All Categories

Contact Us

CZ Chemical process pump

ApplicationChlor-alkali, soda ash industry; medicine, fertilizer, pesticide; petrochemical, chemical fiber, paper industry; dye industry; environmental protection engineering and water treatment system.Structure of CZ chemical pumpHorizontal back door structure, pump head and motor are connect
`
  • Application
  • Design Feature
  • Model and Parameter
  • Material of Construction
  • Installation Drawing
  • Performance curve

Application

Chlor-alkali, soda ash industry; medicine, fertilizer, pesticide; petrochemical, chemical fiber, paper industry; dye industry; environmental protection engineering and water treatment system.

 

Structure of CZ chemical pump

Horizontal back door structure, pump head and motor are connected by coupling, installed on the bottom plate, impeller is back open, three bearings, shaft seal adopts external mechanical seal, with cooling device, oil level of bearing body is observed by oil microscope; the structure is compact and reasonable.

The pump has legs cast on the pump body, which can bear the load from the pipeline and transfer it to the foundation directly. In this way, the pump rotor will not be bent due to the load borne by the pump, thus ensuring the best service life of the bearing and mechanical seal.

It is not necessary to open the pipeline connected with the pump body during maintenance. As long as the bolts of bracket and pump body are opened, the impeller and mechanical seal can be maintained, which is simple and convenient.

Pump rotation direction: from the motor end to the pump, clockwise rotation.




This series of pumps is developed by our company with the introduction of foreign advanced technology. It can transport media containing solid particles and easy to crystallize, and is resistant to temperature, corrosion and no blockage. The material can be selected according to specific working conditions.


CZ Chemical process pump

Flow rate: 1.6-1500m3/h

Head:  5-125m

Working pressure: P less than or equal to 1.6MPa

Working temperature: -20 ~ +150℃

Sealing type: Mechanical seal or packing seal


Specification parameter


Contact Us