Forced-Circulation Pump

Forced-Circulation Pump

The forced-circulation pump—also known as an evaporator forced-circulation pump or axial-flow evaporator circulation pump—is a single-stage, single-suction, cantilever axial-flow pump developed for demanding operating conditions involving large flow rates and low heads.
The pump is designed and manufactured in accordance with GB/T 13008, Technical Conditions for Mixed-Flow Pumps and Axial-Flow Pumps. It is widely used in the forced-circulation loops of chemical evaporation and crystallization systems.
Send Inquiry
Description

Product Overview

 

The forced-circulation pump-also known as an evaporator forced-circulation pump or axial-flow evaporator circulation pump-is a single-stage, single-suction, cantilever axial-flow pump developed for demanding operating conditions involving large flow rates and low heads.

The pump is designed and manufactured in accordance with GB/T 13008, Technical Conditions for Mixed-Flow Pumps and Axial-Flow Pumps. It is widely used in the forced-circulation loops of chemical evaporation and crystallization systems.

By increasing the heat-transfer coefficient of the heat exchanger, the pump helps improve:

  • Evaporator production capacity
  • Heat-transfer efficiency
  • Circulation stability
  • Overall system efficiency

It is therefore a key piece of rotating equipment in industrial evaporation and crystallization processes.

 

Operating Principle

Unlike centrifugal pumps, which rely primarily on centrifugal force, an axial-flow pump uses the thrust or lift generated by the rotating impeller blades to move the liquid along the pump shaft direction.

As the impeller rotates, a low-pressure region is created at the suction side. The external liquid enters under the action of atmospheric or system pressure and is discharged through the guide passage, completing the high-flow, low-head circulation process.

According to installation configuration, the pump may be supplied in the following forms:

  • Horizontal elbow type
  • Rear pull-out three-way type
  • Vertical axial-flow type

According to blade adjustment, the pump may be configured with:

  • Fixed-pitch blades
  • Semi-adjustable blades
  • Fully adjustable blades

 

Product Features

 

1. High-Flow, Low-Head Axial-Flow Hydraulic Design

The pump is specially designed for high-volume circulation duties. Its low-head characteristics allow a large circulation flow to be achieved with relatively low energy consumption in closed-loop systems.

The pump provides:

  • Wide flow coverage
  • High hydraulic efficiency
  • A broad efficient operating range
  • Stable performance near the rated duty point

The operating point can be adapted by adjusting the blade installation angle or pump speed, providing significant energy-saving potential.

 

2. Excellent Cavitation Resistance

The hydraulic model is optimized using computational fluid dynamics. The pump provides good cavitation resistance and is suitable for low-liquid-level evaporator applications.

  • This can help:
  • Reduce the required elevation of the evaporation plant
  • Lower civil-construction costs
  • Simplify evaporator arrangement
  • Improve circulation reliability

Some series use specially designed airfoil blades to further improve cavitation performance.

 

3. Low-Speed Operation and Reduced Crystal Breakage

The rotational speed is generally no higher than 980 r/min in typical evaporator service.

Compared with high-speed centrifugal pumps, the lower speed causes less disturbance to the pumped medium. This can substantially reduce crystal breakage during evaporation and crystallization, making the pump suitable for processes where the size and morphology of the final crystals must be preserved.

 

4. Cantilever Rotor and Back-Pull-Out Construction

The pump uses a cantilever rotor with front- or rear-access maintenance arrangements.

During inspection and servicing, the pump casing and suction and discharge piping generally do not need to be removed. The rotor assembly can be withdrawn as a complete unit, which helps:

  • Shorten maintenance time
  • Reduce shutdown duration
  • Lower maintenance costs
  • Simplify replacement of rotating components

 

5. Multiple Shaft-Sealing Options

The sealing arrangement can be selected according to the process conditions. Available configurations include:

  • Auxiliary impeller combined with a cartridge-type double mechanical seal
  • Cartridge-type double mechanical seal
  • Double packing seal
  • Typical reference service lives are:
  • Cartridge mechanical seal: approximately 6–12 months
  • New liquid-blocking packing seal: approximately 3–6 months

The final seal configuration should be selected according to the medium's temperature, pressure, volatility, toxicity, crystallization tendency, and solids content.

 

6. Heavy-Duty Bearings and Modular Bearing Housing

The bearing housing uses a long-span, heavy-duty structural design. It provides good rigidity, high load capacity, and stable operation.

The bearing housing can be equipped with:

  • A water-cooling chamber
  • Cooling ribs
  • Grease or oil lubrication arrangements

For high-temperature duties, the bearing housing may be fitted with water cooling. High-temperature, wear-resistant grease can also be used to extend bearing service life and support long-term continuous operation.

 

7. Flexible Drive and Installation Arrangements

The pump can be driven by several transmission arrangements, including:

  • Flexible-coupling direct drive
  • V-belt drive
  • Gear reducer with universal-joint drive
  • Fluid coupling
  • Other application-specific drive systems

Possible installation arrangements include:

  • Horizontal installation
  • Vertical installation
  • Suspended installation

This flexibility allows the pump to accommodate different process layouts and available installation spaces.

 

8. Wide Range of Construction Materials

Wetted components can be manufactured from a broad range of materials, including:

  • ZC30 carbon steel
  • SUS304 stainless steel
  • SUS316L stainless steel
  • CD4MCu
  • 2205 duplex stainless steel
  • Titanium TA2
  • Monel alloys
  • Hastelloy alloys
  • Inconel alloys
  • 904L stainless steel

These material options allow the pump to handle demanding media such as:

  • High-temperature chloride-containing slurries
  • Strong acids
  • Concentrated alkalis
  • Crystallizing salt solutions
  • Corrosive evaporation and crystallization liquors

 

Applications

 

The forced-circulation pump serves as the circulation power source for various evaporation, concentration, and crystallization systems.

Main Industrial Applications

  • Salt production: Forced circulation in sodium chloride evaporative crystallizers used in vacuum salt-making plants
  • Chlor-alkali industry: Forced circulation of sodium hydroxide solutions containing sodium chloride in diaphragm-process caustic soda evaporators; circulation of calcium chloride media in ammonia-distillation waste-liquid recovery
  • Combined soda-ash process: Forced circulation of ammonia mother liquor in ammonium chloride cooling and salting-out crystallizers
  • Phosphate processing: Circulation in wet-process phosphoric acid concentrators, ammonium phosphate slurry concentrators, and nitrophosphate evaporators
  • Alumina production: Forced circulation of sodium aluminate alkaline liquor in Bayer-process evaporators
  • Non-ferrous and hydrometallurgy: Circulation of copper sulfate, nickel sulfate, and other evaporation-crystallization liquors
  • Titanium dioxide production: Circulation of titanium dioxide acidulation liquor in concentration and evaporation systems
  • Sodium sulfate production: Circulation of sodium sulfate evaporation media
  • Light industry: Evaporation, concentration, and crystallization of lactic acid, alcohol, citric acid, monosodium glutamate, sugar solutions, and similar products
  • Pulp and paper: Forced circulation of black liquor concentrators
  • Flue-gas desulfurization and coking: Circulation in ammonium sulfate evaporative crystallizers used in power plants, coke-oven plants, and chemical-fiber facilities
  • Desalination and wastewater treatment: Circulation in seawater desalination systems and advanced treatment systems for saline wastewater evaporation and crystallization

 

Technical Specifications

 

1. Design Standards

The pump is designed in accordance with:

GB/T 13008 - Technical Conditions for Mixed-Flow Pumps and Axial-Flow Pumps

Selected high-specification series may also refer to relevant API 610 requirements where applicable

API 610 compliance should be confirmed separately for each model and project specification. Reference to API 610 does not necessarily mean that every pump configuration is fully API 610 compliant.

 

2. Structural Configuration

The pump is a single-stage, single-suction, cantilever axial-flow pump.

The pump casing may be manufactured as:

  • Cast construction
  • Fabricated welded-steel construction

The pump casing and bearing-support housing are each fitted with support feet and installed on a common baseplate.

Available structural configurations include:

  • Horizontal elbow type
  • Rear pull-out three-way type
  • Vertical axial-flow type

Available impeller configurations include:

  • Fixed-pitch blades
  • Semi-adjustable blades
  • Fully adjustable blades

 

3. Drive Arrangements

The following drive systems may be used:

  • Flexible-coupling direct drive
  • V-belt drive with speed adjustment
  • Gear-reducer drive for high-power, low-speed applications
  • Fluid-coupling drive
  • Universal-joint drive

 

4. Lubrication and Cooling

The bearings may use:

  • High-temperature, wear-resistant grease
  • Oil lubrication

The bearing housing may be equipped with a water-cooling jacket or cooling ribs. For high-temperature service, cooling water can be circulated through the bearing housing to maintain stable bearing operating conditions.

 

5. Cavitation Performance

The pump uses a high-efficiency, cavitation-resistant hydraulic design and can operate under relatively low liquid-level conditions.

This enables:

  • Lower evaporator installation elevations
  • Reduced building height
  • Lower civil-construction cost
  • Greater flexibility in the design of reverse-circulation evaporators
  • Application in evaporators with two heating chambers

 

6. General Operating Conditions

Parameter

General Range

Flow rate

150–45,000 m³/h

Maximum flow for selected 2,000 mm models

Up to 45,000 m³/h

Head

1.5–12 m

Operating pressure

≤ 1.0 MPa; selected special series up to 2.5 Mpa

Operating temperature

−20°C to +200°C

Special high-temperature designs

Up to approximately 480°C

Solids content

Up to approximately 35%, subject to particle characteristics

Applicable media

Suspensions, hot crystallizing salt slurries, corrosive acids, alkalis, and other process liquids

The allowable solids content depends not only on concentration but also on particle size, hardness, crystal shape, viscosity, temperature, and wear characteristics.

 

Structural Drawings

 

2

 

 

Performance Data Tables

 

Model

Flow Rate (m³/h)

Flow Rate (L/s)

Head (m)

Speed (r/min)

Efficiency (%)

Shaft Power (kW)

FJX100-5

97

27

5

2900

61.2

2.16

FJX100-3

97

27

3

2900

61.5

1.29

FJX100-2

67

19

2.3

1900

61

0.69

FJX125-5

173

48

5

2900

61.8

3.81

FJX125-3

173

48

3

2900

62.2

2.27

FJX125-2.5

119

33

2.3

1900

61.5

1.21

FJX150-6

306

85

6

2900

62.8

7.96

FJX150-4

306

85

4

2900

63

5.29

FJX150-3

212

59

2.8

1900

62.6

2.59

FJX200-4

396

110

4

1450

63.5

6.79

FJX200-3

396

110

3

1450

63.8

5.07

FJX250-5-L

680

189

5

1450

64.6

14.34

FJX250-5

756

210

5

1450

64.9

15.86

FJX250-4

756

210

4

1450

65.2

12.63

FJX250-2.3

508

141

2.3

980

64.8

4.91

FJX300-7

1260

350

7

1450

67.8

35.43

FJX300-5-L

882

245

5

980

69.3

17.33

FJX300-5

1260

350

5

980

69.2

24.79

FJX350-7

1440

400

7

1450

70.1

39.16

FJX350-5

1368

380

5

980

70.3

26.5

FJX350-3.2

972

270

3.2

980

69.5

12.19

FJX400-7

2160

600

7

980

70.1

58.74

FJX400-5

2160

600

5

980

70.2

41.9

FJX400-4.5

2002

556

4.5

980

70.6

34.74

FJX400-4

1631

453

4

740

69.8

25.45

FJX450-7

2952

820

7

980

70.3

80.05

FJX450-5

2952

820

5

980

70.5

57.02

FJX450-4

2228

619

4

740

70

34.68

FJX500-7

3636

1010

7

980

70.3

98.6

FJX500-5

3204

890

5

740

70.8

61.62

FJX500-4

2747

763

4

740

70.1

42.68

FJX550-7

4140

1150

7

740

70.4

112.1

FJX550-5

4140

1150

5

740

71

79.4

FJX550-4.4

3301

917

4.4

590

70

56.51

FJX600-7

5040

1400

7

740

70.6

136.09

FJX600-5

4320

1200

5

590

70.9

82.97

FJX600-4.4

4018

1116

4.4

590

70.2

68.58

FJX700-7

6660

1850

7

590

70.7

179.58

FJX700-5

6660

1850

5

590

70.8

128.09

FJX700-4.8

5533

1537

4.8

490

70.4

102.74

FJX800-7

9360

2600

7

590

71.2

250.61

FJX800-5

8460

2350

5

490

71.3

161.57

FJX800-4.8

7772

2159

4.8

490

70.8

143.5

FJX900-7

11340

3150

7

490

71.5

302.34

FJX900-5

11340

3150

5

490

71.8

215.06

FJX900-4

8564

2379

4

370

71.2

131.03

FJX1000-7

14040

3900

7

490

72.1

371.22

FJX1000-5

12780

3550

5

370

71.7

161.13

FJX1100-7

16560

4600

7

370

71.9

439.06

FJX1100-5

15840

4400

5

370

72.1

299.15

FJX1200-7

20520

5700

7

370

71.8

544.81

FJX1200-5

20520

5700

5

370

72.3

386.46

If you cannot find the required specifications or model in our product range, please contact us at any time. Our technical specialists will provide prompt model selection assistance and a customized technical solution.

Hot Tags: forced-circulation pump, China forced-circulation pump manufacturers, factory

Send Inquiry