Product Overview
The FSB fluoroplastic alloy centrifugal pump is a single-stage, single-suction, cantilever centrifugal pump designed for conveying highly corrosive fluids. Manufactured using the patented material specified in National Patent No. 43 of 86.3.5, the pump casing and all wetted components are made entirely of fluoroplastic alloy, including F46 and F50.
By combining the advantages of various fluoroplastic materials, the pump offers exceptional corrosion resistance, high mechanical strength, excellent resistance to aging, and no toxic decomposition products.
Designed in accordance with international standards, the pump features a metal casing lined with polytetrafluoroethylene-propylene copolymer (F46). The pump cover, impeller, and shaft sleeve are manufactured by integrally sintering and compression-molding fluoroplastic over metal inserts. This construction effectively combines the pressure-bearing strength of the metal framework with the corrosion protection of the fluoroplastic lining.
The product range includes several configurations, such as:
FSB: Long-bracket, shaft-coupled design
FSB-D: Short-bracket, direct-coupled design
FSB-L: Long-bracket design with coupling
All models feature a horizontal, single-stage, single-suction configuration. The complete series includes more than 20 specifications, covering a wide range of flow rates and heads. These pumps can replace certain conventional metal corrosion-resistant pumps and fluoroplastic-lined pumps.
Product Features
1. Fluoroplastic Alloy Construction of All Wetted Components
The pump casing, impeller, pump cover, and all other wetted components are manufactured entirely from fluoroplastic alloy, rather than using a simple lining structure.
Steel flange rings are embedded and molded into the connections on both sides of the pump casing. A stainless-steel insert made of 1Cr18Ni9Ti is embedded and compression-molded into the right side of the pump cover. This design ensures high structural strength while providing excellent corrosion resistance.
2. Exceptional Corrosion Resistance
The pump can continuously convey highly corrosive media of various concentrations-including acids, alkalis, salts, and strong oxidizing agents-at operating temperatures ranging from −80°C to 150°C.
Fluoroplastic alloy combines the advantages of multiple fluoroplastic materials and can withstand highly corrosive media under severe operating conditions, including:
- Sulfuric acid
- Hydrochloric acid
- Nitric acid
- Acetic acid
- Hydrofluoric acid
- Aqua regia
- Strong alkalis
- Strong oxidizing agents
- Organic solvents
- Reducing agents
It is one of the most corrosion-resistant materials currently available for industrial pumping equipment.
3. Externally Mounted Bellows Mechanical Seal
The shaft seal adopts an advanced externally mounted PTFE bellows mechanical seal. The stationary ring is made of 99.9% alumina ceramic or silicon nitride, while the rotating ring is manufactured from a PTFE-based filled material, providing excellent corrosion resistance, wear resistance, and sealing performance.
The external mounting arrangement compensates for radial runout of the pump shaft. The single-end-face seal is easy to install and remove, provides clear visibility of operating conditions, and incorporates multiple layers of protection to extend the service life of the mechanical seal.
For corrosive media containing solid particles or impurities, the pump can be equipped with a waterless, single-end-face hard-on-hard mechanical seal featuring silicon carbide against silicon carbide. For special corrosive media such as strong alkalis and hydrofluoric acid, a pressureless-sintered silicon carbide seal is available.
4. Modular Design with High Interchangeability
The wetted components of both the FSB and FSB-D fluoroplastic alloy centrifugal pumps are manufactured entirely from fluoroplastic alloy.
The pump casings, impellers, mechanical seals, and other components of these two models are interchangeable. This high level of parts standardization improves spare-parts compatibility and helps reduce maintenance costs.
5. Reinforced Cast-Steel Inlet and Outlet Connections
Both the pump inlet and outlet are reinforced with cast-steel components, enhancing the overall pressure resistance of the pump.
The pressure rating of the pump system can reach 2.0 MPa.
6. Extended Coupling Design for Easy Maintenance
The pump features an extended coupling design. During maintenance, there is no need to dismantle the inlet and outlet piping, pump casing, or motor.
By removing only the intermediate coupling spacer, the rotor assembly can be withdrawn for inspection and servicing. Certain models feature a back-pull-out design, allowing the rotating assembly to be removed conveniently without dismantling the system inlet and outlet piping.
7. Compact Design and Stable Operation
The pump features a compact and rational structure, a small footprint, and convenient installation and operation.
It operates smoothly with low noise levels of ≤95 dB and minimal vibration. Its specially designed hydraulic components provide excellent flow performance and significantly reduce flow-induced noise.
8. Excellent Aging Resistance and Non-Toxicity
Fluoroplastic alloy offers excellent resistance to aging and does not produce toxic decomposition products.
The pump is therefore suitable for applications requiring stringent hygiene standards, including the food-processing and pharmaceutical industries.
Applications
The FSB fluoroplastic alloy centrifugal pump is widely used in the following industries:
Chemical Processing, Acid Production, and Alkali Production:
Conveying sulfuric acid, hydrochloric acid, nitric acid, acetic acid, hydrofluoric acid, phosphoric acid, and other acids at various concentrations, as well as alkaline media such as caustic soda and ammonia water.
Petrochemical Industry:
Conveying corrosive process fluids and organic solvents in petroleum refining and petrochemical processing units.
Pharmaceutical and Agrochemical Industries:
Conveying pharmaceutical intermediates, pesticide active ingredients, and various corrosive reaction media.
Non-Ferrous Metal Smelting:
Electrolyte circulation, rare-earth separation, and chlorine-water transfer in ion-exchange membrane chlor-alkali production projects.
Automotive Manufacturing and Surface Treatment:
Acid pickling processes, paint-finishing processes, electroplating solution transfer, and pickling-solution circulation in automotive manufacturing.
Dye and Textile Printing Industries:
Conveying dye intermediates, textile-printing wastewater, and corrosive dye solutions.
Pulp and Paper Industry:
Conveying pulp bleaching solutions and various corrosive chemicals used in papermaking processes.
Environmental Protection and Water Treatment:
Industrial wastewater treatment, neutralization of acidic and alkaline wastewater, and acid-dosing processes.
Food Processing Industry:
Conveying corrosive cleaning solutions and process fluids used in food production. Its non-toxic decomposition characteristics make it suitable for applications with stringent hygiene requirements.
Research Institutions and Defense Industries:
Conveying corrosive media in laboratory applications and specialized chemical processes for the defense industry.
Technical Specifications
1.Design Standards
The pump is designed and manufactured in accordance with the following standards:
GB/T 5662
ISO 2858 - International standard for end-suction centrifugal pumps
EN 733 / DIN 24255-11
GB/T 5657-1995, Technical Specifications for Centrifugal Pumps-Class II
Certain models are designed and manufactured in accordance with Q32128201-1999 or QISXVJ-1-2003.
2. Structural Configuration
The FSB series is a horizontal, single-stage, single-suction, cantilever centrifugal pump with axial suction and radial discharge.
Available configurations include:
- FSB: Long-bracket, shaft-coupled design
- FSB-D: Short-bracket, direct-coupled design
- FSB-L: Long-bracket design with coupling
3. Manufacturing Process for Wetted Components
The pump casing consists of a metal outer shell lined with polytetrafluoroethylene-propylene copolymer (F46).
The pump cover, impeller, and shaft sleeve are manufactured by integrally sintering and compression-molding fluoroplastic alloy over metal inserts.
4. Shaft Sealing System
The pump is equipped with an externally mounted PTFE bellows mechanical seal.
Stationary ring: 99.9% alumina ceramic or silicon nitride
Rotating ring: PTFE-based filled material
For media containing solid particles or impurities, a hard-on-hard mechanical seal-silicon carbide against silicon carbide-can be supplied.
For special operating media, a pressureless-sintered silicon carbide seal is available.
5. Operating Conditions
Rated operating pressure: Maximum pressure resistance: 0.6 MPa. The pump discharge pressure must not exceed this limit.
Pump system pressure: ≤2.0 MPa
Pump inlet pressure: ≤0.4 MPa
Fluid temperature-Standard range: −20°C to 120°C. Custom design is required for temperatures above 100°C. Special designs can accommodate −80°C to 150°C.
Ambient temperature: 0°C to 40°C
Ambient humidity: 35% to 85% RH
Solids content: Clean liquids or media containing a small amount of solid particles are recommended. Solids content should not exceed 5%. Media that generate large amounts of bubbles must not be conveyed.
Particle size:≤0.2 mm
6. Direction of Rotation
When viewed from the motor side toward the pump, the impeller rotates clockwise.
7. Important Operating Precautions
- Do not operate the pump dry. During operation, the flow rate must not be lower than 35% of the design-point flow rate.
- For suction-lift applications, the pump must be completely filled with liquid before startup.
- If cavitation occurs during operation, stop the pump within one minute.
- Fluid temperature changes should be controlled within 40°C. Excessive heating or cooling may damage pump components.
- If the ambient temperature is lower than the freezing point of the fluid after shutdown, drain the pump completely to prevent freeze damage.
- For long-term shutdown, drain all liquid from the pump and flush it thoroughly with clean water. The sealing components must also be carefully rinsed, and the inlet and outlet ports should be properly sealed for storage.
The bearing temperature rise should not exceed 40°C, and the bearing temperature must not exceed 90°C.
8. Material Selection
Wetted components: F46 - polytetrafluoroethylene-propylene copolymer; F50 fluoroplastic alloy; ultra-high-molecular-weight polyethylene
Metal inserts and reinforcing components: Stainless steel, including 1Cr18Ni9Ti; cast steel
Stationary ring: 99.9% alumina ceramic; silicon nitride
Rotating ring: PTFE-based filled materials; silicon carbide; hard alloy
9. General Performance Range
Flow rate, Q: 1.5–100 m³/h; up to 125 m³/h for certain extended models
Head, H: 10–60 m; 15–55 m for the standard series
Speed, n: 2,900 r/min, direct motor drive
Maximum pressure resistance:≤0.6 MPa; pump discharge pressure must not exceed this value
System pressure: ≤2.0 MPa, the maximum system pressure that the pump casing can withstand
Fluid temperature: −20°C to 120°C; special designs available for −80°C to 150°C
Inlet diameter: 25–100 mm for the standard series
Motor power: 1.5–37 kW, calculated according to fluid density and viscosity
NPSH required: 3.0–4.5 m, depending on the model
Efficiency: 39%–77%, generally increasing with flow rate
Protection rating: IP55, standard configuration
Insulation class: Class F, motor insulation
The above values represent the general performance range of the FSB series. Actual operating parameters should be confirmed according to the specific model, fluid properties, installation conditions, and selected motor configuration.
Structural Drawings

Performance Data Tables
|
Model |
Flow Rate (m³/h) |
Head (m) |
Connection Size |
Motor Power |
Speed (r/min) |
Suction Lift |
Efficiency |
|
|
Inlet (mm) |
Outlet (mm) |
|||||||
|
25FSB-10L |
1.5 |
10 |
25 |
20 |
1.5 |
2900 |
6 |
29 |
|
25FSB-18L |
3.6 |
18 |
25 |
20 |
2.2-3 |
2900 |
6 |
27 |
|
40FSB-15L |
5 |
15 |
40 |
32 |
3 |
2900 |
6 |
40 |
|
40FSB-20L |
10 |
20 |
40 |
32 |
3 |
2900 |
6 |
42 |
|
40FSB-30L |
10 |
30 |
40 |
32 |
3-4 |
2900 |
6 |
38 |
|
40FSB-40L |
10 |
40 |
40 |
32 |
4-5.5 |
2900 |
5.5 |
35 |
|
40FSB-50L |
10 |
50 |
40 |
32 |
5.5-7.5 |
2900 |
5 |
33 |
|
50FSB-20L |
15 |
20 |
50 |
40 |
3-4 |
2900 |
6 |
51 |
|
50FSB-25L |
15 |
25 |
50 |
40 |
4 |
2900 |
6 |
49 |
|
50FSB-30L |
15 |
30 |
50 |
40 |
4 |
2900 |
6 |
44.5 |
|
50FSB-40L |
15 |
40 |
50 |
32 |
4.5-5.5 |
2900 |
5.5 |
35 |
|
50FSB-50L |
15 |
50 |
50 |
32 |
5.5-7.5 |
2900 |
5.5 |
33 |
|
50FSB-63L |
15 |
63 |
50 |
32 |
11 |
2900 |
5.5 |
30 |
|
65FSB-32L |
29 |
32 |
65 |
50 |
5.5 |
2900 |
6 |
57 |
|
65FSB-40L |
29 |
40 |
65 |
40 |
11 |
2900 |
5.5 |
53 |
|
65FSB-50L |
29 |
50 |
65 |
40 |
15 |
2900 |
5.5 |
46 |
|
65FSB-64L |
29 |
64 |
65 |
50 |
15-18.5 |
2900 |
5.5 |
44 |
|
80FSB-20L |
50 |
20 |
80 |
65 |
5.5 |
2900 |
6 |
69 |
|
80FSB-30L |
50 |
30 |
80 |
65 |
7.5 |
2900 |
5.5 |
64 |
|
80FSB-34L |
50 |
34 |
80 |
65 |
11 |
2900 |
5.5 |
64 |
|
80FSB-40L |
50 |
40 |
80 |
50 |
11-15 |
2900 |
5.5 |
60 |
|
80FSB-50L |
50 |
50 |
80 |
50 |
15-18.5 |
2900 |
6 |
53 |
|
80FSB-55L |
50 |
55 |
80 |
50 |
15-18.5 |
2900 |
5.5 |
47 |
|
80FSB-80L |
50 |
80 |
80 |
50 |
30-37 |
2900 |
5.5 |
36 |
|
100FSB-32L |
100 |
32 |
100 |
80 |
18.5-22 |
2900 |
5.5 |
70 |
|
100FSB-40L |
100 |
40 |
100 |
80 |
18.5-22 |
2900 |
5.5 |
70 |
|
100FSB-50L |
100 |
50 |
100 |
65 |
22-30 |
2900 |
5.5 |
62 |
|
125FSB-32L |
125 |
32 |
125 |
80 |
22 |
2900 |
5.5 |
72 |
|
125FSB-40L |
125 |
40 |
125 |
80 |
30 |
2900 |
5.5 |
70.9 |
|
125FSB-50L |
125 |
50 |
125 |
100 |
37 |
2900 |
5.5 |
64 |
|
150FSB-22L |
190 |
22 |
150 |
100 |
18.5 |
1450 |
6 |
77 |
|
150FSB-35L |
190 |
35 |
150 |
100 |
30 |
1450 |
5 |
75 |
|
150FSB-42L |
190 |
42 |
150 |
100 |
55 |
1450 |
4.5 |
70 |
|
200FSB-20L |
200 |
20 |
200 |
150 |
37 |
1450 |
3 |
81 |
|
200FSB-32L |
200 |
32 |
200 |
150 |
55 |
1450 |
3 |
79 |
If you did not find the required parameters or models in our products, please feel free to contact us. Our company's technical staff will provide you with quick selection and customized technical solutions.
Hot Tags: fsb fluoroplastic alloy centrifugal pump, China fsb fluoroplastic alloy centrifugal pump manufacturers, factory


