ZJL vertical submerged slurry pump
The ZJL vertical submerged slurry pump is a robust and efficient pump designed for use in various industries to handle abrasive and corrosive slurries. With its unique design, this pump is capable of delivering high-flow rates while operating at a low NPSH requirement.
The pump consists of a high-chrome alloy impeller that is specially designed to handle abrasive and corrosive slurries. The impeller is attached to a shaft that is supported by heavy-duty bearings, ensuring reliable operation even under the most demanding conditions.
The ZJL pump also features a unique, patented design that includes a protective liner made of wear-resistant material. This ensures that the pump's components are protected from abrasion and prolongs the life of the pump, reducing maintenance and operating costs over time.
The construction of the ZJL pump as a vertical submerged slurry pump also provides several advantages. The pump can be installed in sumps or tanks, with a minimal footprint, making it suitable for applications where space is limited. The pump's vertical design also means that it requires less floor space and is easier to maintain than traditional horizontal pumps.
In addition to its outstanding performance, the ZJL vertical submerged slurry pump is also highly versatile, capable of handling a range of materials, from coal and mineral slurries to chemicals and wastewater. This makes it an ideal option for a variety of industries, including mining, power generation, and chemical processing.
In conclusion, the ZJL vertical submerged slurry pump is a highly efficient and versatile pump designed to handle abrasive and corrosive slurries in various industries. With its unique design and features, this pump provides a reliable and cost-effective solution for pumping applications with demanding requirements.
Parameters
| Flow rate | Q=9～460 (m³/h) |
| Total head | H=10～65 (m) |
| Speed | n=1450rpm |
| S.g. | γ ≤1.5 |
| Temperature | T=0～80℃ |
| Pump diameter | 50～200mm |
Features
An updated vertical submerged slurry pump conforms to JB/T8096-1998.
Adopts a stirring impeller at the pump inlet to solve the problem of quick sedimentation of medium.
Cantilever and double-bracket structure,increases the reliability and stability during operation.
Slow speed and low linear speed design for heavy slurries to reduce the abrasion.
Different anti-abrasive materials for various applications.
Especially suitable for pumping the fluids with quick sedimentation solids.
Structure
- Single casing structure,casing is connected to the connecting pipe,and connecting pipe is connected to the bearing housing,and bearing housing is connected to the baseplate.
- Cylinder type bearing housing with rolling bearings.
- Restrictor seal without external flushing water.
- Transmission: Direct coupled,variable frequency drive.
Structure Drawing Is As Below
1. Stirring wheel
2. Pump casing
3. Impeller
4. Backplate
5. Connecting pipe
6. Shaft
7. Baseplate
8. Bearing base
9. Bearing box
10. Motor base
11. Motor coupling
12. Pump coupling
13. Bearing
14. Bearing
15. Discharge pipe
16. Bearing
17. Impeller bushing
MOC
■Material of flow passage components based on pumped medium: Cr26 wear-resistant material, or Cr30, CD4MCu wear-resistant and anti-corrosion material, and other general wear-resistant material, such as gray cast iron 200, Z-1#, C-15, ZG40Mn2.
■Material of outlet pipe, base etc. parts: Q235-A.
Application
■Sewage conveying of power plant,mining,cement,steel,non-ferrous metal.
■Fluid conveying of aluminum oxide producing process.
■Slurry conveying of sedimentation basin of other industries.
Hot Tags: vertical submerged mud pump, China vertical submerged mud pump manufacturers, factory, Long Shaft Sewage Pump, Long Shaft Submerged Pump, Single layer Casing Slurry Pump, Slurry Pump, slurry pumps, Vertical Submerged Mud Pump
