DTMMC Magnetic Drive Liquid Chlorine Special Pump: Types and Replacement
DTMMC magnetic drive liquid chlorine special pump is a type of pump that is specifically designed for handling liquid chlorine, a highly hazardous chemical. Due to its unique design and construction, this type of pump is able to handle liquid chlorine safely and efficiently, without the risk of leakage or other hazardous events.
Classification Of DTMMC Magnetic Drive Liquid Chlorine Special Pump
There are several types of DTMMC magnetic drive liquid chlorine special pump available in the market, including:
Horizontal type
This type of pump is designed with a horizontal shaft and is suitable for handling liquid chlorine in large volumes.
01
Vertical type
This type of pump is designed with a vertical shaft and is suitable for handling liquid chlorine in smaller volumes.
02
Single-stage type
This type of pump has only one impeller and is suitable for handling liquid chlorine with low head requirements.
03
Multistage type
This type of pump has multiple impellers and is suitable for handling liquid chlorine with high head requirements.
04
Self-priming type
This type of pump is able to self-prime and is suitable for handling liquid chlorine in situations where a priming pump is not available.
05
Replacement Of DTMMC Magnetic Drive Liquid Chlorine Special Pump
As with any type of pump, DTMMC magnetic drive liquid chlorine special pump may require replacement due to wear and tear or other issues. When replacing this type of pump, it is important to take the following steps:
- Ensure that the new pump is compatible with the existing piping and fittings.
- Verify that the new pump has the same flow rate and head requirements as the old pump.
- Install the new pump according to the manufacturer's instructions.
- Check for leaks and ensure that the pump is functioning properly.
In addition, it is important to perform regular maintenance on the pump to ensure its continued reliability and safety. This may include replacing worn or damaged parts, checking for leaks, and cleaning the pump as needed.
Conclusion
DTMMC magnetic drive liquid chlorine special pump is a critical component in the safe handling of liquid chlorine. By understanding the different types of pumps available and following proper replacement and maintenance procedures, operators can ensure that the pump operates reliably and safely for years to come.
|
Name |
DTMMC non-leakage double-shell magnetic submerged pump/non-leakage liquid chlorine magnetic pump/double-shell liquid chlorine magnetic pump/special pump for liquid chlorine |
|
Medium |
Liquid chlorine |
|
Application |
Chlor-alkali, chemical industry, flammable, explosive, volatile, high-risk industries |
|
Product features |
Double isolation sleeve protection, secondary sealing alarm, no leakage |
|
Structure |
API685 standard, barrel type, pump and motor direct coupling connection |
|
Diameter |
25~125mm |
|
Flow rate |
1.8-400m3/h |
|
Head |
15-125m |
|
Speed |
1450/2900r/min |
|
Working temperature |
-20~+200℃ |
|
Pressure |
1.6-5.0Mpa |
|
Power |
1.5-110kw |
|
Material |
304,304L,316,316L,HC276 |
Overview
The DTMMC non-leakage double-shell magnetic submerged pump is a submerged structure pump designed for applications where the medium is prevented from leaking during the transportation process and requires a fully enclosed structure. The submerged parts that contact the liquid are all made of stainless steel. All parts are placed in liquid, with static seal design, no traditional mechanical seal, the medium can be completely isolated from the outside air, truly no leakage, especially suitable for flammable, explosive, toxic, high-risk media, with corrosion resistance range Wide, high efficiency, safe and reliable shaft connection structure, convenient disassembly, etc., can be pumped without filling liquid. Because the axial force and radial force generated by the pump operation are supported by rolling bearings and sliding bearings, the operation is quiet and noiseless. High-tech, high-tech and sustainable products that truly integrate environmental protection and energy saving, with strong corrosion resistance, good wear resistance, high mechanical strength, food grade, reasonable design, compact structure, reliable performance, convenient use and maintenance, high efficiency and high efficiency Energy saving.
Application
It is widely used in the transportation of volatile, flammable, explosive, toxic, harmful and other high-risk media in the production process of petroleum, chemical industry, coal chemical, alkali making, smelting, rare earth, pesticide, dye, medicine, scientific research institutions, and national defense industry.
Points To Note For Liquid Chlorine Magnetic Pump
The medium with a specific gravity greater than 1.3mg/cm3 should be stated when ordering;
No dry running;
It is forbidden to transport media containing particles or crystals.
- The DTMMC non-leakage double-shell magnetic submersible pump is a fully sealed, leak-free, and pollution-free double-shell structure developed and designed by our company based on HG/T2730-2012 and API685-2000. It has fewer sealing points, compact structure and versatility. Strong, vertical installation, more convenient for maintenance, new industrial pumps;
- The material of the pump body, inner rotor, pump cover, impeller, isolating sleeve and pump shaft and other wetted parts can be made of 304, 316, 316L, 904, TA2, HC276 and other materials;
- The pump body and pump cover adopt CFD computer fluid mechanics design hydraulic components for modular design and precision casting, with high cavitation resistance, accurate size, smooth flow channel, and ensure the corrosion resistance and pressure resistance of the pump;
- The impeller adopts CFD computer fluid mechanics design hydraulic components for modular design and precision casting to ensure reliable torque transmission. Its closed structure, optimized flow channel design, high efficiency and low NPSHR value ensure the stability of pump flow and head;
- The isolation sleeve is made of 316L, TA2, HC276 and other materials and low-vortex spacer design. The isolation sleeve is in a sinusoidal alternating magnetic field and induces eddy currents in the cross section perpendicular to the direction of the magnetic force and converts them into heat. The use of high resistivity, high strength 316L, TA2, HC276 and other materials has obvious effects in reducing eddy currents. It has high burst pressure resistance and high safety factor. At the same time, the pump chamber is completely isolated from the outside world, so that the pump chamber is completely in The sealed state is to achieve no leakage during transportation.
- The moving ring, bushing and sliding bearing are made of high wear-resistant and temperature-resistant crystalline silicon carbide, tungsten carbide and other materials, which have high strength, wear resistance and good willfulness, and strong corrosion resistance, which effectively guarantees the service life of the pump , The rolling bearing adopts imported NSK or SKF grease lubrication and maintenance-free bearings;
- The magnetic block uses samarium cobalt 2:17, its magnetic energy product is 28 megagauss, and its temperature tolerance is 350℃, which can avoid demagnetization to the greatest extent, making the theoretical service life of the magnetic material up to 20 years;
- The self-balancing structure of the axial force of the pump uses the principle of hydraulics to automatically balance the axial force through the fluid pressure difference. The thrust plate of the rolling bearing only bears the unbalanced axial force at the moment of starting and stopping. The direction force is almost zero, which greatly improves the stability of the whole machine operation;
- The magnetic pump adopts a double sliding bearing structure, which makes the operation more stable, so that the medium flows smoothly and the sliding bearing has the best lubrication effect; the elastic gasket structure in the shaft sleeve and the sliding bearing extends the service life of the bearing and reduces the vibration of the pump. At the same time, the expansion and cracking of sliding bearings caused by high temperature conditions are avoided;
- No leakage, all sealing points are sealed with closed static seals, driven by a magnetic coupling, without nitrogen sealing, safe, economical and efficient, and completely solved the medium leakage.
Performance Parameter
|
型号model |
转速 |
流量 |
扬程 |
效率 |
汽蚀余量 |
进口X出口 |
电机功率 |
|
25DTMMC-20 |
2900 |
1.5 |
22 |
28 |
2.5 |
25×20 |
2.2 |
|
2 |
20 |
34.5 |
2.5 |
||||
|
3.2 |
18.5 |
36 |
3 |
||||
|
25DTMMC-32 |
2900 |
1.5 |
34.3 |
24 |
2.5 |
25×20 |
3 |
|
2 |
32 |
32 |
2.5 |
||||
|
3.2 |
29.6 |
33 |
3 |
||||
|
25DTMMC-50 |
2900 |
1.5 |
52.5 |
28 |
2.5 |
25×20 |
5.5 |
|
2 |
50 |
32 |
2.5 |
||||
|
3.2 |
48 |
30 |
3 |
||||
|
25DTMMC-80 |
2900 |
1.5 |
82 |
26 |
2.5 |
25×20 |
11 |
|
2 |
80 |
30 |
2.5 |
||||
|
3.2 |
78.5 |
28 |
3 |
||||
|
32DTMMC-20 |
2900 |
2 |
22 |
40 |
2.5 |
32×20 |
2.2 |
|
3.2 |
20 |
44 |
2.5 |
||||
|
5.5 |
18.5 |
42 |
3 |
||||
|
32DTMMC-32 |
2900 |
2 |
34.3 |
40 |
2.5 |
32×20 |
3 |
|
3.2 |
32 |
44 |
2.5 |
||||
|
5.5 |
29.6 |
42 |
3 |
||||
|
32DTMMC-50 |
2900 |
2 |
52.5 |
32 |
2.5 |
32×20 |
5.5 |
|
3.2 |
50 |
36 |
2.5 |
||||
|
5.5 |
48 |
34 |
3 |
||||
|
32DTMMC-80 |
2900 |
2 |
82 |
26 |
2.5 |
32×20 |
11 |
|
3.2 |
80 |
30 |
2.5 |
||||
|
5.5 |
78.5 |
28 |
3 |
||||
|
40DTMMC-20 |
2900 |
4.4 |
22 |
41 |
2.5 |
40×25 |
2.2 |
|
6.3 |
20 |
46 |
2.5 |
||||
|
8.3 |
18.5 |
43 |
3 |
||||
|
40DTMMC-32 |
2900 |
4.4 |
34.3 |
35 |
2.5 |
40×25 |
3 |
|
6.3 |
32 |
40 |
2.5 |
||||
|
8.3 |
29.6 |
38 |
3 |
||||
|
40DTMMC-50 |
2900 |
4.4 |
52.5 |
26 |
2.5 |
40×25 |
7.5 |
|
6.3 |
50 |
33 |
2.5 |
||||
|
8.3 |
48 |
32 |
3 |
||||
|
40DTMMC-80 |
2900 |
4.4 |
82 |
24 |
2.5 |
40×25 |
11 |
|
6.3 |
80 |
28 |
2.5 |
||||
|
8.3 |
78.5 |
28 |
3 |
||||
|
50DTMMC-20 |
2900 |
7.5 |
22 |
43 |
2 |
50×32 |
3 |
|
12.5 |
20 |
51 |
2 |
||||
|
15 |
18.5 |
49 |
2.5 |
||||
|
50DTMMC-32 |
2900 |
7.5 |
34.3 |
33 |
2 |
50×32 |
4 |
|
12.5 |
32 |
44.5 |
2 |
||||
|
15 |
29.6 |
46 |
2.5 |
||||
|
50DTMMC-50 |
2900 |
7.5 |
52.5 |
28 |
2 |
50×32 |
7.5 |
|
12.5 |
50 |
37 |
2 |
||||
|
15 |
48 |
40.5 |
2.5 |
||||
|
50DTMMC-80 |
2900 |
7.5 |
82 |
23 |
2 |
50×32 |
15 |
|
12.5 |
80 |
32 |
2 |
||||
|
15 |
78.5 |
36.5 |
2.5 |
||||
|
65DTMMC-20 |
2900 |
15 |
21.8 |
37 |
2 |
65×50 |
4 |
|
25 |
20 |
57 |
2 |
||||
|
30 |
18.5 |
60 |
2.5 |
||||
|
65DTMMC-32 |
2900 |
15 |
35 |
44 |
2 |
65×50 |
5.5 |
|
25 |
32 |
53 |
2 |
||||
|
30 |
30 |
57 |
2.5 |
||||
|
65DTMMC-50 |
2900 |
15 |
53 |
41 |
2 |
65×40 |
11 |
|
25 |
50 |
50 |
2 |
||||
|
30 |
47 |
53.5 |
2.5 |
||||
|
65DTMMC-80 |
2900 |
15 |
82 |
34 |
2 |
65×40 |
18.5 |
|
25 |
80 |
46 |
2 |
||||
|
30 |
78 |
50 |
2.5 |
||||
|
65DTMMC-125 |
2900 |
15 |
127 |
28 |
2.5 |
65×40 |
30 |
|
25 |
125 |
39 |
2.5 |
||||
|
30 |
123 |
48.5 |
3 |
||||
|
80DTMMC-20 |
2900 |
30 |
22.5 |
53 |
3 |
80×65 |
7.5 |
|
50 |
20 |
57 |
3 |
||||
|
60 |
18 |
47 |
3.5 |
||||
|
80DTMMC-32 |
2900 |
30 |
36 |
52 |
2.5 |
80×65 |
11 |
|
50 |
32 |
62 |
2.5 |
||||
|
60 |
29 |
60 |
3 |
||||
|
80DTMMC-50 |
2900 |
30 |
53 |
53 |
2.5 |
80×50 |
15 |
|
50 |
50 |
60 |
2.5 |
||||
|
60 |
47 |
58 |
3 |
||||
|
80DTMMC-80 |
2900 |
30 |
84 |
44 |
2.5 |
80×50 |
30 |
|
50 |
80 |
55 |
2.5 |
||||
|
60 |
75 |
57 |
3 |
||||
|
80DTMMC-125 |
2900 |
30 |
128 |
39 |
2.5 |
80×50 |
45 |
|
50 |
125 |
48 |
2.5 |
||||
|
60 |
123 |
47.5 |
3 |
||||
|
100DTMMC-20 |
2900 |
60 |
24 |
59 |
4 |
100×80 |
11 |
|
100 |
20 |
67 |
4.5 |
||||
|
120 |
16.5 |
57 |
5 |
||||
|
100DTMMC-32 |
2900 |
60 |
36 |
56 |
3.5 |
100×80 |
15 |
|
100 |
32 |
67 |
4 |
||||
|
120 |
28 |
68 |
5 |
||||
|
100DTMMC-50 |
2900 |
60 |
54 |
57 |
3 |
100×65 |
30 |
|
100 |
50 |
67 |
3.6 |
||||
|
120 |
47 |
66 |
4.8 |
||||
|
100DTMMC-80 |
2900 |
60 |
87 |
52 |
3.5 |
100×65 |
45 |
|
100 |
80 |
63 |
3.8 |
||||
|
120 |
74.5 |
62 |
4.8 |
||||
|
100DTMMC-125 |
2900 |
60 |
133 |
48 |
3 |
100×65 |
75 |
|
100 |
125 |
57 |
3.6 |
||||
|
120 |
118 |
59 |
4.2 |
||||
|
125DTMMC-20 |
2900 |
120 |
23 |
63 |
4.5 |
125×100 |
22 |
|
200 |
20 |
72 |
4.5 |
||||
|
240 |
18 |
65 |
5 |
||||
|
125DTMMC-32 |
2900 |
120 |
35 |
57 |
3.8 |
125×100 |
30 |
|
200 |
32 |
70 |
4.2 |
||||
|
240 |
28 |
69 |
5 |
||||
|
125DTMMC-50 |
1450 |
120 |
55 |
57 |
2.5 |
150×125 |
45 |
|
100 |
50 |
70 |
2.5 |
||||
|
240 |
45 |
67 |
3 |
||||
|
150DTMMC-20 |
1450 |
120 |
132.5 |
56 |
4 |
125×100 |
22 |
|
200 |
20 |
65 |
4.5 |
||||
|
240 |
120 |
58 |
5 |
||||
|
150DTMMC-32 |
1450 |
120 |
52 |
51 |
2.5 |
125×100 |
30 |
|
200 |
32 |
57 |
2.5 |
||||
|
240 |
48.5 |
53 |
3 |
||||
|
150DTMMC-50 |
1450 |
120 |
53 |
56 |
2.5 |
150×125 |
45 |
|
200 |
50 |
65 |
2.8 |
||||
|
240 |
46 |
58 |
3.5 |
||||
|
200DTMMC-20 |
1450 |
240 |
21.5 |
68 |
3.5 |
200×150 |
37 |
|
400 |
20 |
74 |
4.3 |
||||
|
460 |
17.5 |
70 |
5 |
||||
|
200DTMMC-32 |
1450 |
240 |
37 |
62 |
3 |
200×150 |
75 |
|
400 |
32 |
74 |
3.5 |
||||
|
460 |
28.5 |
72 |
4 |
||||
|
200DTMMC-50 |
1450 |
240 |
55 |
62 |
3 |
200×150 |
110 |
|
400 |
50 |
73 |
3.8 |
||||
|
460 |
45 |
70 |
4.5 |
||||
|
250DTMMC-20 |
1450 |
600 |
22 |
75 |
4.1 |
250×200 |
75 |
|
800 |
20 |
78 |
5 |
||||
|
960 |
16 |
77 |
6 |
||||
|
250DTMMC-32 |
1450 |
600 |
34 |
73 |
4.8 |
250×200 |
90 |
|
800 |
32 |
75 |
5.5 |
||||
|
960 |
28 |
75 |
6.4 |
||||
|
250DTMMC-50 |
1450 |
600 |
54.5 |
55 |
3.5 |
250×200 |
160 |
|
800 |
50 |
68 |
4.3 |
||||
|
960 |
39 |
70 |
5 |
||||
|
300DTMMC-32 |
1450 |
1550 |
35 |
58 |
3.6 |
300×250 |
220 |
|
1400 |
32 |
74 |
4.5 |
||||
|
1300 |
26 |
65 |
5.4 |
||||
|
300DTMMC-50 |
1450 |
1550 |
55 |
65 |
4.1 |
300×250 |
315 |
|
1400 |
50 |
75 |
5 |
||||
|
1300 |
42.5 |
73 |
6 |
Hot Tags: magnetic drive liquid chlorine special pump, China magnetic drive liquid chlorine special pump manufacturers, factory, magnetic impeller pump, mag drive water pump, High Temperature Magnetic Drive Pump, mag drive turbine pump, magnetic water pump


