40 seconds to complete self-priming.
The pump casing contains a liquid storage chamber. Through the liquid-return and circulation passages, this chamber communicates with the working chamber to form an axial liquid-return, external-mixing self-priming system.
After the initial filling, no foot valve is required in the piping system, significantly simplifying both the piping arrangement and operating procedures.
3. Non-Clogging Impeller Design and Powerful Sewage-Handling Capability
The ZW series uses a unique dual-vane impeller with wide and unobstructed flow passages.
Suspended particles with a diameter of up to 60% of the pump port diameter can pass through the pump.
Fibrous materials with a length of up to five times the pump port diameter can be conveyed.
This design effectively addresses the clogging problems commonly associated with conventional sewage pumps.
4. Wide Material Selection and Excellent Corrosion Resistance
Materials for the wetted components can be selected according to the properties of the pumped medium.
Available materials include:
- Cast iron
- Cast steel
- 304/304L stainless steel
- 316/316L stainless steel
- Duplex stainless steel
- Fluoroplastic alloy, including F46
These material options enable the pump to handle clean water, seawater, acidic and alkaline liquids, organic solvents, and other process media.
All wetted components of the FZB series are manufactured from fluoroplastic alloy, allowing the pump to handle highly corrosive media-including strong acids, strong alkalis, and strong oxidizing agents-at a wide range of concentrations.
5. Compact Construction and Convenient Installation and Maintenance
The pump features a compact structure, small overall dimensions, low operating noise, and a reduced installation footprint.
When equipped with an outdoor-duty motor with an IP54/IP55 protection rating, the pump can be installed outdoors, helping reduce infrastructure costs.
The mechanical seal uses a new-generation wear-resistant friction pair and operates inside an oil chamber, providing favorable lubrication conditions, reliable sealing performance, and extended service life.
6. Comprehensive Automatic Control Functions
An automatic control cabinet can be supplied according to customer requirements.
The system can automatically control pump start-up and shutdown according to changes in liquid level.
This eliminates the need for continuous on-site supervision and facilitates convenient operation and automated system management.
7. Wide Applicable Temperature Range
The standard applicable medium temperature ranges are:
- ZW series: 0°C to 80°C
- ZX/FZB series: 0°C to 120°C
- ZH series: 0°C to 220°C
The ZH series uses a specialized design for high-temperature chemical media.
8. Broad Medium Compatibility
The pump can convey clean water and seawater, as well as acidic or alkaline chemical liquids and general semi-pasty slurries.
It is suitable for media with:
Viscosity of up to 100 cP
Solids concentration of up to 30%, subject to the selected pump configuration and operating conditions
Applications
The High-Efficiency Energy-Saving Self-Priming Pump combines high efficiency, reduced energy consumption, strong self-priming performance, and broad medium compatibility.
It is widely used in the following industries and applications:
- Municipal environmental protection and public works: Municipal wastewater treatment, municipal sewage discharge, river and pond aquaculture, manure handling, and river desilting
- Construction and firefighting: Booster water supply for building fire-protection systems, basement and civil-defense-project drainage, deep foundation-pit dewatering, and industrial or construction-site washdown
- Petrochemical and chemical industries: Conveying acid, alkali, and salt solutions of various concentrations, organic solvents, and corrosive materials used in petroleum refining and chemical-processing units
- Pharmaceutical and pesticide industries: Conveying pharmaceutical intermediates, pesticide concentrates, and various corrosive reaction media
- Textile dyeing, paper, electroplating, and brewing industries: Conveying dyeing wastewater and corrosive dye solutions, discharging pulp, circulating electroplating solutions, and handling related process liquids
- Food and beverage industry: Conveying hygienic media such as alcoholic beverages, dairy products, beverages, and syrups
- Power industry: Drainage from ash-slurry ponds, circulation of flue-gas desulfurization media, and equipment cooling-water transfer
- Iron, steel, and metallurgical industries: Conveying wastewater containing iron scale from vortex wells at steel plants, as well as settled mining wastewater and impurities
- Light industry and textile manufacturing: Conveying fiber slurries and discharging wastewater containing impurities from light-industrial processes
- Agricultural irrigation and landscaping: When equipped with a rotary-arm sprinkler, the pump can spray water into the air and disperse it into fine droplets. It is suitable for farms, nurseries, orchards, and tea plantations
- Filter press systems: Used with various types of filter presses to transfer slurry for filtration and dewatering
- Floating and surface-water operations: Suitable for operations on the water surface and capable of floating with a workboat while drawing and conveying liquid
Technical Specifications
1. Design Standards
The products are designed and manufactured with reference to ISO 2858 and GB/T 5656.
Certain series comply with JB/T 6664 - Self-Priming Pumps and other applicable standards.
The inlet and outlet flanges of the KQGX series comply with the pressure-class requirements of GB/T 9113.1. The design operating pressure is 1.0 MPa.
2. Operating Principle
The pump adopts an axial liquid-return, external-mixing self-priming system.
A liquid storage chamber is incorporated into the pump casing and communicates with the working chamber through liquid-return and circulation passages.
After the pump stops, a certain volume of liquid remains in the storage chamber.
During start-up, the high-speed rotating impeller draws in the liquid stored in the suction chamber together with the air in the suction line. The liquid and air are mixed inside the impeller and form a gas-liquid mixture under centrifugal force.
The mixture enters the gas-liquid separation chamber through the diffuser pipe. As the flow velocity suddenly decreases, the lighter gas separates from the liquid and is discharged from the pump.
The degassed liquid returns to the storage chamber and participates in the circulation again.
This process repeats continuously. The amount of air in the suction line gradually decreases until all the air has been removed and the pump completes the self-priming process. The pump then enters normal operating conditions.
3. Construction
The pump is a horizontal, single-stage, single-suction centrifugal pump.
The main components include:
- Pump casing
- Impeller
- Rear cover or pump cover
- Mechanical seal
- Pump shaft
- Bearing housing
- Inlet valve
- Gas-liquid separation pipe
- Water-filling valve
- Suction and discharge connecting pipes
The main structural configurations are as follows:
- ZX series: Split construction with a bearing frame
- ZWL series: Close-coupled construction, with the pump shaft directly connected to the motor shaft
- KQGX series: Vertical single-stage pump combined with a vacuum water-priming device
4. Direction of Rotation
When viewed from the motor side toward the pump, the impeller rotates clockwise.
5. Shaft Sealing System
The pump uses a new-generation wear-resistant mechanical seal.
The rotating and stationary seal rings can be selected according to the properties of the pumped medium. Available materials include:
- Silicon carbide
- Hard alloy
- Graphite impregnated with furan resin
The rubber components are made of fluoroelastomer.
The mechanical seal operates inside an oil chamber for extended periods, providing favorable lubrication conditions, reliable sealing performance, and long service life.
6. Material Selection for Wetted Components
|
Material |
Typical Application |
Remarks |
|
HT200 cast iron |
Neutral sewage and general industrial wastewater |
Suitable for media with pH 6–9; standard configuration |
|
Cast steel |
General industrial media |
Suitable for comparatively higher-temperature applications |
|
304 stainless steel |
General corrosive media, clean water, and seawater |
pH 1–14 for certain series |
|
316/316L stainless steel |
Highly corrosive media containing chloride ions |
Excellent resistance to pitting corrosion |
|
Fluoroplastic alloy, F46 |
Strong acids, strong alkalis, strong oxidizing agents, and other extremely corrosive media |
Specially used for the FZB series; applicable temperature: –20°C to 120°C |
|
1Cr18Ni9Ti stainless steel |
General corrosive media |
Standard configuration for the ZH series |
Material selection should be based on the actual composition, concentration, temperature, solids content, and other operating conditions of the pumped medium.
7. Operating Conditions
|
Parameter |
Specification |
Remarks |
|
Flow rate, Q |
1.5–1,200 m³/h |
Complete product range; ZX series: 3–800 m³/h; KQGX series: 180–1,200 m³/h |
|
Head, H |
5–125 m |
ZW series: 12–80 m; ZH series: 5–125 m |
|
Speed, n |
990 / 1,450 / 1,475 / 2,900 rpm |
Selected according to the pump series and operating conditions |
|
Suction lift / self-priming height |
4–7 m |
ZX series: 4–7 m; ZW series: 4.5–5.5 m; FZB series: 2–4 m |
|
Medium temperature |
0°C to 220°C |
ZH series: up to 220°C; ZWL series: ≤80°C |
|
Ambient temperature |
≤50°C |
Standard operating environment |
|
Medium density |
≤1.24 × 10³ kg/m³ |
Customized designs are available for special requirements |
|
Port diameter range |
Φ25–Φ300 mm |
Applicable inlet and outlet diameter range |
|
Motor power |
0.75–132 kW |
Calculated according to medium density and viscosity |
|
Protection rating |
IP54 / IP55 |
Configured according to requirements |
|
Insulation class |
Class F |
Standard motor configuration |
Structural Drawings

Performance Data Tables
|
Model |
Flow Rate (m³/h) |
Head (m) |
Speed (rpm) |
Shaft Power (kW) |
Motor Power (kW) |
Suction Lift (m) |
Self-Priming Time (min/5 m) |
Inlet Diameter (mm) |
Outlet Diameter (mm) |
|
25ZX3.2-20 |
3.2 |
20 |
2900 |
0.46 |
0.75 |
6.5 |
1.9 |
25 |
25 |
|
25ZX3.2-32 |
3.2 |
32 |
2900 |
0.8 |
1.1 |
6.5 |
1.8 |
25 |
25 |
|
40ZX6.3-20 |
6.3 |
20 |
2900 |
0.87 |
1.1 |
6.5 |
1.9 |
40 |
32 |
|
40ZX10-40 |
10 |
40 |
2900 |
2.7 |
4 |
6.5 |
1.5 |
50 |
40 |
|
50ZX15-12 |
15 |
12 |
2900 |
1.1 |
1.5 |
6.5 |
2.4 |
50 |
50 |
|
50ZX18-20 |
18 |
20 |
2900 |
1.8 |
2.2 |
6.5 |
1.9 |
50 |
50 |
|
50ZX12.5-32 |
12.5 |
32 |
2900 |
2.1 |
3 |
6.5 |
1.5 |
50 |
50 |
|
50ZX20-30 |
20 |
30 |
2900 |
2.6 |
4 |
6.5 |
1.5 |
50 |
50 |
|
50ZX14-35 |
14 |
35 |
2900 |
2.7 |
4 |
6.5 |
1.5 |
50 |
50 |
|
50ZX10-40 |
10 |
40 |
2900 |
2.7 |
4 |
6.5 |
1.5 |
50 |
50 |
|
50ZX12.5-50 |
12.5 |
50 |
2900 |
4.3 |
5.5 |
6.5 |
1.4 |
50 |
50 |
|
50ZX15-60 |
15 |
60 |
2900 |
6.2 |
7.5 |
6.5 |
1.3 |
50 |
50 |
|
50ZX20-75 |
20 |
75 |
2900 |
9.8 |
11 |
6.5 |
1.3 |
50 |
50 |
|
65ZX30-15 |
30 |
15 |
2900 |
1.9 |
3 |
6.5 |
2 |
65 |
65 |
|
65ZX25-32 |
25 |
39 |
2900 |
4.4 |
5.5 |
6 |
1.5 |
65 |
65 |
|
80ZX35-13 |
35 |
13 |
2900 |
1.8 |
3 |
6 |
3.4 |
80 |
80 |
|
80ZX43-17 |
43 |
17 |
2900 |
3 |
4 |
6 |
1.8 |
80 |
80 |
|
80ZX40-22 |
40 |
22 |
2900 |
4.4 |
5.5 |
6 |
1.9 |
80 |
80 |
|
80ZX50-25 |
50 |
25 |
2900 |
5.1 |
7.5 |
6 |
1.5 |
80 |
80 |
|
80ZX50-32 |
50 |
32 |
2900 |
8.2 |
11 |
6 |
1.5 |
80 |
80 |
|
80ZX60-55 |
60 |
55 |
2900 |
15.3 |
18.5 |
6 |
1.5 |
80 |
80 |
|
100ZX100-20 |
100 |
20 |
2900 |
8.2 |
11 |
6 |
1.8 |
100 |
100 |
|
100ZX100-40 |
100 |
40 |
2900 |
16.3 |
22 |
6 |
1.8 |
100 |
100 |
|
100ZX100-65 |
100 |
65 |
2900 |
27.7 |
30 |
6 |
- |
100 |
100 |
|
100ZX70-75 |
70 |
75 |
2900 |
24.2 |
30 |
6 |
- |
100 |
100 |
|
150ZX170-55 |
170 |
55 |
2900 |
38.4 |
55 |
5 |
1.8 |
150 |
150 |
|
150ZX150-80 |
150 |
80 |
2900 |
51.2 |
75 |
5 |
1.8 |
150 |
150 |
|
200ZX400-32 |
400 |
32 |
1450 |
52.3 |
75 |
5 |
2 |
200 |
200 |
|
200ZX350-65 |
350 |
65 |
2900 |
97.2 |
110 |
5 |
- |
200 |
200 |
|
250ZX550-32 |
550 |
32 |
1450 |
71.8 |
90 |
5 |
2 |
250 |
250 |
|
300ZX600-32 |
600 |
32 |
1450 |
79.2 |
90 |
5 |
2 |
300 |
300 |
If you cannot find the required specifications or model in our product range, please contact us at any time. Our technical specialists will provide prompt model selection assistance and a customized technical solution.
Hot Tags: high-efficiency energy-saving self-priming pump, China high-efficiency energy-saving self-priming pump manufacturers, factory


