Fluoropolymer-Lined ZE Pump

Fluoropolymer-Lined ZE Pump

The fluoropolymer-lined ZE pump is a horizontal, single-stage, single-suction centrifugal pump based on the heavy-duty ZE petrochemical process pump. Its wetted components are lined with fluoropolymers. The casing uses a cast-steel (WCB) or cast-iron base, with an inner lining of FEP (F46), PFA or a fluoropolymer alloy. A steel mesh reinforcement structure is used to help anchor the lining. The impeller has a metal insert overmolded with fluoropolymer.
Send Inquiry
Description

Product Overview

 

The fluoropolymer-lined ZE pump is a horizontal, single-stage, single-suction centrifugal pump based on the heavy-duty ZE petrochemical process pump. Its wetted components are lined with fluoropolymers. The casing uses a cast-steel (WCB) or cast-iron base, with an inner lining of FEP (F46), PFA or a fluoropolymer alloy. A steel mesh reinforcement structure is used to help anchor the lining. The impeller has a metal insert overmolded with fluoropolymer.

The pump is designed with reference to API 610 (Centrifugal Pumps for Petroleum, Petrochemical and Natural Gas Industries) and GB/T 5656. Its OH2 centerline-mounted configuration accommodates thermal expansion at elevated temperatures. It is intended to combine the structural strength of a heavy-duty process pump with resistance to corrosive media such as acids, alkalis and strong oxidizing agents.

The stated operating-temperature range is −20°C to 150°C with an F46 lining. With a PFA lining, the stated upper temperature limit is 180–200°C. The stated operating-pressure range is 2.5–4.0 MPa, depending on configuration.

 

Product Features

 

1. Reinforced fluoropolymer lining

The casing base is made of cast steel (WCB) or cast iron. A steel mesh structure is welded to the inner wall to help secure the fluoropolymer lining to the base. The source states that this construction helps prevent the lining from separating or blistering under high-temperature, high-pressure or vacuum conditions. The flange sealing faces are fully fluoropolymer-covered to avoid exposed metal in the wetted area.

2. Process-pump design based on API 610

  • OH2 centerline mounting: Centerline support is intended to let the casing expand more evenly during high-temperature operation, helping maintain pump-to-motor alignment and reduce vibration or seal failure due to thermal distortion.
  • Heavy-duty bearing bracket: The one-piece bearing housing has cooling fins and a rigid construction. Labyrinth seals on the bearing covers help limit lubricant leakage and the ingress of contaminants.
  • Extended coupling: An extended double-disc coupling allows the rotor assembly to be removed for maintenance without moving the motor.

3. Corrosion resistance

The wetted surfaces-including the casing lining, impeller and pump-cover lining-are made from fluoropolymers such as F46, PFA or PTFE (F4). The source lists service with sulfuric, hydrochloric, nitric and hydrofluoric acids, aqua regia, strong alkalis and organic solvents.

Actual chemical compatibility depends on concentration, temperature, pressure, impurities and the specific lining grade; it should be confirmed for the intended service.

4. Hydraulic performance

The pump uses a closed impeller. Its hydraulic model is described as CFD-optimized, with high efficiency, low NPSHr and a broad operating range. The source also describes the performance curve as relatively flat, for process duties with varying flow requirements.

5. Reliable sealing system

The seal chamber dimensions are stated to conform to API 682. Mechanical seals and flushing arrangements can be selected for the operating conditions:

  • Single mechanical seal: Plans 11, 21 or 23 for general service.
  • Double mechanical seal: Plans 52 or 53 for hazardous or toxic media.
  • Metal-bellows mechanical seal: An option for elevated-temperature service.

6. Modular design and interchangeability

The bearing bracket, seal chamber and base are modular. The source states that these components have good interchangeability with standard ZE process pumps, simplifying spare-parts management.

 

Applications

 

The fluoropolymer-lined ZE pump is intended for process duties that require both a heavy-duty structure and corrosion-resistant wetted surfaces. Typical applications include:

Acid and alkali production

Transfer and circulation of inorganic acids, including sulfuric, hydrochloric, nitric and phosphoric acids.

Transfer of strong alkalis such as sodium hydroxide (NaOH) and potassium hydroxide (KOH).

Petrochemicals

Corrosive process streams at refineries and petrochemical plants, including sour wastewater and acidic hydrocarbons.

Organic chemical processes involving products such as chloroacetic acid, aniline and chlorobenzene.

Fine chemicals and pharmaceuticals

Transfer of dyes and pesticide intermediates.

Transfer of active pharmaceutical ingredients and intermediates, including halogenated or acidic/alkaline materials.

Hydrometallurgy

Acidic process streams in rare-earth extraction and precious-metal recovery.

Circulation of electrolytes and leaching solutions.

Environmental engineering

Transfer of concentrated acidic or alkaline waste liquids.

Slurry circulation in flue-gas desulfurization (FGD) systems.

New-energy materials

Transfer of lithium-battery cathode-material precursors, including nickel sulfate and cobalt sulfate.

Transfer of corrosive process media in polysilicon production.

 

Technical Specifications

 

Design and Construction

Item

Specification

Pump type

Horizontal, single-stage, single-suction, overhung centrifugal pump; API 610 OH2 type

Support arrangement

Centerline-mounted casing; no casing feet

Casing base / lining

Cast-steel WCB or cast-iron HT200 base; F46, PFA or PTFE lining

Impeller

Closed impeller; metal insert overmolded with fluoropolymer

Seal chamber

Stated to conform to API 682; multiple mechanical-seal arrangements available

Bearing bracket

Heavy-duty HT200 cast-iron bearing housing, labyrinth seals and cooling fins

Coupling

Extended double-disc coupling with openable coupling guard

Rotation

Clockwise when viewed from the motor end

 

Operating Range

Parameter

Standard range

Special configuration

Flow rate, Q

3.6–1,600 m³/h

Up to 2,600 m³/h

Head, H

3–200 m

Up to 250 m

Operating temperature

−20°C to 150°C with F46 lining

Up to 200°C with PFA lining

Operating pressure

2.5 MPa

4.0 MPa

Speed

1,450 / 2,900 / 2,950 r/min

By arrangement

Maximum stated efficiency

≤85%

-

Suitable medium viscosity

≤20 cSt

≤50 cSt

 

Material Options

Component

Standard material

Optional material

Casing base

Cast steel WCB

Cast iron HT200, 304 stainless steel

Casing lining

F46 (FEP)

PFA, PTFE (F4)

Impeller

Metal insert with F46 overmolding

Metal insert with PFA overmolding

Pump-cover lining

F46

PFA, PTFE (F4)

Shaft

2Cr13

304, 316L, 2205

Mechanical seal

Silicon carbide / tungsten carbide

Graphite / silicon carbide for media containing particles

Bearings

Domestic precision bearings

SKF / FAG / NSK

Baseplate

Q235B carbon steel

Stainless steel

 

Mechanical Seals and Flushing Plans

Operating condition

Recommended seal arrangement

Recommended plan

Clean corrosive liquid, ≤100°C

Single mechanical seal

Plan 11, self-flushing

Hot corrosive liquid, 100–150°C

Single seal with cooling jacket

Plan 21, with cooler

Small quantity of solid particles

Single seal with hard-on-hard faces

Plan 31, with cyclone separator

Hazardous, toxic or volatile media

Double mechanical seal

Plan 52 / 53, with barrier-fluid system

Crystallizing or high-viscosity media

Single seal with quench

Plan 62, steam or nitrogen quench

 

Referenced Standards

Category

Standard

Description

Design and manufacture

GB/T 5656-2008

Technical specifications for centrifugal pumps, Class II

Petrochemical pumps

GB/T 3215-2019

Centrifugal pumps for the petroleum, petrochemical and natural gas industries

Fluoropolymer-lined pumps

HG/T 3183-2012

Technical requirements for fluoropolymer-lined, single-stage, single-suction chemical centrifugal pumps

Dimensions

GB/T 5662-2013

Marking, performance and dimensions for end-suction centrifugal pumps (16 bar)

Performance testing

GB/T 3216

Acceptance tests for hydraulic performance of rotodynamic pumps

Explosion protection

GB 3836

Optional Ex d II BT4 / CT4

 

Structural Drawings

 

product-1108-739

 

 

Performance Data Tables

 

Model

Flow rate (m³/h)

Head (m)

Speed (r/min)

Efficiency (%)

NPSHr (m)

Motor rating (kW)

ZE25-25-125

1.5

22

2900

35

3

2.2

3.6

20

2900

45

3

2.2

6

16

2900

48

3

2.2

ZE40-50-125

5

22

2900

48

3

3

8

20

2900

55

3

3

12

17

2900

52

3

3

ZE40-50-160

5

32

2900

38

3.5

4

8

30

2900

55

3.5

4

12

28

2900

52

3.5

4

ZE50-50-125

8

22

2900

48

3

3

12

20

2900

55

3

3

15

17

2900

52

3

3

ZE50-50-160

8

32

2900

45

3.5

4

12

30

2900

55

3.5

4

15

28

2900

52

3.5

4

ZE50-32-200

8

52

2900

35

3.5

7.5

12

50

2900

48

3.5

7.5

15

43

2900

45

3.5

7.5

ZE50-32-250

8

82

2900

30

4

15

12

80

2900

40

4

15

25

65

2900

48

4

15

ZE65-50-160

15

32

2900

52

4

7.5

25

30

2900

60

4

7.5

35

27

2900

58

4

7.5

ZE65-50-200

15

47

2900

42

4

11

25

45

2900

55

4

11

35

38

2900

52

4

11

ZE65-50-250

15

72

2900

40

4

18.5

25

70

2900

52

4

18.5

35

65

2900

50

4

18.5

ZE80-65-160

35

32

2900

60

4.5

11

50

30

2900

65

4.5

11

60

25

2900

58

4.5

11

ZE80-50-200

35

47

2900

55

4.5

15

50

45

2900

62

4.5

15

60

42

2900

55

4.5

15

ZE80-50-250

35

72

2900

52

5

30

50

70

2900

58

5

30

60

65

2900

52

5

30

ZE100-80-160

65

32

2900

62

6

18.5

100

30

2900

68

6

18.5

110

26

2900

62

6

18.5

ZE100-80-200

65

46

2900

58

6

30

100

45

2900

65

6

30

110

40

2900

58

6

30

ZE100-65-250

60

80

2900

50

5

45

100

80

2900

60

5

45

120

75

2900

58

5

45

ZE125-100-200

120

50

2900

65

5.5

37

200

50

2900

72

5.5

55

240

45

2900

70

5.5

55

ZE125-100-250

120

80

2900

60

6

55

200

80

2900

68

6

75

250

75

2900

66

6

90

ZE150-125-250

180

80

2900

65

6.5

75

300

80

2900

70

6.5

110

350

75

2900

68

6.5

132

ZE100-80-160

50

8

1450

65

-

3

80

7.5

1450

70

-

3

ZE125-100-200

100

12.5

1450

68

-

7.5

160

12

1450

72

-

7.5

ZE150-125-250

150

20

1450

70

-

15

250

19

1450

74

-

18.5

If you cannot find the required specifications or model in our product range, please contact us at any time. Our technical specialists will provide prompt model selection assistance and a customized technical solution.

Hot Tags: fluoropolymer-lined ze pump, China fluoropolymer-lined ze pump manufacturers, factory

Send Inquiry